Owner's Manual. MINI Coupe. MINI Roadster. MINI Convertible. Online Edition for Part no.
COOPER COOPER S JOHN COOPER WORKS Owner's Manual for Vehicle Thank you for choosing a MINI. The more familiar you are with your vehicle, the better control you will have on the road. We therefore strongly suggest: Read this Owner's Manual before starting off in your new MINI. It contains important information on vehicle operation that will help you make full use of the technical features available in your MINI.
© 2012 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. US English II/13, 03 13 500 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling. Online Edition for Part no.
Contents The fastest way to find information on a partic‐ ular topic or item is by using the index, refer to page 280.
Notes Notes Using this Owner's Manual The fastest way to find information on a partic‐ ular topic is by using the index. An initial overview of the vehicle is provided in the first chapter. Additional sources of information Should you have any questions, your service center will be glad to advise you at any time. Information on MINI, e.g., on technology, is available on the Internet: www.mini.
Notes For your own safety Maintenance and repairs Advanced technology, e.g., the use of modern materials and high-performance electronics, requires suitable maintenance and repair methods. Therefore, have this work performed only by a MINI service center or a workshop that works according to MINI repair procedures with ap‐ propriately trained personnel. If this work is not carried out properly, there is the danger of subsequent damage and related safety hazards.
Notes Detailed information about these warranties is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models. the state of a component, a module, a system or the environment.
Notes Reporting safety defects For US customers The following only applies to vehicles owned and operated in the US. If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration NHTSA, in addition to notifying BMW of North America, LLC, P.O. Box 1227, Westwood, New Jersey 07675-1227, Telephone 1-800-831-1117.
Online Edition for Part no.
At a glance Controls Driving tips Navigation Entertainment Communication Mobility Reference Online Edition for Part no.
At a glance Cockpit Cockpit Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
At a glance Cockpit Activate/deactivate the voice acti‐ vation system 24 Instrument lighting 88 Microphone on the steering col‐ umn Trip odometer 74 Change the radio station 5 Windshield wipers 67 Select a music track Scroll through the redial list 6 Start/stop the engine and switch the ignition on/off 64 9 Horn, the entire surface 7 Ignition lock 64 10 Adjust the steering wheel 58 8 Steering wheel buttons, right 11 Releasing the hood 237 Resuming cruise control 106 Storing the speed and
At a glance Cockpit Displays 1 2 Tachometer 75 ▷ Odometer and trip odometer 74 with indicator and warning lamps 15 ▷ Flat Tire Monitor 93 Display for ▷ Tire Pressure Monitor 93 ▷ Current speed 74 ▷ Settings and information 77 ▷ Indicator/warning lamps 15 ▷ Personal Profile settings 31 3 Resetting the trip odometer 74 5 Instrument lighting 88 4 Display for 6 Speedometer with indicator and warning lamps 15 ▷ Computer 75 7 Control Display 18 ▷ Service requirements 81 8 Fuel gauge 75
Cockpit Indicator/warning lamps The concept At a glance Indicator lamps without text messages The following indicator lamps notify you that certain functions are active: Symbol Function or system Turn signal, refer to page 67 High beams/headlamp flasher, refer to page 67 The indicator and warning lamps can light up in a variety of combinations and colors in display area 1 or 2.
At a glance Cockpit All around the center console 1 Hazard warning system 2 Speedometer with Control Display 14 3 Radio 160 Rear fog lamp 88 MINI Convertible: central power window switch 42 CD/multimedia 160 4 Air conditioning, automatic climate con‐ trol 108 5 Buttons on the center console Seat heating 55 Front fog lamps 87 Central locking, inside 35 Power windows 41 16 Online Edition for Part no.
At a glance Cockpit All around the head‐ liner All around the shift/ selector lever 1 1 USB audio interface 172 2 Buttons in the center console 2 Indicator/warning lamps for the front pas‐ senger airbags 92 Switch panel Sport button 103 Reading lamps 88 Driving stability control sys‐ tems 101 MINI Roadster: interior lamps/ reading lamps 88 Ambient lighting color 89 3 MINI joystick with buttons 18 MINI Coupe, MINI Roadster: ex‐ tending and retracting the spoiler manually 103 MINI Convertible:
At a glance Onboard monitor Onboard monitor Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. The buttons can be used to open the me‐ nus directly.
Onboard monitor At a glance MINI joystick with buttons Select menu items and create settings. 1. Turn, arrow 1. To hide the message: press the MINI joystick. The main menu is displayed. The message is automatically hidden after ap‐ prox. 10 seconds. 2. Press, arrow 2. 3. Move in four directions. Opening the main menu Press the button. Buttons on the MINI joystick Press the button Function Opens the main menu. The main menu is displayed.
At a glance Onboard monitor Selecting menu items Menu items shown in white can be selected. 1. Turn the MINI joystick until the desired menu item is highlighted. Arrows pointing to the left or right indicate that additional panels can be opened. View of an opened menu 2. Press the MINI joystick. A new menu is displayed or the function is per‐ formed. With the button on the MINI joystick: When a menu is opened, it generally opens with the panel that was last selected in that menu.
Onboard monitor Changing settings 1. Select a field. 2. Turn the MINI joystick until the desired set‐ ting is displayed. At a glance Example: setting the clock Setting the clock 1. Press the button. The main menu is displayed. 2. Turn the MINI joystick until "Settings" is highlighted and press the MINI joystick. 3. Press the MINI joystick to confirm the set‐ ting. Activating/deactivating the functions Several menu items are preceded by a check‐ box.
At a glance Onboard monitor ▷ Time. Symbol ▷ Current entertainment source. USB audio interface. ▷ Sound output, on/off. Music interface for smartphones. ▷ Wireless network reception strength. ▷ Telephone status. ▷ Traffic bulletin reception. Check Control messages and entries using the voice activation system temporarily hide the status information. Status field symbols Meaning Additional symbols Symbol Meaning Spoken instructions are switched off.
Onboard monitor Symbol At a glance Function Enter the letters. Enter the numbers. Switching between upper and lower case letters Depending on the menu, you can switch be‐ tween entering uppercase and lowercase let‐ ters. Symbol Function Move the MINI joystick forward: switch from upper to lower case letters. Move the MINI joystick forward: switch from lower to upper case letters.
At a glance Voice activation system Voice activation system Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Using voice activation Activating the voice activation system 1.
At a glance Voice activation system The functions of the main menu have short commands. Some list items, such as the phone book en‐ tries, can also be selected via the voice activa‐ tion system. Say the list items exactly as they are displayed on the list. Example: playing back a CD Via the main menu Having possible commands read aloud The commands of the menu items are spoken out loud, in the same way as they are selected via the MINI joystick.
At a glance Voice activation system On the Control Display: ▷ Always say commands in the language of the voice activation system. 1. "Settings" ▷ Keep the doors and windows closed to pre‐ vent noise interference. 2. "Language/Units" 3. "Speech mode:" ▷ Avoid making other noise in the vehicle while speaking. 4. Select the setting. Adjusting the volume Turn the volume knob while giving an instruc‐ tion until the desired volume is set.
Voice activation system Online Edition for Part no.
Online Edition for Part no.
At a glance Controls Driving tips Navigation Entertainment Communication Mobility Reference Online Edition for Part no.
Controls Opening and closing Opening and closing Vehicle equipment mote control is used to unlock the vehicle, Per‐ sonal Profile, refer to page 31. This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Opening and closing Personal Profile The concept You can set several of your vehicle's functions to suit your personal needs and preferences. ▷ Through Personal Profile, most of these set‐ tings are stored for the remote control cur‐ rently in use. ▷ While the vehicle is being unlocked, the re‐ mote control is recognized and the settings stored with it are called up and imple‐ mented.
Controls Opening and closing impossible to unlock the doors using the lock buttons or door handles. ▷ The welcome lamps, interior lamps, and ambient lighting are switched on and off. The setting is stored for the remote control cur‐ rently in use. 1. "Settings" ▷ The alarm system is armed or disarmed, re‐ fer to page 39. Operating from the inside Via the button for the central locking system, refer to page 35. In an accident of the necessary severity, the central locking system unlocks automatically.
Opening and closing Controls To open the convertible top and the rear win‐ dows in the MINI Convertible: release the but‐ ton and then press and hold it again until the convertible top is fully open. The side windows remain open. Setting the confirmation signals MINI Convertible with Comfort Access: 2. "Door locks" Have unlocking or locking of the vehicle con‐ firmed. 1. "Settings" 3. "Flash when lock/unlock" Hold the button down.
Controls Opening and closing For US owners only Locking from the outside The transmitter and receiver units comply with part 15 of the FCC/Federal Communication Commission regulations. Operation is governed by the following: Do not lock the vehicle from the outside if there are people in it, as the vehicle cannot be unlocked from inside without special knowl‐ edge.
Opening and closing Controls Manual operation Automatic locking If an electrical malfunction occurs, the driver's door can be unlocked or locked by turning the integrated key to the end positions of the door lock. In addition, it is possible to set the situations in which the vehicle locks. The setting is stored for the remote control in use. 1. "Settings" 2. "Door locks" Opening and closing: from the inside 3.
