OWNER'S MANUAL MINI COOPER MINI COOPER S Contents From A to Z Online Edition for Part No.
Online Edition for Part No.
CONGRATULATIONS ON YOUR NEW MINI This Owner's Manual should be considered a permanent part of this vehicle. It should stay with the vehicle when sold to provide the next owner with important operating, safety and maintenance information. This manual is supplemented by a Service and Warranty Information Booklet for US models or a Warranty and Service Guide Booklet for Canadian models. We recommend that you read this publication thoroughly.
Using this Owner's Manual At a glance Controls and features Notes on the Owner's Manual 6 Symbols used 6 Symbol for vehicle parts 6 Your individual vehicle 6 Editorial notice 7 For your own safety 8 Reporting safety defects 9 Cockpit 12 Display elements 13 Display elements with navigation system 14 Indicator and warning lamps 15 Multifunction steering wheel MFL 18 Opening and closing: Keys 22 Central locking system 23 Opening and closing – from outside 23 Opening and closing – from inside 26 Tailgate 2
Loading and transporting cargo: Luggage compartment cover 71 Foldable rear backrest 71 Loading cargo 72 Roof-mounted luggage rack 73 DATA REPAIRS Wheels and tires: Tire inflation pressure 80 Tire condition 82 Tire replacement 83 Wheel and tire combinations 84 Winter tires 85 Snow chains 85 INDEX Interior conveniences: Glove compartment 70 Ashtray/Beverage holder 70 Cigarette lighter 70 Special operating instructions: Break-in procedures 76 General driving notes 76 Refueling 77 Fuel specifications 78 A
CONTENTS In the engine compartment: Hood 86 Engine compartment – MINI COOPER 87 Engine compartment – MINI COOPER S 88 Washer fluid 89 Engine oil 89 Coolant 91 Brake fluid 92 Maintenance and care: MINI Maintenance System 93 Caring for your vehicle 94 Vehicle immobilization 96 Laws and regulations: OBD interface socket 96 Technical modifications 96 California Proposition 65 Warning 97 4 Owner Service Procedures Technical data Replacement procedures: Onboard tool kit 100 Windshield wiper blades 100 Lamps a
OVERVIEW Index INDEX DATA REPAIRS OPERATION CONTROLS Everything from A to Z 128 Online Edition for Part No.
Notes on the Owner's Manual Symbols used Your individual vehicle In compiling this Owner's Manual we have made every effort to furnish you with a convenient reference source affording quick access to all the essentials. The fastest way to find detailed information on any specific subject is to turn to the comprehensive index at the back of the manual. If you wish to gain an initial overview of your vehicle, you will find this in the first chapter.
OVERVIEW Editorial notice OPERATION CONTROLS The manufacturer pursues a policy of continuous, ongoing development that is conceived to ensure that the MINI continues to embody the highest quality and safety standards combined with advanced, state-of-the-art technology. For this reason, it is possible that the features described in this Owner's Manual could differ from those on your vehicle. Nor can errors and omissions be entirely ruled out.
For your own safety Use unleaded gasoline only. Fuels containing up to and including 10% ethanol or other oxygenates with up to 2.8% oxygen by weight (i.e. 15% MTBE or 3% methanol plus an equivalent amount of co-solvent) will not void the applicable warranties with respect to defects in materials or workmanship. Field experience has indicated significant differences in fuel quality (volatility, composition, additives, others) among gasolines offered for sale in the United States and Canada.
OVERVIEW CONTROLS The following only applies to vehicles owned and operated in the US. INDEX DATA To contact NHTSA, you may either call the Auto Safety Hotline toll-free at 1-800-424-9393 (or 366-0123 in Washington, D.C. area) or write to: NHTSA, U.S. Department of Transportation, Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from the Hotline.
10 Online Edition for Part No.
OWNER SERVICE PROCEDURES TECHNICAL DATA INDEX Overview Online Edition for Part No.
COCKPIT 1 > Parking lamps/Low beams 49 > Turn signal indicators 49 > Standing lamps 49 > High beams 49 > Headlamp flasher 49 > Computer 58 12 2 3 4 5 Washer/Wiper system 51 Instrument lighting 50 Outside mirror adjustment 36 Hazard warning flashers 6 7 8 9 Hood release 86 Horn 18 Steering wheel adjustment 35 OBD interface socket 96 Online Edition for Part No.
4 Indicator for > Odometer 55 > Trip odometer 55 > Service Interval 57 2 Display for computer 58 > Program display for Continuously 3 Speedometer with indicator and warning Variable Transmission (CVT) 48 lamps, see from page 15 5 Trip odometer, reset to zero 55 6 Fuel gauge 55 7 Engine coolant temperature gauge 56 INDEX 1 Tachometer 55 with indicator and warning lamps, see from page 15 DATA REPAIRS OPERATION CONTROLS OVERVIEW DISPLAY ELEMENTS Online Edition for Part No.
DISPLAY ELEMENTS WITH NAVIGATION SYSTEM * 1 Tachometer 55 with indicator and warning lamps, see from page 15 2 Display for computer 58 14 3 Speedometer with indicator and warning 5 Indicator for lamps, see from page 15 > Odometer 55 > Trip odometer 55 4 Trip odometer, reset to zero 55 > Service Interval 57 > Program display for Continuously Variable Transmission (CVT) 48 Online Edition for Part No.
Do not continue driving, otherwise, the engine could be damaged because of inadequate lubrication.< CONTROLS OPERATION If the drive belt is defective, do not With navigation system option: continue driving. The engine could be Coolant temperature warning damaged due to overheating. When the lamp in the speedometer ● power-assist is deactivated, increased If the lamp comes on while opersteering effort is required.< ating the vehicle, the engine has overheated.
INDICATOR AND WARNING LAMPS Yellow: stop immediately Flat Tire Monitor ● Flashes: tire failure. Red and yellow: continue to drive; drive cautiously Red: an important reminder Brake warning lamp Brake warning lamp together with with parking brake applied. yellow indicator lamps for ABS, EBV More information on the parking Reduce speed immediately and and ASC+T/DSC: brake on page 44 stop the vehicle.