Controls Opening and closing Provide edge protection Sharp or angular objects can hit the rear window while driving and damage the heating wires of the rear window. Provide edge protec‐ tion.◀ In some market-specific versions, the tailgate can only be unlocked using the remote control if the vehicle was unlocked first. Pull the handle. The tailgate is unlocked. MINI Convertible: 1. Using the integrated key, unlock the lock of the rear seat backrests 1.
Opening and closing MINI Convertible, MINI Roadster: emergency unlocking Pull the handle in the cargo area. The tailgate is unlocked. Closing Keep the closing area clear Make sure that the closing area of the tailgate is clear; otherwise, injuries or damage may result.◀ Take the remote control with you Always take the remote control with you when leaving the vehicle and do not place it in the cargo area; otherwise, the remote control may be locked into the vehicle when the tail‐ gate is closed.
Controls Opening and closing ▷ The engine can only be started if the re‐ mote control is inside the vehicle. opened and closed when a remote control is lo‐ cated inside the vehicle. ▷ The doors and tailgate must be closed to operate the windows. Unlocking the tailgate separately Press the button on the exterior of the tailgate. Comparison with ordinary remote control The functions can be controlled by pressing the buttons or via Comfort Access. Notes on opening and closing, refer to page 30.
Opening and closing To switch off the engine with the selector lever in position N, the remote control must be in‐ serted in the ignition lock. Before driving a vehicle with automatic transmission into a car wash 1. Insert the remote control into the ignition switch. 2. Depress the brake pedal. 3. Move the selector lever to position N. Controls The indicator lamp lights up and a mes‐ sage appears on the Control Display: re‐ place the remote control battery.
Controls Opening and closing ▷ An acoustic alarm. ▷ LEDs pulse or LED flashes: system is armed. ▷ Switching on the hazard warning flashers. ▷ One LED flashes at short intervals: Whenever the car is locked or unlocked, the alarm system is armed or disarmed. Doors, engine compartment lid or tailgate are not properly closed. Even if these are not closed fully, the remaining items are locked and the LEDs pulse after approx. 10 seconds for approx. 16 minutes. After‐ wards, one LED flashes.
Opening and closing alarm can be triggered unintentionally by fall‐ ing objects such as leaves, refer to Avoiding un‐ intentional alarms. Controls Opening Avoiding false alarms The tilt alarm sensor and the interior move‐ ment detector can be switched off together. ▷ In duplex garages. ▷ When being transported on car-carrying trains, ferries or trailers. ▷ If pets are to remain inside the car.
Controls Opening and closing MINI Convertible: central power windows switch MINI Convertible: convertible top with integrated sliding sun‐ roof If possible, conserve the battery by only operat‐ ing the convertible top while the engine is run‐ ning. ▷ Press the switch downward. The rear and front windows open consecu‐ tively until the switch is released. ▷ Press the switch downward briefly.
Opening and closing amount of theft protection. However, even when the convertible top is closed, valua‐ bles should only be stored in the locked cargo area. ▷ Do not attach roof rack systems to the convertible top. ▷ If you open the convertible top while it is wet, e.g., after driving in the rain, water may drip into the cargo area. If necessary, remove items from the cargo area before‐ hand to avoid water stains or soiling.
Controls Opening and closing Pay close attention to the traffic When operating the convertible top while driving, pay extra attention to the traffic to avoid an accident. If possible, do not move the convertible top while driving in reverse because your view to the rear is severely limited during the procedure. Do not operate the convertible top while the vehicle is moving through curves, on uneven road surfaces, or in wind.
Opening and closing Controls 2. Pry out the trunk lamp in the left side trim using the screwdriver, arrow. 3. Pull the sensor out of the cover, arrow, and set it down on the inside side trim. 3. Using the screwdriver, unscrew the goldcolored screw by approx. one and a half turns. 4. Release the second screw, arrow, using the hex key to unlock the convertible top. Unlocking the convertible top 1. Release the screw, arrow, using the hex key and take it out. 5. Take out the screw. 6.
Controls Opening and closing Closing the convertible top 1. Hold on to the convertible top on the re‐ spective side frames with both hands. Ensure that the locking pieces do not fall onto the vehicle, as this could cause dam‐ age. 4. Insert the pins into the respective mount on the cowl, arrow. 2. Lift it out on both sides and pivot it forward onto the cowl. 3. In the vehicle, pry out the cover in the mid‐ dle of the roof using the screwdriver. Closing the sliding sunroof 1.
Opening and closing 2. Unfold the wind deflector, see arrows. Controls 4. Push out retaining pin 2 until it engages. 5. Fold up the upper part of the wind deflec‐ tor. 3. Push together the catches until they en‐ gage, see arrows. Do not damage the wind deflector In the rearmost seat position, do not in‐ cline the backrest too far back; otherwise, the wind deflector could be damaged.◀ Removing and folding up The unit is removed in the reverse order from which it was mounted.
Controls Opening and closing To ensure that you will continue to enjoy your MINI Convertible, here are a few tips: ▷ It is advisable that you close the convertible top when you park the vehicle. Not only does the closed convertible top protect the vehicle interior against unanticipated weather damage, it also offers a certain amount of theft protection. However, even when the convertible top is closed, valua‐ bles should only be stored in the locked cargo area.
Opening and closing Closing 1. Switch the ignition on so that the windows can be slightly lowered automatically. Re‐ move the wind deflector if necessary. 2. Press button 1. The convertible top is unlocked and moves up slightly. Controls vehicle interior against unanticipated weather damage, it also offers a certain amount of theft protection. However, even when the convertible top is closed, valua‐ bles should only be stored in the locked cargo area.
Controls Opening and closing Operation while driving The convertible top can be opened or closed while driving at vehicle speeds up to approx. 20 mph/30 km/h. Pay close attention to the traffic When operating the convertible top while driving, pay extra attention to the traffic to avoid an accident. If possible, do not move the convertible top while driving in reverse because your view to the rear is severely limited during the procedure.
Opening and closing 2. Push the unlocked convertible top upward at the handle and open it about a hand's width. Controls Manual closing in case of electrical malfunction Only close the convertible top manually if there is an electrical malfunction Only close the convertible top manually if this is absolutely necessary; never open it manually. Damage may occur if incorrectly operated. The closing procedure must be fully completed; otherwise, there is a risk of injury or damage.◀ Before closing 3.
Controls Opening and closing Closing Installation 1. Hold on to the convertible top frame and guide it to the windshield frame. 1. Insert the wind deflector with parts 1 facing back into the holders 2 on the rollover bars. 2. Fold out the handle and turn it counter‐ clockwise all the way to the stop. 3. Pull the convertible top onto the windshield frame. 4. Turn the handle clockwise until it engages audibly. The convertible top is locked. MINI Roadster: wind de‐ flector 2.
Adjusting Controls Adjusting Vehicle equipment Seat adjustment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Controls Adjusting Backrest tilt Pull the lever, arrow 1, and apply your weight to the backrest or lift it off, as necessary, ar‐ rows 2. Lumbar support You can also adjust the contour of the backrest to obtain additional support in the lumbar re‐ gion. The upper hips and spinal column receive sup‐ plementary support to help you maintain a re‐ laxed, upright sitting position. 1. Pull the lever on the back of the seat up‐ ward, arrow 1. The backrest folds forward. 2.
Adjusting Seat heating Controls The shoulder strap's anchorage point will be correct for adult seat occupants of every build if the seat is correctly adjusted. One person per safety belt Never allow more than one person to wear a single safety belt. Never allow infants or small children to ride on a passenger's lap.◀ Putting on the belt The temperature setting progresses one step through its control sequence each time you press the button. The maximum temperature is reached when three LEDs are lit.
Controls Adjusting Unbuckling the belt Head restraints 1. Hold the belt firmly. 2. Press the red button in the belt buckle. Correctly set head restraint 3. Guide the belt back into its reel. A correctly adjusted head restraint reduces the risk of spinal injury in the event of an accident. MINI Convertible: rear belt guide Adjusting the head restraint Correctly adjust the head restraints of all occupied seats; otherwise, there is an increased risk of injury in an accident.
Adjusting Before transporting passengers Reinstall the head restraint before trans‐ porting anyone in the seat; otherwise, the pro‐ tective function of the head restraint is unavail‐ able.◀ Controls Adjusting manually If an electrical malfunction occurs, for example, press the edges of the mirror glass. Folding the mirror in and out Turn the knob past the resistance point in di‐ rection 2. Mirrors The mirror can be folded in up to a vehicle speed of approx. 20 mph/30 km/h.
Controls Adjusting Interior rearview and exterior mirrors, automatic dimming feature 2. Move the steering wheel to the preferred height and angle to suit your seating posi‐ tion. 3. Fold the lever back. Do not use force to swing the lever back. Do not use force to swing the lever back up; otherwise, the mechanism will be dam‐ aged.◀ Two photocells are used for control: ▷ In the mirror frame, see arrow. ▷ On the back of the mirror. For proper operation: ▷ Keep the photocells clean.