"Service Engine Soon" warning lamp for Canadian models. Turn signal indicators Flashes when turn signal indicator is on, also for trailer towing. Rapid flashing: the system is defective. More information on page 49 Cruise control* Lights up when the cruise control is activated. Operation via the multifunction steering wheel. More information on page 53 INDEX Engine electronics* ● Blue: for your information Malfunction in the engine elecABS indicator lamp for Canadian High beams tronics.
MULTIFUNCTION STEERING WHEEL MFL * The control buttons integrated within the MFL multifunction steering wheel have been designed to allow you to operate a number of accessories both quickly and safely, without taking your eyes from the road: > Some audio source functions > Cruise control. The illustration shows the possible full equipment level. For further details, please consult the description of the relevant item of equipment.
OVERVIEW CONTROLS OPERATION REPAIRS DATA INDEX Online Edition for Part No.
20 Online Edition for Part No.
OWNER SERVICE PROCEDURES TECHNICAL DATA INDEX Controls Online Edition for Part No.
KEYS Initializing the master key with remote control When you activate a master key with remote control (replacement, additional key or after a battery change), it must be initialized. This initialization can be performed in two ways: Press button 1 or button 2, see page 24, four times in succession Depending on the equipment fitted, your MINI has up to three key variations: 1 Master key with remote control and battery If the battery is discharged, please consult your MINI center.
The concept Via remote control For US owners only The central locking system is ready for operation whenever the driver's door is closed. The doors, the tailgate and the fuel filler door are unlocked or locked. The remote control gives you an exceptionally convenient method for unlocking and locking your vehicle. It also offers another function: The transmitter and receiver units comply with part 15 of the FCC (Federal Communication Commission) regulations.
OPENING AND CLOSING – FROM OUTSIDE To unlock To lock and secure Press button 2. 1. Press button 1 once to unlock the The hazard warning system flashes once. driver's door only 2. Press button 1 a second time to unlock Do not lock the vehicle if there are the other door as well as the tailgate and passengers still inside, because they the fuel filler door. cannot unlock the doors.< When the vehicle is unlocked, the hazard warning system does not react.
You can also operate the power windows and the sliding/tilt sunroof via the door lock. Turn the key to the extreme left or right to unlock/lock the door. > To open: with the door closed, turn the key to the "Unlock" position and hold it > To close: with the door closed, turn the key to the "Lock" position and hold it. Via the door lock Watch during the closing process to be sure that no one is injured. Releasing the key stops the operation.< REPAIRS 1.
OPENING AND CLOSING – FROM INSIDE The central locking system can be locked automatically as soon as you begin to drive if you desire. This can be adjusted to be vehicle-specific.< To lock To unlock and open the doors press the individual safety lock buttons down. 1. Touch the switch for the central locking system 2. Pull the door handle above the armrest With this switch, you operate the central locking system when the doors are closed. The doors and tailgate are unlocked or locked only.
In the event of an electrical malfunction, The handle recesses in the interior trim you can also operate the tailgate manually. panel of the tailgate make it easier to pull the lid down. 3. Fold the rear seat bench upwards Opening with the remote control, see page 24. 4. Pull the ring. The tailgate is unlocked. To avoid injuries, be sure that the travel path of the tailgate is clear when it is closed, as with all closing procedures. Operate the vehicle only when the tailgate is closed.
ELECTRIC POWER WINDOWS To close: After the ignition has been switched off: Press the switch upwards. The window closes until you release the switch You can use the electric power windows as long as no one opens any of the doors. If a door is opened during operation, the opening/closing process stops immediately. or when the engine is running: Briefly press the switch upwards. The window closes automatically. Pressing the switch again stops the operation.
After the ignition has been switched off: You can still operate the sliding/tilt sunroof for up to one minute, as long as no one opens any of the doors. If a door is opened during operation, the opening/closing stops immediately. Automatic opening and closing Raising – Opening – Closing To open: From ignition key position 1: Press the switch To close: or 1. Push the switch past the resistance point: The sunroof closes to the raised position 2. Push the switch again: The sunroof closes completely.
SLIDING/TILT SUNROOF * ROLLER SUN BLIND* Safety feature As of approximately the middle of the roof opening, if the sliding/tilt sunroof encounters resistance during closing, the closing operation is interrupted and the sunroof opens again slightly. Despite this safety feature, be extremely careful that the closing path of the sunroof is not obstructed whenever it is closed. Otherwise, triggering the closing-force limitation may not be ensured in some situations (with very thin objects, for instance).
Sitting correctly with airbags Adjusting the seats, see next page. INDEX Always maintain an adequate distance between yourself and all of the airbags. Always hold the steering wheel by the rim with the hands at the 9 and 3 o'clock positions to keep any chance of injury to hands or arms to an absolute minimum, should the airbag be deployed. No one and nothing is to come between the airbags and the seat occupant.
SEAT ADJUSTMENT Longitudinal seat adjustment Seat height Lumbar support* 1. Lift the handle 2. Push the seat into the desired position 3. After releasing the handle, apply pressure to the seat to ensure that the latch engages securely. 1. To raise: Pull the handle up repeatedly, continuing until the seat reaches the desired height 2. To lower: Push the handle repeatedly, continuing until the seat reaches the desired height.
Easy Entry 1. Pull the lever at the inside of the seat 2. Apply weight to or remove weight from the backrest as required 3. Release the lever so that the backrest locks into place. 1. Press the lever on the outside of the seat downwards, see arrow 1. The backrest folds forward automatically 2. Push the seat forwards, see arrow 2. Original position CONTROLS INDEX 1. Push the seat back into its home position 2. Fold the backrest back to the home position to lock the seat.
HEATED SEATS* HEAD RESTRAINTS Installation 1. Press the button and at the same time insert the head restraint in the reception points 2. Adjust the head restraint. The seat cushion and backrest can be heated with the ignition key in position 2. Select the temperature setting: To avoid possible violation of traffic laws, never retract the head restraints unless the rear seats are empty. Always ensure that the head restraints are raised before transporting passengers in the rear seat.
STEERING WHEEL Use the height adjustment mechanism to adapt the safety belt to the ideal position for your own body: Make sure you hear the lock engage in the belt buckle. To release 1. Press the red button in the belt buckle 2. Hold the belt 3. Guide the belt back into its reel. 1. Push the locking lever downward 2. Adjust the desired steering wheel position 3. Pull the lever back in. Press the button and at the same time push the entire unit upwards or downwards.