Transporting children safely Controls Transporting children safely Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Controls Transporting children safely and side airbags on the front passenger side are deactivated. MINI Coupe, MINI Roadster Deactivating the front passenger airbags If a child restraint fixing system is used in the front passenger seat, the front passenger airbags must be deactivated; otherwise, there is an increased risk of injury to the child when the airbags are triggered, even with a child re‐ straint fixing system.
Transporting children safely Controls 3. Allow the belt webbing to be pulled in com‐ pletely. Pass the safety belt to the holder on the headliner. MINI Convertible: LATCH child restraint fixing system LATCH: Lower Anchors and Tethers for Children.
Controls Transporting children safely There is one additional mounting point for child restraint fixing systems with a tether strap, ar‐ row. 1 Direction of travel 2 Head restraint 3 Separating wall MINI Convertible: 4 Cargo area floor 5 Hook for the tether strap 6 Mounting point 7 Backrest 8 Tether strap of the child restraint fixing sys‐ tem MINI Convertible: There are two additional mounting points for child restraint fixing systems with a tether strap, arrows.
Transporting children safely Controls Attaching the upper retaining strap to the mounting point MINI Coupe 1. Remove the front cargo cover, refer to page 115. 2. Slide the head restraint upward. 3. Guide the tether strap between the head restraint supports. 4. Hook in the tether strap on the mounting point with the hook. 5. Slide the head restraint into the bottom po‐ sition. 6. Pull the tether strap taut.
Controls Driving Driving Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Automatic transmission You can only take out the remote control if transmission position P is engaged: interlock.
Driving Controls To save battery power when the engine is off, switch off the ignition and any unnecessary electronic systems/power consumers. Do not wait for the engine to warm-up while the vehicle remains stationary; start driving right away, but at moderate engine speeds. Radio ready state and ignition off Do not depress the accelerator when starting the engine. All indicator and warning lamps in the displays go out.
Controls Driving Engine stop Handbrake General information The concept Take the remote control with you Take the remote control with you when leaving the vehicle so that children, for exam‐ ple, cannot operate the windows and injure themselves.◀ Set the handbrake and further secure the vehicle as required Set the handbrake firmly when parking; other‐ wise, the vehicle may roll.
Driving Turn signal, high beams, headlamp flasher Controls 3. "Triple turn signal" The setting is stored for the remote control cur‐ rently in use. 1 Turn signal 2 Switching on the high beams 3 Switching off the high beams/headlamp flasher Washer/wiper system Notes Turn signal Do not switch on the wipers if frozen Press the lever beyond the resistance point. To switch off manually, press the lever to the resistance point.
Controls 3 4 Driving Activating/deactivating intermittent wipe or the rain sensor Cleaning the windshield and headlamps Switching on wipers Press the wiper lever upward, arrow 1. The lever automatically returns to its initial po‐ sition when released. Deactivate the rain sensor in car washes Deactivate the rain sensor when passing through an automatic car wash; otherwise, damage could be caused by undesired wiper activation.◀ Activating intermittent wipe or rain sensor Press the button, arrow 3.
Driving 5. Press and hold the button until the display changes. Controls Do not use the washing facilities when the hood is open Only use the washing facilities when the hood is fully locked; otherwise, the headlamp washer system may become damaged.◀ Windshield washer nozzles The windshield washer nozzles are heated au‐ tomatically while the engine is running or the ignition is switched on. 6. Press the button to select the desired sensi‐ tivity. Washer fluid 7.
Controls Driving Pay attention to the shift plane When shifting into 5th or 6th gear, push the gearshift lever to the right; otherwise inad‐ vertent shifting into the 3rd or 4th gear could lead to engine damage.◀ Reverse gear All washer nozzles are supplied from one reser‐ voir. Fill with a mixture of window washing concen‐ trate and water; if needed, add antifreeze ac‐ cording to the manufacturer instructions. Mix the washer fluid before adding to maintain the correct mixing ratio.
Driving Displays in the tachometer Controls P Park Select only when the vehicle is stationary. The front wheels are blocked. R is Reverse Select only when the vehicle is stationary. N is Neutral For example, engage this position in a car wash. The vehicle can roll. The selector lever position is displayed and the engaged gear, such as M4, is displayed in manual mode.
Controls Driving Activating the M/S manual mode Move the selector lever from position D toward the left into the M/S shifting slot. Push the selector lever forward or backward. Manual mode becomes active and the gear is changed. The tachometer displays the engaged gear, e. g. M1. ▷ To shift up: press the selector lever back‐ ward. ▷ Pull one of the two shift paddles: ▷ To shift down: press the selector lever for‐ ward.
Driving Controls 4. Insert the pulling hook 1 from the onboard vehicle tool kit into the loop on the passen‐ ger side. 5. Pull the loop upward. 6. Move the selector lever into the desired po‐ sition, pressing the button on the front of the selector lever. Set the handbrake Before manually unlocking the selector lever lock, pull the handbrake firmly; otherwise, the vehicle may roll away and cause personal injury or property damage.◀ Online Edition for Part no.
Controls Displays Displays Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Odometer, external tem‐ perature display, clock At a glance Trip odometer To display the trip odometer: briefly press knob 3.
Displays Controls Range Tachometer After the reserve range is reached: ▷ The remaining LEDs change from orange to red, arrow. ▷ A message is briefly displayed on the Con‐ trol Display. ▷ The remaining range is shown on the tach‐ ometer. It is imperative that you avoid engine speeds in the red warning field. In this range, the fuel supply is interrupted to protect the engine. ▷ When a dynamic driving style is used, such as when corners are taken rapidly, engine functions are not ensured.
Controls Displays ▷ Average speed. Displays on the Control Display ▷ MINI Roadster, MINI Convertible: Always Open Timer. Display the computer or trip computer on the Control Display. To set the corresponding units of measure, re‐ fer to page 78. 1. "Vehicle Info" 2. "Onboard info" or "Trip computer" Information in detail Range Displays the estimated cruising range available with the remaining fuel. It is calculated based on your driving style over the last 18 miles/30 km.
Displays Both displays show: ▷ Average fuel consumption. ▷ Average speed. Controls To reset the current driving time: press the but‐ ton on the turn indicator lever or button 2 for approx. 2 seconds while the driving times are displayed. Resetting the fuel consumption and speed To reset the total driving time, contact the serv‐ ice center. Resetting the values for average speed and average fuel consumption: Analog Always Open Timer 1. Select the respective menu item and press the MINI joystick. 2.
Controls Displays Exiting displays 1 Button for: ▷ Selecting the display. ▷ Setting values. 1. Press the button on the turn indicator lever repeatedly until "HOME" is displayed. ▷ Confirming the selected display or set values. 2. Hold the button down. ▷ Calling up computer information 75. Displays are also exited if no entries are made within approx. 8 seconds. Symbol Function Set the rain sensor, refer to page 68. The current speed is displayed again.
Displays changed. The settings are stored for the remote control currently in use. Controls 3. "Time:" 1. "Settings" 2. "Language/Units" 4. Turn the MINI joystick to set the hours and press the MINI joystick. 3. Select the desired menu item. 4. Select the desired unit. 5. Turn the MINI joystick to set the minutes and press the MINI joystick. The time is stored. Setting the time format Clock 1. "Settings" 2. "Time/Date" Setting the time 3. "Format:" 1. "Settings" 4. Select the desired format.
Controls Displays 3. "Date:" 3. "Language:" 4. Turn the MINI joystick until the desired day is displayed and press the MINI joystick. 5. Make the necessary settings for the month and year. The date is stored. Setting the date format 1. "Settings" 2. "Time/Date" 4. Select the desired language. 3. "Format:" 4. Select the desired format. The setting is stored for the remote control cur‐ rently in use. Setting the voice dialog Voice dialog for the voice activation system, re‐ fer to page 25.
Controls Displays Service requirements Symbols Symbols Description No service is currently required. The deadline for service or a le‐ gally mandated inspection is approaching. The remaining driving distance and the date of the next scheduled service are displayed briefly immediately after you start the engine or switch on the ignition. The service deadline has al‐ ready passed. Entering appointment dates Enter the dates for the required inspections.
Controls Displays 7. Create the settings. 8. Press the MINI joystick to apply the setting. The year is highlighted. 9. Turn the MINI joystick to create the setting. 10. Press the MINI joystick to apply the setting. The date entry is stored. To exit from the menu: Move the MINI joystick to the left. Check Control The symbol indicates that Check Control messages have been stored. The Check Control messages can be displayed later.
Displays Hiding Check Control messages Controls Viewing stored Check Control messages The stored Check Control messages can only be displayed while the driver's door is closed. 1. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed. Press the button on the turn indicator lever. Some Check Control messages are displayed continuously and are not cleared until the mal‐ function is eliminated.
Controls Displays Displaying on the Control Display 1. "Vehicle Info" 2. "Vehicle status" 3. "Check Control" 4. Select the text message. 84 Online Edition for Part no.
Lamps Controls Lamps Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Switch on the parking lamps if necessary, switch position 1.
Controls Lamps When the daytime running lights are activated, the low beams are always switched on in switch position 3 when the ignition is switched on. The exterior lighting goes out automatically af‐ ter the vehicle is switched off. High beams/roadside parking lamps The exterior lighting goes out automatically af‐ ter the vehicle is switched off. In switch position 1, the parking lamps light up after the ignition is switched off. Activating/deactivating 1. "Settings" 2. "Lighting" 3.
Lamps Controls Fog lamps 3. "Pathway light.: s" MINI Coupe, MINI Roadster 4. Set the duration. The setting is stored for the remote control cur‐ rently in use. 1 Fog lamps 2 Rear fog lamp Adaptive Light Control To switch on/off, press the respective button. The concept MINI Convertible Adaptive Light Control is a variable headlamp control system that enables dynamic illumina‐ tion of the road surface.
Controls Lamps If the automatic headlamp control is activated, refer to page 85, the low beams are switched on automatically when the front fog lamps are switched on. Switching interior lamps on/off manually Rear fog lamp The low beams or parking lamps with front fog lamps must be switched on. The yellow indica‐ tor lamp lights up when the rear fog lamp is switched on. Instrument lighting The parking lamps or low beams must be switched on to adjust the brightness.
Lamps Controls To switch on the reading lamps: press the switch forward. To switch off, press the respective switch for‐ ward or back again. Ambient lighting The color and brightness of the ambient light‐ ing can be changed. Press the switch forward: the color changes in steps. Press the switch back: the brightness changes in steps. Intermediate settings and intermediate colors are possible. For continuously changing colors of the ambi‐ ent lighting, press the switch forward for more than 10 seconds.
Controls Safety Safety Vehicle equipment Information on how to ensure the opti‐ mal protective effect of the airbags This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. ▷ Keep at a distance from the airbags.
Safety ▷ Never modify either the individual compo‐ nents or the wiring in the airbag system. This also applies to steering wheel covers, the dashboard, the seats, the roof pillars and the sides of the headliner.◀ Even when all instructions are followed closely, injury from contact with the airbags cannot be ruled out in certain situations. The ignition and inflation noise may lead to short-term and, in most cases, temporary hear‐ ing impairment in sensitive individuals.
Controls Safety Indicator lamp for the front passenger airbags The indicator lamp for the front passenger air‐ bags indicates the operating state of the front passenger airbags. The lamp indicates whether the airbags are ac‐ tivated or deactivated. ▷ The indicator lamp lights up when a child in a child re‐ straint fixing system in‐ tended for the purpose is properly detected on the seat. The airbags on the front passenger side are not acti‐ vated.
Safety Do not obstruct the area of movement Always keep the area of movement of the rollover protection system clear. In light acci‐ dents, you are protected by the fastened safety belt and, depending on the severity of the acci‐ dent, the belt tightener and the multi-level air bag restraint system.◀ Lowering Have the service center check the rollover pro‐ tection system after it is deployed unexpect‐ edly.
Controls Safety Indication of a flat tire 3. "Flat Tire Monitor" The warning lamps come on in yellow and red. A message appears on the Control Display. In addition, a signal sounds. There is a flat tire or a major loss in tire inflation pressure. 1. Reduce your speed and stop cautiously. Avoid sudden braking and steering maneu‐ vers. The status is displayed. 2. Check whether the vehicle is fitted with regular tires or run-flat tires.
Safety Run-flat tires You can continue driving with a damaged tire at speeds up to 50 mph/80 km/h. Continued driving with a flat tire If continuing to drive with a damaged tire: 1. Avoid sudden braking and steering maneu‐ vers. 2. Do not exceed a speed of 50 mph/80 km/h. 3. At the next opportunity, check the inflation pressure in all four tires. If the tire inflation pressure in all four tires is correct, the Flat Tire Monitor may not have been initialized. In this case, initialize the system.
Controls Safety The system is inactive and cannot indicate a flat tire: ▷ If a wheel without TPM electronics is mounted, e.g., compact wheel. ▷ For a mounted wheel without TPM elec‐ tronics. All wheels are yellow ▷ A flat tire or major drop in inflation pressure in several tires. ▷ The system was not reset after a wheel change and thus issues a warning based on the inflation pressures initialized last. ▷ When the TPM is disturbed by other sys‐ tems or devices with the same radio fre‐ quency.
Safety completed automatically as you drive. On the Control Display, the tires are shown in green and "Status: TPM active" is displayed again. The trip can be interrupted at any time. If you drive away again, the process resumes auto‐ matically. If a flat tire is detected while the system is re‐ setting, all tires on the Control Display are dis‐ played in yellow. The message "Low tire!" is shown. Low tire pressure message The warning lamps come on in yellow and red.
Controls Safety For a vehicle containing an average load, the possible driving distance is ap‐ prox. 50 miles/80 km. When the vehicle is driven with a damaged tire, its handling characteristics change, e.g., re‐ duced lane stability during braking, a longer braking distance, and altered self-steering properties. Adjust your driving style accord‐ ingly. Avoid abrupt steering maneuvers or driv‐ ing over obstacles, e. g., curbs, potholes, etc.
Safety pressure label, you should determine the proper tire inflation pressure for those tires.). Speed limit As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pres‐ sure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pres‐ sure.
Controls Safety 3. "Select current speed" 4. Press the MINI joystick. The system adopts your current speed as the limit. Activating/deactivating the limit 1. "Settings" 2. "Speed" 3. "Warning" 4. Press the MINI joystick. 100 Online Edition for Part no.
Driving stability control systems Controls Driving stability control systems Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Controls Driving stability control systems Press the button until the DSC OFF indi‐ cator lamp lights up in the speedometer and DSC OFF appears in the tachome‐ ter. DSC is deactivated. Intervening measures to stabilize the vehicle and give it forward mo‐ mentum are no longer executed. When driving with snow chains or to rock the vehicle free of snow, it may be useful to deacti‐ vate DSC temporarily. To increase vehicle stability, activate DSC again as soon as possible.
Driving stability control systems Indicator/warning lamps The indicator lamp in the tachometer flashes: DTC is controlling the drive forces and brake forces. The indicator lamp lights up: DSC and DTC has failed. The indicator lamp in the speedometer lights up and TRACTION appears in the tachometer. Controls ▷ The engine responds more spontaneously to accelerator movements. ▷ The steering responds more directly. ▷ Cooper S, John Cooper Works: the engine sounds sportier when coasting.
Controls Driving stability control systems Notes on the car washes and care, refer to page 259. Automatic operation If the rear spoiler is retracted, it is in automatic mode when the engine is started. In this case, the system is initialized when the vehicle is set into motion; this may cause a short noise to be heard. Automatic extension: When the vehicle exceeds a speed of ap‐ prox. 50 mph/80 km/h.
Driving comfort Controls Driving comfort Vehicle equipment Controls This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. At a glance Cruise control The concept The system is functional at speeds beginning at approx.
Controls Driving comfort ▷ The transmission position D is disengaged. Display in the tachometer ▷ DSC intervenes. Maintaining, storing the current speed Press button 1 or button 3. The current speed is maintained and stored. It is displayed briefly in the tachometer. On downhill gradients, it may prove impossible to maintain the set speed if the engine braking power is insufficient. On uphill gradients, it may prove impossible to maintain the set speed if the engine power output is insufficient.
Driving comfort ▷ By the rear middle sensors at approx. 5 ft/1.50 m. Avoid driving quickly with PDC PDC is a parking aid that can display ob‐ jects when the vehicle approaches them slowly, as is the case during parking maneuvers. Avoid driving toward an object quickly as the system may then be too late in issuing a warning for technical reasons.◀ Automatic operation The system is activated after approx.
Controls Climate Climate Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Controls Climate Cooling function Temperature The passenger compartment can only be cooled with the engine running. The cooling function cools and dehumidifies the incoming air before reheating it as required, according to the temperature setting. The cooling function helps to prevent conden‐ sation on the windows or to remove it quickly. Depending on the weather, the windshield may fog up briefly when the engine is started.
Controls Climate Microfilter The microfilter traps dust and pollen. The mi‐ crofilter is changed by the service center during routine maintenance work. tion by filtering gaseous pollutants from the outside air. The service center replaces this combined filter during routine maintenance. Microfilter/activated-charcoal filter The microfilter traps dust and pollen.
Controls Climate Air volume, manual Press the – button to reduce the air volume. Press the + button to increase the air volume. The automatic mode for the air volume can be switched on again using the AUTO button. The air flow rate may be reduced or the blower may be switched off entirely to save on battery power. The display remains the same. Switching the system on/off Reduce the air volume by pressing the – button until the system is switched off. All displays go out.
Controls Climate Manual air distribution The flow of air is directed, as se‐ lected, to the windows, to the upper body area, or to the foot‐ well. The automatic mode for the air distribution can be switched back on using the AUTO button. Temperature Set the desired temperature in‐ dividually. The automatic climate control achieves this temperature as quickly as possible regardless of the season, using maximum cooling or heating power if necessary, and then maintains it.