MIRRORS Manual adjustment The mirrors can also be adjusted manually: Press the edge of the lens. Electric heating* Both mirrors are heated automatically when the ignition key is in position 2. Adjusting exterior mirrors Interior rearview mirror 1 Switch for choosing between the left and right mirror 2 Switch for 4-way adjustment. To reduce glare from vehicles behind you when you are driving at night: Tilt the lever forward. Illuminated vanity mirror From ignition key position 1: 1.
AIRBAGS designed to help support the seat occupant's upper body. OVERVIEW MIRRORS 2 Head airbags on the driver and passenger sides for both rows of seats (front/rear) The mirror becomes clear again when you engage reverse gear or select selector lever position R. Do not apply adhesive materials to the cover panels of the airbags, cover Keep the photocells free and clean to them or modify them in any other way. Do ensure that the mirror functions perfectly.
AIRBAGS Do not make any changes yourself to the individual components and wiring. This includes the padded cover of the steering wheel, in the instrument panel and the roof supports, as well as the sides of the roofliner and the original backrest covers on the front seats. Do not attempt to remove or dismantle the steering wheel. In view of the applicable safety regulations, arrange for your MINI center to dispose of the airbag generators.
Adjust the tether strap according to the child restraint manufacturer’s instructions. Anchor fitting 1 is shown above. Anchor fitting 2 is shown in the next column.< Online Edition for Part No. 01 41 0 156 724 - © 01/02 BMW AG CONTROLS OPERATION REPAIRS DATA Depending on the location selected for seating in the rear passenger area, attach the tether strap to the corresponding anchorage point to secure the childrestraint system. Both seating positions are fitted with a head restraint.
TRANSPORTING CHILDREN SAFELY forward-facing child-restraint system that has first been properly secured with a safety belt. Never install a rearward-facing child-restraint system in the front passenger seat. We strongly urge you to carefully read and comply with the instructions for installation and use provided by the child restraint's manufacturer whenever you use such a device. Be sure that all occupants – of all ages – remain properly and securely restrained at all times.
The illustration is an example showing the mounts for the LATCH (Lower Anchors and Tethers for Children) child-restraint mounting system at the right rear. The system is also available at the left rear position. Always follow all manufacturer's instructions and observe all safety precautions when installing the LATCH child-restraint system.< CONTROLS OPERATION Open the cover.
IGNITION LOCK STARTING THE ENGINE Vehicles with Continuously Variable automatic Transmission (CVT): Do not move the selector lever from position "P" until the engine is running. Your vehicle is equipped with an interlock. Therefore, the ignition key cannot be turned to position 0 and removed until the selector lever is in position "P" (Interlock).
1. 2. 3. 4. Do not actuate the starter for too short a time. Do not turn it for more than approx. 20 seconds. Release the ignition key immediately when the engine starts. Extended starting attempts, characterized by excessively frequent or long periods with the starter engaged, can lead to damage in the catalytic converter.< If the engine does not start on the first attempt (the engine is very hot or cold, for instance): > Press the accelerator pedal halfway down while engaging the starter.
PARKING BRAKE If, in exceptional circumstances, it should be necessary to engage the parking brake while the vehicle is in motion, do not pull the lever with excessive pressure. Keep your thumb pressed against the release button while carefully pulling the lever up to apply moderate pressure. Excessive pressure can lead to overbraking and loss of traction (fishtailing) at the rear axle. The brake lamps do not come on when the The parking brake is designed primarily to parking brake is engaged.
5-speed transmission: Press the gearshift lever to the right and to the back. The manual gearshift lever neutral plane lies in the gear plane of the 3rd/4th gear. When shifting from each gear into "Neutral", the manual gearshift lever springs back automatically into the gearshift lever neutral plane. 6-speed transmission: Press the gearshift lever to the left to overcome the slight resistance and press forwards.
CONTINUOUSLY VARIABLE AUTOMATIC TRANSMISSION (CVT) * You can drive with a steplessly shifting CVT. In addition, you can also shift manually. While the vehicle is stationary and before shifting out of P or N, press the brake pedal in order to disengage the selector lever lock mechanism (Shiftlock). If the engine speed is too high when the vehicle is at a standstill, the selector lever is also blocked to protect the transmission. Hold the brake pedal down until starting off.
N Neutral D Drive (CVT driving position) This position is designed for driving under all normal operating conditions. "Kickdown" In "kickdown", you achieve maximum acceleration and maximum speed in position D. Press the accelerator pedal past the increased resistance point at the fullthrottle position. M/S + – Manual mode and Sport program Switch from D into M/S + –: Activates the Sport program and indicates SD in the gear indicator in the speedometer.
CONTINUOUSLY VARIABLE AUTOMATIC TRANSMISSION (CVT) * Do not work in the engine compartment when a drive gear (forward or reverse) is engaged. If you do this, the vehicle could move.< Jump-starting and towing, refer to pages 113, 115.< Available displays P R N D SD 1 2 3 4 5 6 EP Electronic transmission control module If there is a malfunction in the transmission system, EP appears in the display. All selector lever positions can still be selected.
SIGNAL/HEADLAMP FLASHER OVERVIEW PARKING LAMPS/LOW BEAMS You can also have this function activated.< Switching on the standing lamps "Lights on" warning Switching on the parking lamps Turn to the first position. The front, rear and side vehicle lighting is switched on. One-sided standing lamps, see next column. Switching on the low beams Turn to the second position. With the low beams on and with the ignition switched off, only the parking lamps will remain on.
INSTRUMENT LIGHTING FOG LAMPS INTERIOR LAMPS To control the instrument lighting, press the button. When the parking lamps/low beams are switched on: Switching the interior lamps on and off manually Briefly press the switch upwards or downwards. Press button 1. To increase the illumination intensity Keep the button pressed until the desired brightness is reached. Briefly press once again to switch off. Switching the reading lamps on and off Fog lamps* Press button 2.
The rain sensor is located on the windshield, directly in front of the interior rearview mirror. When the rain sensor is activated, the windshield wipers are automatically controlled depending on the amount of water (or snow) landing on the windshield. Do not remove the protective lens and avoid staring directly at the unfiltered beam for several hours, as inflammation of the iris could result.