Climate Controls Ventilation 1 Knob for continuous opening and closing 2 Nozzle for direction of air flow Opening/closing Turn the knob. Direction of air flow Pivot the entire nozzle. Online Edition for Part no.
Controls Interior equipment Interior equipment Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Ashtray The ashtray is located in one of the cupholders in the center console at the front.
Interior equipment Avoid damaging the sockets by attempting to insert plugs of unsuitable shape or size. Do not connect the charger to the socket Do not connect the battery charger to the socket installed in the vehicle at the factory as this could damage the battery.◀ Replace the cover after use Replace the lighter or socket cover after use; otherwise, objects that fall into the lighter socket or power socket could cause a short cir‐ cuit.
Controls Interior equipment MINI Coupe, MINI Roadster: throughloading opening Securing cargo Always secure transported snowboards or similar objects as they could otherwise endan‐ ger occupants during braking or swerving.◀ 1. Fold the seat forward if necessary, refer to page 54. 2. Unlock the lock using the integrated key, refer to page 30.
Interior equipment Controls 3. Slide into the upper holders, arrows 2, and set down horizontally. Move the trunk cover back into the lower posi‐ tion so that the convertible top can be oper‐ ated. Through-loading system To enable the transport of larger objects, the rear seat backrest can be folded down. 1. Using the integrated key, unlock the lock 1 of the rear seat backrest. 2. Press button 2 and fold the rear seat back‐ rest forward while guiding the safety belt. 3. Fold down the backrest.
Controls Storage compartments Storage compartments Vehicle equipment ▷ Nets on the back of the front seat backrests and in the front passenger footwell. This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Storage compartments MINI Convertible, MINI Roadster: locking Lock the glove compartment using the integrated key of the remote control, refer to page 30. Controls Center armrest The center armrest between the front seats contains a storage compartment or a cover for the snap-in adapter, refer to page 202, de‐ pending on the version. Ventilation Depending on the vehicle's equipment, the glove compartment can be ventilated and, if the cooling function is switched on, cooled.
Controls Storage compartments Close the storage compartment again im‐ mediately after use. Close the storage compartment again immedi‐ ately after use while driving; otherwise, injury may occur during accidents.◀ Connection for an exter‐ nal audio device MINI Convertible, MINI Roadster The storage compartment cannot be locked. MINI Coupe, MINI Road‐ ster: rear storage shelf behind the seats This can be used to connect an external audio device, refer to page 171, such as a CD or MP3 player.
Storage compartments Online Edition for Part no.
Online Edition for Part no.
At a glance Controls Driving tips Navigation Entertainment Communication Mobility Reference Online Edition for Part no.
Driving tips Things to remember when driving Things to remember when driving Vehicle equipment tion potential until after an initial breaking-in period. This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Things to remember when driving Closing the tailgate Drive with the tailgate closed Only drive with the tailgate closed; other‐ wise, passengers and other road users may be endangered or the vehicle may be damaged if an accident occurs or during braking or swerv‐ ing. In addition, exhaust fumes may enter the passenger compartment.◀ If, despite this, the vehicle must be driven with the tailgate open: ▷ Drive moderately. ▷ Coupe: close all windows.
Driving tips Things to remember when driving Braking safely The vehicle is equipped with ABS as a standard feature. Applying the brakes fully is the most effective way of braking in situations when this is neces‐ sary. The vehicle maintains steering responsiveness. You can still avoid any obstacles with a mini‐ mum of steering effort. Pulsation of the brake pedal and sounds from the hydraulic circuits indicate that ABS is in its active mode.
Things to remember when driving Driving tips When the vehicle is parked When using the automatic climate control, con‐ densation water develops that exits under‐ neath the vehicle. Therefore, traces of condensed water under the vehicle are normal. After the engine is switched off, the coolant pump may continue running for some time in the MINI Cooper S. This causes noises in the en‐ gine compartment. Online Edition for Part no.
Driving tips Loading Loading Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Loading Driving tips MINI Coupe, MINI Roadster MINI Convertible: MINI Convertible The maximum load is the sum of the weight of the occupants and the cargo. The greater the weight of the occupants, the less cargo that can be transported. Securing cargo Stowing cargo Lashing eyes in the cargo area ▷ Very heavy cargo: when the rear seat is not occupied, secure each of the outer safety belts in the opposite buckle.
Driving tips Loading MINI Convertible Rear luggage rack Notes A special rear rack is available as an optional accessory. It does not require a trailer hitch. Follow the installation instructions for the rear rack. Anchorage points Securing cargo ▷ Secure smaller and lighter pieces with tight‐ ening belts or straps. ▷ Secure larger and heavier pieces with cargo straps. Adhere to the information included with the cargo straps. ▷ Four lashing eyes are available for fastening the cargo straps.
Saving fuel Driving tips Saving fuel Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. General information Your vehicle contains advanced technology for the reduction of fuel consumption and emis‐ sions.
Driving tips Saving fuel Switch off the engine during longer stops Switch off the engine during longer stops, e.g., at traffic lights, railroad crossings or in traffic congestion. Fuel savings are already achieved after the en‐ gine is turned off for as little as 4 seconds. Automatic Engine Start/Stop Function The Automatic Engine Start/Stop Function auto‐ matically switches the engine off during a stop.
Saving fuel Online Edition for Part no.
Online Edition for Part no.
At a glance Controls Driving tips Navigation Entertainment Communication Mobility Reference Online Edition for Part no.
Navigation Navigation system Navigation system Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Navigation data Information on navigation data 1. "Navigation" 2. Open "Options". 3.
Navigation system Navigation When the update is completed, the system re‐ starts. Online Edition for Part no.
Navigation Destination entry Destination entry Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Destination entry Navigation If there are several towns/cities with the same name: Street does not exist in the destination city/town 1. Change to the list of town/city names. The desired street does not exist in the speci‐ fied city/town because it belongs to another part of the city/town. 2. Highlight the town/city. 3. Select the town/city. 1. "Navigation" Entering the postal code 2. "Enter address" 1. Select "Town/City/Postal Code" or the dis‐ played town/city. 3.
Navigation Destination entry Add a destination as a further destination, refer to page 146. Storing the destination in the address book After entering the destination, store the desti‐ nation in the address book. 1. "Navigation" 2. "Map" 3. "Guidance" 4. Open "Options". 5. "Store as new contact" or "Add to existing contact" Address book Create contacts, refer to page 189. Selecting a destination from the address book 1. "Navigation" 2.
Destination entry 3. "Store position as contact" or "Add position to contact" Navigation 3. "Home" 4. "Start guidance" 4. Depending on the selection, choose an ex‐ isting contact from the list. Select the type of address and enter the first and last name. At a glance 5. "Store in vehicle" Editing or deleting an address 1. "Navigation" 2. "Address book" 3. Highlight the entry. 4. Open "Options". 5.
Navigation Destination entry Editing the destination 5. Select the category. Destinations can be edited, for example to change the house number of an existing entry. 6. "Category details" For some special destinations, it may be possible to select multiple category details. Move the MINI joystick to the left to leave the category details. 1. "Navigation" 2. "Last destinations" 3. Highlight the destination. 4. Open "Options". 7. "Keyword" 8. Enter the keyword. 5.
Destination entry If a phone number is available, a connec‐ tion can be established if necessary. 9. ▷ Destinations of the selected category are displayed in the map view as sym‐ bols. The display depends on the map scale and the category. Select the symbol. 10. "Start guidance" or "Add as another destination" Add a destination as a further destination, refer to page 146. Position of special destinations When entering the search location, various op‐ tions can be selected. Navigation 3.
Navigation Destination entry Selecting the destination 1. "Navigation" Pressing the MINI joysticks makes additional functions available: 2. "Map" The current position of the vehicle is dis‐ played on the map. 3. "Interactive map" ▷ Select the symbol. "Start guidance" or "Add as another destination" 4. Select the destination with crosshairs. ▷ To change the scale: turn the MINI joy‐ stick. ▷ To shift the map: move the MINI joy‐ stick in the required direction.
Destination entry Example: to enter a town/city in a US states as a whole word, the language of the sys‐ tem must be English. ▷ Spell the entry if the spoken language and the language of the system differ. ▷ Say the letters smoothly, and avoid exag‐ gerating the pronunciation and inserting lengthy pauses between the letters. ▷ The methods of entry depend on the navi‐ gation data in use and the country and lan‐ guage settings.
Navigation Destination entry Entering intermediate destinations A maximum of 30 intermediate destinations can be entered for a trip. 1. "Navigation" 2. Select the type of destination entry and en‐ ter the intermediate destination. 3. "Add as another destination" 4. Select the position where the intermediate destination is to be inserted. Starting the trip After all intermediate destinations have been entered: "Start guidance" 146 Online Edition for Part no.
Navigation Destination guidance Destination guidance Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Starting destination guidance 1. "Navigation" 2. Make a destination entry, refer to page 138. 3.