WASHER/WIPER SYSTEM Cleaning windshield and headlamps* The system sprays washer fluid against the windshield. The wipers are automatically activated for a brief period. When the vehicle lighting is on, the headlamps are also cleaned at appropriate intervals. Do not use the washers if there is any danger that the fluid will freeze on the windshield. If you do so, your vision could be obscured. For this reason, use an Rear window wiper antifreeze agent, see page 89.
If you are already driving with active cruise control, the speed is decreased by approx. 1 mph (2 km/h) every time you briefly tap the button. The indicator lamp in the instrument cluster lights up. Cruise control is active. Press and hold button 4. To maintain and store speed or to accelerate Press button 3.
CRUISE CONTROL* To cancel the cruise control To continue cruise control When the system is activated, press button 2. Press button 1. The indicator lamp stays lit. You can use the cruise control again as required. The vehicle accelerates to and maintains the last speed stored. If you turn the ignition key to position 0, the stored speed is deleted and the system is deactivated.
TACHOMETER FUEL GAUGE 1 Trip odometer Do not operate the engine with the needle in the red overspeed zone of the gauge. In the speedometer You can activate the displays shown in the illustration with the ignition key in position 0 by pressing the button in the instrument cluster. When you switch on the ignition, the indicator lamp lights up briefly to confirm that the system is operational.
FUEL GAUGE TEMPERATURE GAUGE 1 Red indicator lamp When you switch on the ignition, warning lamp 1 comes on briefly to confirm that the system is operational. If the lamp comes on while operating the vehicle, the engine has overheated. Switch off the engine immediately and allow it to cool down. Navigation system option In the navigation system Please also comply with the instructions in the previous column.< Once indicator lamp 1 switches from orange to red, there are still approx. 2.
OVERVIEW SERVICE INTERVAL DISPLAY The displays shown in the illustration appear for a few seconds when the ignition key is in position 1 or after the engine is started. You can obtain a display of the number of days remaining until the next due brake fluid change, see page 92. The next service due appears in miles (kilometers) with the message INSPECTION or/ and OILSERVICE, together with the distance remaining before the next scheduled service.
CLOCK COMPUTER* The displays appear in the following order: Outside temperature, cruising range, average fuel consumption, average vehicle speed. Starting with ignition key position 1, the last active setting is displayed. If the vehicle is equipped with a navigation system, see chapter covering the computer in the navigation system Owner's Manual.
OVERVIEW COMPUTER* Average speed – Average fuel consumption The average speed value/consumption value on display is recalculated. OPERATION Any time spent when the vehicle is stationary and the engine is switched off is ignored for the calculation. CONTROLS Press the button in the turn signal indicator lever for a longer period. Outside temperature REPAIRS If the vehicle is equipped with a tachometer, but not with a computer, the temperature is always displayed.
AUTOMATIC STABILITY CONTROL PLUS TRACTION (ASC+T) * The concept Indicator lamp This system optimizes vehicle stability and traction, especially when just starting off, when accelerating or when cornering. ASC+T recognizes the danger present in traction loss and will increase driving stability and traction by reducing the engine's output, and if necessary, by applying the brakes to the front wheels. ASC+T is operational each time you start the engine.
To switch off the DSC Briefly press the switch. The DSC is operational every time you start The indicator lamp stays lit. the engine. DSC contains the functions Antilock Brake System ABS/Electronic Brake When driving with snow chains, it may be effective to switch off the DSC for a brief Force Distribution EBV/ASC+T. period. The laws of physics cannot be To maintain stability, always drive repealed, even with DSC. An approwith the DSC switched on whenever priate driving style always remains the possible.
FLAT TIRE MONITOR The concept Flat tire The tire inflation pressure is determined The indicator lamp in the instrufrom the signals of the ABS sensors. ment cluster informs you by The system provides an alert whenever the flashing when the tire inflation tire inflation pressure drops below the pressure of a tire drops in relation to any pressure in any other tire. other tire. In addition, an acoustic signal is sounded.
> When driving on roads covered with snow or on other slippery road surfaces > A sporty driving style (slip at the driven wheels, high lateral accelerations).< The system starts to operate automatically about one second after you select reverse with the ignition key in position 2. PDC is deactivated when you shift back out of reverse. Acoustical signals The distance to the nearest object is indicated by a tone sounding at various intervals.
AIR CONDITIONER SYSTEM 64 1 Air onto the windshield and onto the side windows 4 Temperature 65 5 Windshield heating 65 9 Recirculated-air mode 65 2 Air for the upper body area 66 6 Blower for air supply 65 10 Rear window defroster 65 3 Air for the front and rear footwells 7 Air conditioner 65 8 Air distribution Online Edition for Part No.
Air distribution in upper body region , upper body region and footwell , footwell , footwell and windows and windows . All intermediate positions are possible, see illustration and overview on page 64. Indicator lamp goes out. The heating continues to run with reduced power output and then switches itself off automatically. Condensation forms in the air conditioner system during operation, and then exits under the vehicle. Traces of condensed water under the vehicle are therefore normal.
AIR CONDITIONER SYSTEM Microfilter The microfilter removes dust and pollen from the incoming air. Your MINI center will replace it during routine maintenance. A substantial reduction in the air supply indicates that the filter must be replaced before scheduled maintenance. Draft-free ventilation Air supply for the upper body area: Button 1: open and close the vent outlets as required by turning. The points indicate the position in each case. Vent 2: change the direction of the airflow by swiveling.
REPAIRS OPERATION CONTROLS OVERVIEW AUTOMATIC CLIMATE CONTROL* 1 Air onto the windshield and onto the side windows 5 Interior temperature sensor – please keep clear and unobstructed 2 Air for the upper body area, see page 69 6 Recirculated-air mode 68 11 Display for temperature and air supply 68 3 Air for the front and rear footwells 7 Air conditioner 68 12 Blower for air supply 69 4 Rear window and windshield heating 68 8 Automatic air distribution and supply 68 13 Defrosting and demisting t
AUTOMATIC CLIMATE CONTROL* Automatic air distribution and supply Automatic program (AUTO): Indicator lamp lights up. Automatic adjustment of the air distribution and the air supply and adaptation of the specified temperatures to external influences (outside temperature and sunlight). In the automatic program (AUTO), the air conditioner is activated automatically. Switching the automatic climate control on/off The blower, heating and air conditioner are switched off.