Navigation ▷ Destination guidance "Short route": short distance, irre‐ spective of how fast or slow progress will be. ▷ "Alternative routes": if available, alter‐ native routes are suggested during ac‐ tive destination guidance. ▷ Small arrow: indicates the next change in direction. ▷ Intersection view. ▷ Lane information. ▷ Traffic bulletins. ▷ Distance to the next change in direction. ▷ Street name at the next change in direc‐ tion.
Destination guidance 6. 3. "New route for" Navigation Select the symbol. 7. "Start guidance": destination guidance to the selected gas station is started. "Add as another destination": the gas sta‐ tion is added to the route. 4. Turn the MINI joystick. Enter the number of kilometers within which you would like to return to the original route. Destination guidance through voice instruc‐ tions Switching spoken instructions on/off 5. Press the MINI joystick.
Navigation Destination guidance tion. Dashed lines represent railways and ferry connections. Country borders are indicated by thin lines. Traffic obstructions This volume is independent of the volume of the audio sources. The setting is stored for the remote control cur‐ rently in use. Small triangles along the planned route indicate route sections with traffic obstructions, de‐ pending on the map scale. The direction of the triangles indicates the direction of the obstruc‐ tion.
Destination guidance Symbol Function Display traffic bulletins. Open the interactive map. Adjust the map views. Adjust the arrow view. Change the scale. Changing the map section "Interactive map" ▷ To shift the map: move the MINI joystick in the required direction. ▷ To shift the map diagonally: move the MINI joystick in the required direction and turn the MINI joystick. Navigation "Traffic conditions/gray map" active: the setting is disregarded.
Navigation Destination guidance Real Time Traffic Information End-User Provisions Certain MINI models equipped with navigation have the capability to display real-time traffic information. If your system has this capability the following additional terms and conditions apply: An End-User shall no longer have the right to use the Traffic Data in the event that the EndUser is in material breach of the terms and con‐ ditions contained herein. A.
Destination guidance The Control Display changes to a black and white display. This enables a better view of the traffic bulletins. The day/night mode is disre‐ garded in this setting. Symbols and special des‐ tinations are not displayed. Navigation 4. "Traffic Info categories" 5. Select the desired category. 1. "Navigation" 2. "Map" 3. Open "Options". 4. "Settings" 5.
Navigation Destination guidance In the event of special hazards, e. g., objects on the road, a message is displayed without a de‐ tour suggestion. Detours can also be accepted if the traffic mes‐ sages are called up in the list. 1. "Navigation" 2. "Map" 3. "Traffic Info" 4. "Detour information" 5. "Detour" Dynamic destination guidance The route is automatically changed in the event of traffic obstructions. ▷ The system does not point out traffic ob‐ structions along the original route.
What to do if... Navigation What to do if... Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. What to do if...
Online Edition for Part no.
At a glance Controls Driving tips Navigation Entertainment Communication Mobility Reference Online Edition for Part no.
Entertainment Tone Tone Vehicle equipment 3. Select the desired tone settings. This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. 4. To set: turn the MINI joystick.
Tone Entertainment 4. Select the desired volume setting. 5. To set: turn the MINI joystick. 6. To save: press the MINI joystick. Resetting the tone set‐ tings All tone settings can be reset to the default set‐ ting. 1. "CD/Multimedia", "Radio" or "Settings" 2. "Tone" 3. "Reset" Online Edition for Part no.
Entertainment Radio Radio Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Sound output Switching on/off Controls When the ignition is switched off: press ON/OFF button on the radio.
Radio All saved stations are stored for the remote control currently in use. Entertainment To save a station: press and hold the MINI joystick. Changing the station Turn and press the MINI joystick. or Press the button or Press the buttons on the steering wheel. Storing a station RDS 1. "Radio" RDS broadcasts additional information, such as the station name, in the FM wave band. 2. "FM" or "AM" 3. Highlight the desired station. Switching the RDS on/off 1. "Radio" 2. "FM" 3. Open "Options". 4.
Entertainment Radio Activating/deactivating digital radio reception 2. Press the controller. 1. "Radio" When reception is poor, the substation is muted. 2. "FM" or "AM" 3. Select the substation. 3. Open "Options". 4. "HD Radio Reception" The setting is stored for the remote control cur‐ rently in use. This symbol is displayed in the status line when the audio signal is digital.
Entertainment Radio 3. 5. The phone number and an electronic serial number, ESN, are displayed. "Category" 6. Call Sirius to unsubscribe from the channels. Selecting channels You can only listen to enabled channels. The selected channel is stored for the remote control currently in use. Via the onboard monitor 4. Select the Unsubscribed Channels category. 1. "Radio" 5. Select the desired channel. 2. "Satellite radio" The phone number and an electronic serial number, ESN, are displayed. 3.
Entertainment Radio Storing a channel Timeshift 1. "Radio" Approx. one hour of the program being broad‐ cast on the channel currently being listened to is stored in a buffer. Prerequisite: the signal must be available. 2. "Satellite radio" 3. If necessary, open "All channels" or the de‐ sired category. 4. Select the desired channel. 5. Press the MINI joystick again. 6. Press the MINI joystick again to confirm the highlighted channel.
Radio Symbol Entertainment Function Storing the league or team Reverse Leagues or teams can be added to the favorites from a selection list. Automatic timeshift deactivated/ activated 1. "Radio" 2. "Satellite radio" "Manage favorites" Automatic timeshift 3. When the function is activated, audio playback is stopped automatically in the event of: 4. "Add sports information" ▷ Incoming and outgoing telephone calls. ▷ Activation of the voice activation system. ▷ Muting.
Entertainment Radio Managing the favorites Symbol Meaning Information will be broadcast shortly. Activating/deactivating the favorites Information is currently being broad‐ cast. Favorites can be activated and deactivated globally and individually. 1. "Satellite radio" 2. "Manage favorites" 3. Select "Activate alert" or the desired favor‐ ites. The setting is stored for the remote control cur‐ rently in use. Deleting favorites 1. "Satellite radio" 2. "Manage favorites" 3.
Radio Entertainment 3. "Store station" 4. Select the desired memory location. The list of stored stations is stored for the re‐ mote control currently in use. Deleting a station 1. "Radio" 2. "Presets" 3. Select the desired station. 4. Open "Options". 5. "Delete entry" Online Edition for Part no.
Entertainment CD/multimedia CD/multimedia Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. CD player Playback Inserting the CD Insert the CD with the printed side facing up.
CD/multimedia Audio playback Entertainment 2. Select the desired track to begin playback. Selecting the track using the button Press the button for the appropri‐ ate direction as often as necessary until the de‐ sired track is played back. Selecting the track on the onboard monitor Audio CDs Displaying information on the track Select the desired track to begin playback. CDs with compressed audio files Depending on the data, some letters and num‐ bers of the CD may not be displayed correctly. 1.
Entertainment CD/multimedia 4. Open "Options". ▷ Only use round CDs with a standard diame‐ ter of 4.7 in/12 cm and do not play CDs with an adapter, e.g., single CDs; otherwise, the CDs or the adapter may jam and no lon‐ ger eject.◀ 5. "Random" General malfunctions ▷ The CD players have been optimized for performance in vehicles. In some instances they may be more sensitive to faulty CDs than stationary devices would be. To switch off random playback: press the MINI joystick.
Entertainment CD/multimedia that some CDs cannot be played or can only be played to a limited extent. Connecting The AUX-IN port is in the center console. MACROVISION This product contains copyrighted technology that is based on multiple registered US patents and the intellectual property of the Macrovision Corporation and other manufacturers. The use of this copy protection must be approved by Macrovision.
Entertainment CD/multimedia ▷ WMA. 4. "Volume" ▷ WAV (PCM). ▷ AAC, M4A. ▷ Without the voice activation system: play‐ back lists: M3U ▷ With the voice activation system: playback lists: M3U, WPL, PLS Video files 5. Turn the MINI joystick until the desired vol‐ ume is set and press the MINI joystick. USB audio interface/music interface for smartphones Standard video files can be played back with a compatible Apple device: ▷ MPEG4 ▷ H.
Entertainment CD/multimedia After connecting for the first time 3. Select the or symbol. Information on all music tracks, e.g. artist or type of music, as well as playback lists are transmitted into the vehicle. This may take some time, depending on the USB device and the number of tracks. During transmission, the tracks can be called up via the file directory. Number of tracks Information from up to four USB devices or for approx. 26,000 tracks can be stored in the ve‐ hicle.
Entertainment CD/multimedia Playback lists Calling up playback lists. countries, the handbrake must be set or P must be engaged. 1. "CD/Multimedia" 1. "CD/Multimedia" 2. "External devices" 2. "External devices" 3. Select the or symbol. 3. Select the or symbol. 4. "Video" 4. "Playlists" Current playback List of tracks currently being played. 1. "CD/Multimedia" 2. "External devices" 3. Select the or symbol. 4. "Current playback" 5. Select the desired file.
CD/multimedia Information on connection ▷ The connected audio device is supplied with a max. power of 500 mA if supported by the device. Therefore, do not addition‐ ally connect the device to a socket in the vehicle; otherwise, playback may be com‐ promised. Entertainment confirmation or visibility; refer to the device operating instructions. ▷ A number with at least four and a maxi‐ mum of 16 digits is defined as the Blue‐ tooth passkey. It is only required once for pairing.