Defrosting and demisting the windshield and side windows Press the button briefly. The indicator lamp flashes. Ice and condensation are removed from the rear window/windshield and side windows. Draft-free ventilation The rear window defroster/windshield heating is switched on automatically. It can Air supply for the upper body area: be switched off again separately. Button 1: open and close the vent outlets Press the button for a longer period. as required by turning. Only air to the windshield.
GLOVE COMPARTMENT ASHTRAY/BEVERAGE HOLDER CIGARETTE LIGHTER To open: Ashtray From ignition key position 1: Pull the handle. The light goes on. The ashtray is located in one of the beverage holders in the center console. Press the cigarette lighter in. To close: In the rear, an ashtray can also be fitted in the beverage holder at the end of the center console. Fold the door up. To prevent injury in the event of an accident, close the glove compartment immediately after use.
FOLDABLE REAR BACKREST OVERVIEW LUGGAGE COMPARTMENT COVER When the tailgate is opened, the luggage compartment cover is also raised. 1. Pull lever 2. Fold the rear backrest forwards. 1. Remove the retaining straps on the When folding the backrest back into tailgate its original position always ensure 2. Pull the luggage compartment cover out that the detent engages securely. A loose towards the rear.
LOADING CARGO Stowing cargo > For very heavy loads when the rear seat Securing the load is not occupied, secure each safety belt in > For small, light items, secure using the > Load heavy cargo as far forward as the opposite buckle. This provides addipossible – directly behind the backrests – luggage compartment net* or elastic tional stabilization for the rear backrests.
When loading a roof-mounted luggage rack, ensure that there is sufficient space for the movement of the sliding/tilt sunroof and that no objects protrude into the swiveling area of the tailgate, as otherwise damage can occur.< Do not secure the roof-mounted luggage rack to the trim panels/ strips: the lack of a secure hold could lead to damage or accidents.< INDEX DATA REPAIRS Special roof-mounted luggage racks for your MINI are available as accessories from your MINI center.
74 Online Edition for Part No.
OWNER SERVICE PROCEDURES TECHNICAL DATA INDEX Operation Online Edition for Part No.
BREAK-IN PROCEDURES To ensure that your vehicle provides maximum economy throughout a long service life, we request that you comply with the following information: Engine Up to 1,200 miles (2,000 km): Attempt to constantly vary both vehicle and engine speed during these initial miles while remembering to avoid engine speeds in excess of 4,500 rpm and/or vehicle speeds of over 95 mph (150 km/h). Absolutely avoid using the full-throttle or kickdown position for the accelerator.
Always observe all safety precautions posted at the service station when handling fuel.< Clothes hooks > results in premature pump shutoff > and will reduce the effect of the fuel vapor recovery system on the pump. High temperatures occur in any vehicle equipped with a catalytic converter. Do not remove the heat protection plates fitted in the area of the exhaust system and do not apply body-cavity protectant to this area.
FUEL SPECIFICATIONS ANTILOCK BRAKE SYSTEM (ABS) The engine uses lead-free gasoline only. The concept Required fuel: The ABS keeps the wheels from locking while braking, thereby enhancing active driving safety. > Premium Unleaded Gasoline, min. 91 AKI. AKI = Anti Knock Index. Do not use leaded fuels. The use of leaded fuels will cause permanent damage to the emissions-control system's oxygen sensor and the catalytic converter.< ABS also includes Electronic Brake Force Distribution (EBV).
Disc brakes When the vehicle is driven only occasionally, during extended periods when the vehicle is not used at all, and in operating conditions where brake applications are less frequent, there is an increased tendency for corrosion of the brake rotors and accumulation of contamination on the brake pads. This occurs because the minimal pressure that must be exerted by the pads to clean the rotors by brake applications is not reached.
TIRE INFLATION PRESSURE Information for your safety The factory-approved radial tires are matched to the vehicle and have been selected to provide optimum safety and driving comfort if used properly. It is not merely the tire's service life, but also driving comfort and – above all else – driving safety that depend on the condition of the tires and the maintenance of the specified tire pressure. Incorrect inflation pressure is a frequent cause of tire damage.
MINI COOPER MINI COOPER S 175/65 R 15 2.1 (210/30) 2.1 (210/30) 2.4 (240/35) 2.4 (240/35) 195/55 R 16 205/45 R 17 2.1 (210/30) 2.1 (210/30) 2.4 (240/35 175/60 R 16 All winter tires 2.3 (230/33) 2.3 (230/33) 2.6 (260/38) 2.6 (260/38) 2.4 (240/35 Space-saver spare tire 4.2 (420/61) 4.2 (420/61) 4.2 (420/61) 4.2 (420/61) 195/55 R 16 2.1 (210/30) 2.1 (210/30) 2.4 (240/35) 2.4 (240/35) 205/45 R 17 195/55 R 16 M+S 205/45 R 17 M+S 2.3 (230/33) 2.3 (230/33) 2.6 (260/38) 2.
TIRE CONDITION The tread depth should not fall below 0.12 in (3 mm), although e. g. European legislation only prescribes a minimum tread depth of 0.063 in (1.6 mm). Below 0.12 in (3 mm) tread pattern depth, there is an increased risk of hydroplaning, even at relatively moderate speeds and with only small amounts of water on the road.
Tread wear Traction AA A B C Temperature A B C All passenger car tires must conform to Federal Safety Requirements in addition to these grades.< Tread wear The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear controlled conditions on a specified indoor one and one-half (1 g) times as well on the laboratory test wheel. government course as a tire graded 100.
TIRE REPLACEMENT WHEEL AND TIRE COMBINATIONS Tire age The right choice The date on which the tire was manufactured is indicated by the code on the sidewall: The factory-approved normal tires and safety tires are matched to the vehicle and have been selected to provide optimum driving safety and the desired driving DOT ... 1202 indicates that the tire was manufactured in Week 12 of the year 2002. comfort.
The use of narrow-link snow chains is permitted in pairs only and only on the front wheels with the following tires: 175/65 R 15 175/60 R 16 When fitting, comply with the manufacturer's instructions.< OVERVIEW Never exceed the maximum speed for which the tires are rated. Unprofessional attempts by laymen to service tires can lead to damage and accidents. Have this work performed by skilled professionals only.