Entertainment CD/multimedia Compare the control number on the vehicle display with the control number on the mo‐ bile phone display. Confirm the control number on the mobile phone and in the vehicle. "OK" 4. Select the desired device from the list of paired devices. 5. Open "Options". 6. "Configure phone" 7. Activate "Audio". 8. "OK" Connecting the device 1. "CD/Multimedia" 2. "Bluetooth® (audio)" 3. If necessary, "Bluetooth® audio". 4. Select the desired device from the list of paired devices. 8.
CD/multimedia 4. Select the symbol. Entertainment 4. Open "Options". 5. Open "Select player". 6. Select the desired channel. Disconnecting the audio connection 1. "CD/Multimedia" 2. "Bluetooth® (audio)" 3. Highlight the desired device. 4. Open "Options". 5. Select the desired track from the list, if nec‐ essary. 5. "Configure phone" Playback menu 7. "OK" Depending on the particular device, some of the functions may not be available. Symbol Function 6.
Entertainment CD/multimedia The device could not be paired or connected. ▷ Do the Bluetooth passkeys on the device and the vehicle match? Enter the same passkey on the device and via the onboard monitor. Playback is interrupted by a telephone call or traffic bulletin and is not resumed automati‐ cally. ▷ Switch the radio on and off again. ▷ Did it take longer than 30 seconds to enter the passkey? Repeat the pairing procedure.
CD/multimedia Entertainment 5. "Update software" 6. "Start update" 7. "OK" All listed software updates are installed. Restoring the previous version The software version prior to the last software update can be restored. The previous version can only be restored when the vehicle is stationary. 1. "Settings" 2. "Software update" 3. "Restore previous version" 4. "OK" Double-click. All listed software updates are removed.
Online Edition for Part no.
At a glance Controls Driving tips Navigation Entertainment Communication Mobility Reference Online Edition for Part no.
Communication Bluetooth hands-free system Bluetooth hands-free system Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Bluetooth hands-free system Communication ▷ Bluetooth presettings may need to be made on the mobile phone, e.g., for a con‐ nection without confirmation or visibility, refer to the mobile phone operating in‐ structions. pair the mobile phone while the vehicle is sta‐ tionary.◀ ▷ Deactivate Bluetooth audio if necessary. 3. "Add new phone" ▷ A number with at least four and a maxi‐ mum of 16 digits was defined as the Blue‐ tooth passkey. It is only required once for pairing. 1. "Telephone" 2.
Communication Bluetooth hands-free system 3. Select the mobile phone that is to be con‐ nected. "OK" 7. Select the functions for which the mobile phone is to be used. 8. "OK" 9. Move the MINI joystick to the left. If the pairing was successful, the mobile phone appears at the top of the list of mobile phones. If pairing was unsuccessful: What to do if..., re‐ fer to page 184. Unpairing the mobile phone 1. "Telephone" 2. "Bluetooth® (phone)" All paired mobile phones are listed. 3.
Bluetooth hands-free system ▷ A multi-character passkey may be needed. Communication ▷ Did it take longer than 30 seconds to enter the passkey? Repeat the pairing procedure. If all points in this list have been checked and the required function is still not available, con‐ tact Customer Relations or the service center. ▷ Are too many Bluetooth devices connected to the mobile phone or vehicle? Delete con‐ nections with other devices if necessary.
Communication Bluetooth hands-free system 3. Select the digits individually. 4. Select the symbol. Rejecting a call "Reject" The phone number can also be entered by voice. Ending a call Press the button on the steering wheel. General information or You can switch between calls or connect two calls to a single conference call. These functions must be supported by the mobile phone and service provider. 1. "Telephone" 2.
Bluetooth hands-free system The existing call is put on hold. Communication ces, e.g., to make a remote inquiry of an an‐ swering machine. The DTMF code is needed for this purpose. 1. "Telephone" 2. Select the contact from a list or "Dial number". 3. "Keypad dialing" 4. Dial the new phone number or select it from a list. "Return" The call on hold is resumed. Switching between two calls, hold call Active call: highlighted. Call on hold identified by: "on hold...". 4.
Communication Bluetooth hands-free system Calling a contact Dialing a number on the onboard monitor Symbol Meaning 1. "Telephone" Contact with one stored phone num‐ ber. 2. "Redial" Contact with more than one stored phone number. Call not possible; mobile phone with‐ out reception or network. For contacts with one stored phone number: select the required contact. The connection is being established.
Bluetooth hands-free system Communication those calls are displayed that were received in the vehicle. Hands-free system The 20 telephone calls that were last received are displayed. The sorting order and display of the phone numbers depends on the particular mobile phone. General information 1. "Telephone" Calls that are being made on the hands-free system can be continued on the mobile phone and vice versa. From the mobile phone to the handsfree system 2.
Communication Bluetooth hands-free system New contact My contacts 1. "Contacts" General information 2. "New contact" List of all contacts stored in the vehicle. Displaying contacts 1. "Contacts" 2. "My contacts" 3. The entry fields are still filled with the previ‐ ous entries: "Delete input fields" 4. Fill in the entry fields: select the symbol next to the entry field. All contacts are listed in alphabetical order. De‐ pending on the number of contacts, an A-Z search is offered.
Bluetooth hands-free system Communication 1. Select the desired contact. Selecting the sorting order of the names 2. "Edit contact" Names can be displayed in a different order. Editing a contact 1. "My contacts" 2. Open "Options". 3. "Display: last, first name" or "Display: first, last name" Depending on how the contacts are stored on the mobile phone, the sorting order of the names may differ from the selected sorting or‐ der. 3. Change the entries. Deleting contacts 4.
Communication Bluetooth mobile phone preparation package Bluetooth mobile phone preparation package Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. hands-free system instead.
Bluetooth mobile phone preparation package Notes At high temperatures, the charging function of the mobile phone may be limited and functions may not be executed. When using the mobile phone via the vehicle, note the operating instructions of the mobile phone. Communication tooth passkey. It is only required once for pairing. ▷ The radio ready state is switched on. Activating/deactivating Bluetooth Bluetooth is not permitted everywhere. Comply with all safety guidelines and regulations. 1.
Communication Bluetooth mobile phone preparation package Additional telephone A mobile phone can be used as an additional telephone. The additional telephone can be used to accept incoming calls, refer to page 197. While a call is active on the additional telephone, received calls are displayed on the Control Display. Office Contacts, appointments, tasks, notes, text mes‐ sages, and e-mails from the mobile phone are transferred to the vehicle. 4.
Bluetooth mobile phone preparation package If the pairing was successful, the mobile phone appears at the top of the list of mobile phones. Communication 3. Select the mobile phone that is to be con‐ nected. The functions supported by the mobile phone and audio device are displayed as symbols when paired. White symbol: the function is active. Gray symbol: the function is inactive. Symbol Function Telephone. Additional telephone. Audio source.
Communication Bluetooth mobile phone preparation package ▷ "Additional telephone" 3. Highlight the device that is to be unpaired. ▷ "Audio" 4. Open "Options". 7. "OK" 5. "Remove phone from list" If a function has already been assigned to an‐ other connected mobile phone, the function is deactivated in that mobile phone and the mo‐ bile phone is unpaired when the function is as‐ signed to a new mobile phone.
Bluetooth mobile phone preparation package The mobile phone no longer reacts. ▷ Switch the mobile phone off and on again. ▷ Is the ambient temperature too high or low? Do not expose the mobile phone to extreme environmental conditions. Communication Controls Adjusting the volume The telephone functions are not available. ▷ Is the mobile phone paired as an additional telephone and is the additional telephone function deactivated? Activate the function.
Communication Bluetooth mobile phone preparation package If more than one phone number is assigned to a contact, only the name of the contact is dis‐ played. 2. "End call" For calls on the additional telephone, the num‐ ber is only displayed if it is transmitted by the network. An incoming call to one of the telephones is au‐ tomatically rejected if there is an active call on the other telephone. Accepting a call Press the button on the steering wheel. or Entering a phone number Dialing a number 1.
Bluetooth mobile phone preparation package If a second call comes in during an ongoing call, a call waiting signal is sounded. 2. Communication "Conference call" "Accept" The call is accepted and the existing call is put on hold. Establishing a second call Establish an additional call during an active call. 1. "Telephone" 2. "Active calls" 3. "Hold" The existing call is put on hold. When terminating a conference call, both calls are ended.
Communication Bluetooth mobile phone preparation package swering machine. The DTMF code is needed for this purpose. Symbol Meaning 1. "Telephone" 2. Select the contact from a list or "Dial number". 3. Calling a contact Contact with one stored phone num‐ ber. Contact with more than one stored phone number. "Keypad dialing" Call not possible; mobile phone with‐ out reception or network. For contacts with one stored phone number: select the required contact. The connection is being established. 4.