HOOD Do not attempt to service your vehicle if you do not have the required technical background. Before working in the engine compartment, switch off the engine and allow it to cool down. Before working on the electrical system, always disconnect the battery first. For all work on the vehicle, comply with the appropriate information and instructions.
3 Engine oil filler neck 90 4 Battery 111 6 Reservoir for headlamp cleaning system 89 2 Coolant expansion tank 91 5 Brake fluid reservoir 92 7 Engine oil dipstick 89 INDEX 1 Reservoir for windshield washer system 89 DATA REPAIRS OPERATION CONTROLS OVERVIEW ENGINE COMPARTMENT – MINI COOPER Online Edition for Part No.
ENGINE COMPARTMENT – MINI COOPER S 1 Reservoir for windshield washer system 89 2 Coolant expansion tank 91 3 Engine oil filler neck 90 4 Auxiliary terminal for jumpstarting 113 6 Reservoir for headlamp cleaning system 89 7 Engine oil dipstick 89 5 Brake fluid reservoir 92 88 Online Edition for Part No.
Headlamp* and windshield washer system Measuring the oil level 1. Park the vehicle on a level surface 2. Switch off the warmed-up engine 3. Pull the dipstick out after approx. 5 minutes and wipe it off with a lint-free Fill with water and – if required – with anticloth, paper towel, or similar material freeze (according to manufacturer's recom4. Carefully push the dipstick all the way mendations). into the guide tube and pull it out again.
ENGINE OIL Continuous exposure to used oil has caused cancer in laboratory testing. For this reason, any skin areas that come into contact with oil should be thoroughly washed with soap and water. Always store oil, grease, etc., out of reach of children. Comply with all warning labels and information on lubricant containers.< Adding engine oil Only top up oil when the oil level has dropped to just above the lower notch of the dipstick, but before it goes below this mark.
MINI COOPER S: The illustration shows an example of the coolant tank on the MINI COOPER. Checking coolant level Correct coolant level for cold engine (approx. 68 7/20 6): The coolant consists of water and extended-duty antifreeze with corrosion inhibitor. The mixing ratio of 50 to 50 must be maintained all the year round due to the required corrosion resistance. No other additives are required. Replace the coolant every 4 years.
BRAKE FLUID Brake fluid loss may result in extended brake pedal travel. If this occurs, refer to the information on page 79. Brake fluid is hygroscopic, that is, it absorbs moisture from the air over time. In order to ensure the brake system's safety and reliability, have the brake fluid changed every two years by a MINI center, see also page 57 and the Service and Warranty Information Booklet (US models)/ Warning lamp Warranty and Service Guide Booklet (CanaIf the brake warning lamp comes dian models).
Determining the maintenance intervals according to the actual use of the vehicle covers every kind of operating situation. People who drive very little – much less than 6.000 miles (10.000 km) per year – should have the engine oil changed at least every 2 years since oil deteriorates over time, regardless of use. For more information on the Service Interval Display, see page 57.
CARING FOR YOUR VEHICLE Suitable car-care products Use the cleaning and car-care products available at your MINI center.< Washing your vehicle You can wash your new MINI from the outset in automatic car washes, though you should use brushless car washes. When using steam jets or high-pressure washers, ensure that you keep the jets sufficiently far away from the vehicle. If the jet is too close or the pressure is too high, this can lead to damage or initial damage that can develop into more serious damage.
Regular cleaning and care are necessary, as dust and road dirt scratches in pores and creases and lead to heavy wear as well as premature brittleness of the leather surface. This is why you should use a cloth or vacuum cleaner to remove dust from the leather on a regular basis. CONTROLS DATA As dirt and grease can slowly affect the protective layer of the leather, the cleaned leather surfaces must be treated with leather care agent. This also helps to avoid electrostatic charges.
VEHICLE IMMOBILIZATION OBD INTERFACE SOCKET TECHNICAL MODIFICATIONS Your MINI center will be glad to advise you on what is important if the vehicle is to be decommissioned for longer than three months. Any MINI center will be glad to inform you of the advisability, legal regulations and factory recommendations for technical modifications to the vehicle. To do so, they require the vehicle identification number from your vehicle documents.
OVERVIEW CALIFORNIA PROPOSITION 65 WARNING California laws require us to state the following warning: INDEX DATA REPAIRS OPERATION CONTROLS Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.< Online Edition for Part No.
98 Online Edition for Part No.
OWNER SERVICE PROCEDURES TECHNICAL DATA INDEX Repairs Online Edition for Part No.
ONBOARD TOOL KIT WINDSHIELD WIPER BLADES Storage location Windshield wiper The illustration shows an example of the tire change set. Rear window wiper 1. Rotate the wiper arm completely out from the windshield 2. Set the wiper blade at an angle Depending on the level of equipment, your 3. Press the securing spring (arrow) MINI is fitted with a special onboard tool 4. Unhook the wiper blade towards the kit stored at the following locations: windshield Tire change set for space-saver spare tire: 5.
Replacement bulbs are available from your MINI center. 1 Low beams Xenon lamps* The service life of these bulbs is very long and the probability of a failure is very low, provided that they are not switched on and Whenever working on the electrical 2 High beams off an unusual number of times.
LAMPS AND BULBS Turn signal indicators, front Side turn signal indicators Fog lamps* 21 Watt bulb 5 Watt bulb H7 bulb, 55 Watts 1. Open the hood 2. Reach into the opening for the turn signal indicators from above 3. Apply gentle pressure to the bulb holder while turning it to the left 4. Remove and replace the bulb. 1. Press the bulb towards the rear of the vehicle and remove 2. Remove and replace the bulb. Please contact a MINI center in case of a malfunction.
Rear fog lamp (not active) Turn signal indicator Rear lamp Rear lamp/brake lamp red yellow red red To reach the bulb holder, remove the cover of the side trim panel in the luggage compartment. Access to the lamp via the rear or underside of the bumper. 1. Press the clips together 2. Push the lamp out of the bumper 3. Apply gentle pressure to the bulb while turning it to the left 4. Remove and replace the bulb. REPAIRS 1 2 3 4 Backup lamp Replacing bulbs 1. Unplug the power supply 2.
LAMPS AND BULBS Center (high-mount) brake lamp License plate lamps Interior lamps LED strip on the tailgate. 5 Watt bulb Interior lamp (6 Watt xenon bulb) Please contact a MINI center in case of a malfunction. 1. Apply a screwdriver to the recess and lever out the lamp cover 2. Replace the bulb. 1. Press out the lamp cover with a screwdriver 2. Remove and replace the bulb. Reading lamps (2 x 6 Watt xenon bulbs) 1. Press out the lamp cover with a screwdriver 2.
Glove compartment lamp 5 Watt bulb 1. Press out the lamp cover with a screwdriver 2. Remove and replace the bulb. Luggage compartment lamps Lamps in the vanity mirror in the sun visor. 5 Watt bulb Please contact a MINI center in case of a malfunction. 1. Press the lamp cover with a screwdriver to the left and press out 2. Remove and replace the bulb. INDEX DATA Illuminated vanity mirror CONTROLS 1. Press out the lamp cover with a screwdriver 2. Remove and replace the bulb.
REPAIRING A FLAT TIRE CHANGING TIRES – MINI WITH SPACE-SAVER SPARE TIRE * Safety measures in the event of a flat tire: Stop the vehicle as far as possible from passing traffic. Switch on the hazard warning flashers. Turn the steering wheel to the straightahead wheel position and engage the steering lock. Engage the parking brake and shift into 1st or reverse gear (selector lever in P).
The screw connection of the space-saver spare tire is in the luggage compartment under the floor mat, on the base of the storage compartment for the tire change set. 3. Screw the lifting handle from the onboard tool kit onto the thread 4. Raise the lifting handle slightly 5. Squeeze the securing springs 6. The space-saver spare tire is released and must be held by the lifting handle 7. Lower the space-saver spare tire with the lifting handle 8. Unscrew the lifting handle again INDEX DATA 1.
CHANGING TIRES – MINI WITH SPACE-SAVER SPARE TIRE * Preparing the vehicle Read and comply with the safety precautions provided on page 106.< 9. 10. 11. 12. 108 1. Secure the vehicle to prevent it from rolling: Place the folding chock behind the front wheel on the other side of the vehicle; on downward inclines, place it in front of this wheel.
Tightening the lug bolts Tighten the lug bolts in a diagonal pattern. As soon as possible, have the secure seating of the lug bolts (tightening torque 72 ftlb (100 Nm)) checked using a calibrated torque wrench. Otherwise, a wheel that might come loose can lead to a severe accident.< Only one space-saver spare tire may be mounted at one time. Reinstall wheels and tires of the same size and specification as soon as possible. Maintain prescribed tire pressures, see page 80.
FLAT TIRE – SAFETY (RUN-FLAT) TIRES* Flat tire The yellow indicator lamp in the instrument cluster lights up to indicate a flat tire. In addition, a gong sounds, see pages 17, 62. You will recognize safety tires by a circular symbol containing the letters RSC on the side of the tire. Safety tires consist of self-contained tires and special rims. The tire reinforcement ensures that the tire retains some residual safety in the event of pressure drop and driving remains possible to a restricted degree.
The battery is located in the luggage compartment under the floor mat. For all questions regarding the battery, please consult your MINI center. < Charging the battery Only charge the battery in the vehicle via the terminals in the engine compartment with the engine switched off, see "Jumpstarting" on page 113. Whenever working on the electrical system, disconnect the cable from the negative terminal of the battery. Failure to do this could result in fire hazards or injury due to short circuits.
FUSES If an electrical device fails, switch it off and In the interior check the fuse. On the left side of the footwell in the side trim panel. Plastic tweezers that you can use to pull fuses out of their sockets can be found in Open the cover panel of the fuse box. To do the fuse box of the interior, see next so, press the fastener. column. Do not attempt to repair a blown fuse In the engine compartment or replace it with a fuse of a different color or amperage rating.
INDEX Do not touch live wiring and cables on a running engine. There is a risk of The warning triangle is located beneath the The first-aid kit is located together with the fatal injury if you do this. Carefully observe luggage compartment cover. onboard tool kit in the left of the luggage the following instructions to avoid personal compartment, behind the side trim panel. injury and/or damage to either vehicle or Comply with legal requirements both vehicles.
JUMP-STARTING 114 Preparation for jump-starting Performing the jump-start 1. Check whether the battery of the support vehicle has 12 Volts and approximately the same capacity (Ah) (printed on the battery) 2. Switch off the engine of the support vehicle 3. Switch off any electrical systems and components in both vehicles – except for the hazard warning flashers of the support vehicle. > Do not disconnect the discharged 1.
Do not tow a vehicle that is heavier than the towing vehicle, otherwise it Screw the tow fitting in until it bottoms firmly. If this is not done, the will no longer be possible to control vehicle response.< threads could be damaged.
TOW-STARTING AND TOWING Tow-starting Towing Only tow vehicles with Continuously On vehicles with Continuously VariVariable automatic Transmission able automatic Transmission (CVT), it is not permitted to start the engine by tow- (CVT) with the front wheels raised or on a special transport vehicle, otherwise the starting. The transmission could be transmission can be damaged.< damaged. For jump-starting, see page 113.
OVERVIEW CONTROLS OPERATION REPAIRS DATA INDEX Online Edition for Part No.
118 Online Edition for Part No.
OWNER SERVICE PROCEDURES TECHNICAL DATA INDEX Data Online Edition for Part No.
ENGINE DATA MINI COOPER MINI COOPER S 97.52/1,598 4 97.52/1,598 4 kW/bhp rpm 85/115 6,000 120/163 6,000 Maximum torque at engine speed lb ft/Nm rpm 110/149 4,500 155/210 4,000 Compression ratio e Stroke Bore in/mm in/mm Displacement Number of cylinders cu in/cmm Maximum output at engine speed Fuel-injection system 120 10.6 8.3 3.38/85.8 3.03/77 3.38/85.8 3.03/77 Digital electronic engine-management system Online Edition for Part No.
All dimensions specified in inches (millimeters). Smallest turning circle 35 ft (10.66 m). Online Edition for Part No.
WEIGHTS Curb weight, ready for operation, with 165 lbs./75 kg load, 90% full tank, options not included with manual transmission lbs./kg with Continuously Variable automatic Transmission (CVT) lbs./kg MINI COOPER MINI COOPER S 2,480/1,125 2,535/1,150 2,678/1,215 – 3,263/1,480 3,318/1,505 3,461/1,570 – Approved gross vehicle weight with manual transmission lbs./kg with Continuously Variable automatic Transmission (CVT) lbs./kg 122 Approved front axle load lbs.
Fuel quality, see page 78 Windshield washer/ headlamp cleaning system quarts/liters approx. 2.6/2.5 quarts/liters approx. 2.6/2.5 More details, see page 89 Cooling system including heater circuit quarts/liters 5.6/5.3 MINI COOPER 6.3/6.0 MINI COOPER S More details, see page 91 Engine oil and filter change quarts/liters 4.7/4.5 MINI COOPER 4.7/4.5 MINI COOPER S Longlife Oil More details, see page 89 Manual transmission, incl. differential quarts/liters approx. 2.1/2 MINI COOPER approx. 1.8/1.
ELECTRICAL SYSTEM Battery 12V, 55 Ah Original MINI parts and accessories as well as qualified advice is available at your MINI center.< Spark plugs NGK BKR 6 EQUP 124 Online Edition for Part No.
OVERVIEW CONTROLS OPERATION REPAIRS DATA INDEX Online Edition for Part No.
126 Online Edition for Part No.
OWNER SERVICE PROCEDURES TECHNICAL DATA INDEX Index Online Edition for Part No.
Hilfsrahmen für Querverweise EVERYTHING FROM A TO Z A ABS (Antilock Brake System) 16, 17, 78 Activated-charcoal filter 69 Adjusting backrest 33 seats 31 steering wheel 35 thigh support 33 Air conditioner operation 65 automatic climate control 68 Air conditioner system 64 Air distribution air conditioner system 65 automatic climate control 68, 69 Air pressure 80 Air recirculation 65, 68 Air supply air conditioner system 65 automatic climate control 69 Air vents 66, 69 Air, dry 65, 68 Airbags 16, 31, 37 All-
CONTROLS OPERATION Control elements 12 Convenience feature sliding/tilt sunroof 25 windows 25 Convenience operation via central locking system 26 Coolant 91 Coolant level 91 Coolant temperature gauge 56 Cooling 65, 68 Copyright notice 6 Correct sitting posture with airbags 31 safety belt 31 Cruise control 17, 18, 53 Cruising range 59 Cup holder, see Beverage holder 70 Curb weight 122 Currency of the Owner's Manual 7 Cylinders 120 REPAIRS Computer 58 average fuel consumption 59 average speed 59 cruising r
EVERYTHING FROM A TO Z D Dashboard 12 Data dimensions 121 engine 120 weights 122 Data, technical 120 Daytime driving lamps 49 Decommissioning the vehicle 96 Deep water, see Water on roadways 77 Defrosting position 66 Defrosting windows 69 air conditioner system 66 automatic climate control 69 Dimensions 121 Dirt on the paintwork 94 Disc brakes 79 Displacement 120 Display elements 13, 14 coolant temperature gauge 56 fuel gauge 55 indicator and warning lamps 15 odometer 55 Service Interval Display 57 with nav
I Handbrake 44 Hazard warning flashers 12 Head airbags 37 Head restraints 34 Headlamp cleaning system 52, 89 filling 89 Headlamp flasher 49 Headlamps care 94, 101 cleaning 52 Ignition lock 42 Illuminated vanity mirror 36 Imitation leather 95 Imprint 6 Indicator lamps 15 Individual air distribution 69 INSPECTION 57 Instrument cluster, see Display elements 13 Instrument lighting 50 Instrument panel 12 Interface socket for Onboard Diagnostics 96 Jack 100, 106 Jump-starting 113, 114 K Keys 22 multifunction
EVERYTHING FROM A TO Z Luggage compartment cover 71 Luggage compartment lamp bulb replacement 105 Luggage rack see Roof-mounted luggage rack 73 Lumbar support 32 M M+S tires 85 Maintenance 57, 93 Maintenance System 93 Manual operation driver's door 25 sliding/tilt sunroof 30 tailgate 27 Manual transmission 45 Manufacturer 6 Master key 22 initialization 22 MD player, see separate Owner's Manual Mechanical key 22 MFL (Multifunction steering wheel) 18 Microfilter 66, 69 Mini Disc player, see separate Owner's
T Tachometer 55 Tail lamps bulb replacement 103 Tailgate 16, 27 manual unlocking 27 Tank capacity 77 Tank content, filling capacities 123 CONTROLS OPERATION Technical data 120 Technical modifications 96 Temperature automatic climate control 68 heating and climate control 65 tires 83 Temperature display 59 engine coolant 56 Temperature layering 66, 69 Temperatures, high 77 The right tires 84 Third brake lamp bulb replacement 104 Tire change tire change set 106 Tire changes between axles 84 Tire failure 16
EVERYTHING FROM A TO Z inflation pressure 80 M+S tires 85 replacement 83 safety tires 80, 84, 85, 110 snow chains 85 storage 84 temperature 83 the right choice 84 tread 82 winter tires 85 with emergency running properties, see Safety tires 80, 84, 85, 110 Tools 100 Torque 120 Tow bar 115 Tow fitting 115 Tow socket for tow fittings 115 Towing 115 with bar 115 with Continuously Variable automatic Transmission (CVT) 116 Towing eyelets 115 134 Tow-starting 115, 116 with Continuously Variable automatic Transmi
OVERVIEW EVERYTHING FROM A TO Z X INDEX DATA REPAIRS OPERATION CONTROLS Xenon lamps 101 Online Edition for Part No.
REFUELING Fuel Designation AKI: Engine oil Quality The oil volume between the two marks on the dipstick corresponds to approx. 1.1 US quarts (1 liter). Tire inflation pressure Summer front 2 persons rear Winter front rear To ensure that you always have convenient access to all essential information when you stop for fuel, we recommend that you take the time to fill out the adjoining chart by entering the data that applies to your vehicle. 4 persons plus luggage Online Edition for Part No.
01 41 0 156 724 ue DRIVE ME. Online Edition for Part No.
MINI US-En Online Edition for Part No.