Bluetooth mobile phone preparation package Communication Dialing a number on the onboard monitor those calls are displayed that were received in the vehicle. 1. "Telephone" The 20 telephone calls that were last received are displayed. The sorting order and display of the phone numbers depends on the particular mobile phone. 2. "Redial" 1. "Telephone" 2. "Received calls" 3. Select the desired entry and the phone number if necessary. The connection is established.
Communication Bluetooth mobile phone preparation package Snap-in adapter 3. To remove the snap-in adapter: press but‐ ton 1. General information More information on compatible snap-in adapters that support the functions of the mo‐ bile phone is available at the service center. Notes At high temperatures, the charging function of the mobile phone may be limited and functions may not be executed. When using the mobile phone via the vehicle, note the operating instructions of the mobile phone.
Bluetooth mobile phone preparation package Communication Removing the mobile phone Press the button and remove the mobile phone. Online Edition for Part no.
Communication Office Office Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Office Contacts Editing a contact At a glance 2. "Edit contact" Communication 1. Select the desired contact. Contacts can be created and edited. The con‐ tacts from the mobile phone are displayed as well if this function is supported by the mobile phone. The addresses can be adopted as desti‐ nations for navigation and the phone numbers can be dialed. Displaying contacts General information 1. "Office" 3. Change the entries. 4. "Store contact in vehicle" 2.
Communication Office tained in the vehicle. The address can be checked for this purpose. If necessary, "Accept address". 9. "Store contact in vehicle" 1. Select the desired contact and highlight the address. Contact types 2. Open "Options". Various contact types can be assigned to phone numbers and addresses. 3. "Check as destination" 4. Correct and store the address if necessary. If the address is corrected and stored, a copy of it is stored in the vehicle.
Office Communication Show contact pictures Displaying messages Pictures stored with the contacts are stored in the vehicle when the mobile phone is con‐ nected to the vehicle. The number of transmit‐ ted pictures depends on the mobile phone. The mobile phone must support this function. 1. "Office" 2. "Messages" A symbol identifies the type of message. Symbol Message type 1. "Office" Text messages. 2. "Contacts" E-mail from mobile phone. 3. Open "Options". 4.
Communication Office Reading the text message out loud Calendar Read the text message out loud, refer to page 210. Display the calendar E-mail Appointments during the last 20 days and the next 50 days can be displayed. Displaying e-mails 1. "Office" 1. "Office" 2. "Calendar" 2. "Messages" 3. Select the desired e-mail. Displaying e-mail contacts If the sender and recipient of an e-mail are transmitted by the mobile phone, this informa‐ tion is displayed in the e-mail.
Communication Office Reading the appointment out loud Reading the task out loud Read the appointment out loud, refer to page 210. Read the task out loud, refer to page 210. Notes Tasks Displaying the task list Display tasks that are due within the next 90 days. Displaying notes 1. "Office" 2. "Notes" All notes are displayed. 1. "Office" Displaying the note 2. "Tasks" 1. Select the desired note. Sorting the task list 1. Select the header in the task list. 2.
Communication Office Reminders Storing contact data Displaying reminders 2. Highlight the phone number or e-mail ad‐ dress. 1. Reminders of pending appointments and tasks are displayed. After an appointment or after a task is due, the reminder is no longer displayed. 1. "Office" "Use contact data" 3. Open "Options". 4. "Add to existing contact" or "Store as new contact" 2. "Reminders" 3. Select the desired reminder. The corresponding appointment or the task are displayed.
Office Communication ▷ The mobile phone is not capable of the missing function or is not connected cor‐ rectly. ▷ The Office function is deactivated. ▷ The mobile phone is connected as an addi‐ tional phone. ▷ Appointments are older than 20 days or are more than 50 days in the future. ▷ The tasks have been marked as completed or have a due date that lies more than 90 days in the future.
Communication MINI Connected MINI Connected Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Create the entries. Make entries only when traffic and road conditions allow.
MINI Connected Control Display and can be operated using the MINI joystick. The volume can be set using the following con‐ trols: ▷ Buttons on the steering Communication If necessary, restart the software applica‐ tion on the mobile phone after a phone conversation. ▷ Audio and video playback from the snap-in adapter is only possible if no cable is con‐ nected to the AV-IN port. wheel or ▷ Volume button on the radio, refer to page 160 1.
Communication MINI Connected Display. This changes the operating functions of the MINI joystick and the MINI buttons until the PlugIn is deactivated again. ▷ Press 2x: opens the main menu. The operation of the PlugIn depends on the iOS version in use, e.g., iOS 4.1. ▷ Press 1x and move the MINI joystick to the left 2x. Opens the main menu. Home button Via the audio source button Press the button to select the following functions: ▷ Press 1x: opens the display menu bar.
MINI Connected Online Edition for Part no.
Online Edition for Part no.
At a glance Controls Driving tips Navigation Entertainment Communication Mobility Reference Online Edition for Part no.
Mobility Refueling Refueling Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. 2. Turn the fuel cap counterclockwise. 3. Place the fuel cap in the bracket attached to the fuel filler flap.
Refueling MINI Coupe, MINI Roadster: 1. Remove the cover of the left cargo area side wall. Mobility Observe the following when refueling When refueling, insert the filler nozzle com‐ pletely into the filler pipe. Lifting up the fuel pump nozzle during refueling causes: ▷ Premature pump shutoff. ▷ Reduced efficiency in the fuel-vapor recov‐ ery system. The fuel tank is full when the filler nozzle clicks off the first time. 2. Pull the green knob with the gas pump symbol.
Mobility Fuel Fuel Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Recommended fuel quality The manufacturer of your MINI recommends: ▷ AKI 91. ▷ John Cooper Works AKI 93.
Fuel Online Edition for Part no.
Mobility Wheels and tires Wheels and tires Vehicle equipment tires are warm, the tire inflation pressure is higher. This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Mobility Wheels and tires column for traveling speeds up to 100 mph/ 160 km/h to achieve optimum driving comfort. this speed; otherwise, tire damage and acci‐ dents may occur.◀ These tire inflation pressures can also be found on the driver's side door pillar when the driver's door is open.
Mobility Wheels and tires Tire size Pressure specifications in bar/PSI Compact wheel: T 115/70 R 15 90 M Traveling speed up to 50 mph/80 km/h 4.2/60 More details on the permissible load and weights, refer to page 271. Tire inflation pressures for MINI Cooper S Coupe Tire size Pressure specifications in bar/PSI All pressure specifications in the table are indicated in bar/PSI with cold tires. Cold = ambient temperature 195/55 R 16 87 V RSC 2.6/38 2.6/38 2.8/41 2.8/41 2.7/39 2.7/39 2.9/42 2.
Mobility Wheels and tires Tire inflation pressures for MINI Cooper Roadster Tire size Pressure specifications in bar/PSI All pressure specifications in the table are indicated in bar/PSI with cold tires. Cold = ambient temperature 175/65 R 15 84 T M+S 2.4/35 2.4/35 2.6/38 2.
Mobility Wheels and tires Tire size Pressure specifications in bar/PSI 205/45 R 17 84 V M+S RSC 2.8/41 2.8/41 205/45 R 17 84 V M+S A/S RSC 205/45 R 17 84 V RSC 205/40 R 18 82 W RSC 175/60 R 16 82 H M+S RSC More details on the permissible load and weights, refer to page 271. Tire inflation pressures for MINI John Cooper Works Roadster Tire size Pressure specifications in bar/PSI All pressure specifications in the table are indicated in bar/PSI with cold tires.
Mobility Wheels and tires Tire size Pressure specifications in bar/PSI 175/65 R 15 84 T M+S Std 2.4/35 2.4/35 2.6/38 2.6/38 175/65 R 15 84 H Std 175/65 R 15 84 H M+S A/S Std 175/60 R 16 82 H M+S RSC 195/55 R 16 87 H RSC 195/55 R 16 87 H M+S RSC 195/55 R 16 87 V M+S A/S RSC 205/45 R 17 84 V RSC 205/45 R 17 84 V M+S RSC 205/45 R 17 84 V M+S A/S RSC 205/40 R 18 82 W RSC More details on the permissible load and weights, refer to page 272.
Mobility Wheels and tires Tire inflation pressures for MINI John Cooper Works Convertible Tire size Pressure specifications in bar/PSI Traveling speeds of up to 100 mph/160 km/h Traveling speeds above 100 mph/160 km/h 2.7/39 2.7/39 2.9/42 2.9/42 2.9/42 2.9/42 3.1/45 3.1/45 All pressure specifications in the table are indicated in bar/PSI with cold tires.
Wheels and tires Conform to Federal Safety Requirements All passenger car tires must conform to Federal Safety Requirements in addition to these grades.◀ Mobility cle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum re‐ quired by law.
Mobility Wheels and tires Minimum tread depth In case of tire damage If there are indications of tire damage, re‐ duce your speed immediately and have the wheels and tires checked right away; other‐ wise, there is the increased risk of an accident. Drive carefully to the next service center or tire shop. If necessary, have the vehicle towed. Wear indicators in the tread base are distrib‐ uted around the circumference of the tire and are marked on the tire sidewall with TWI, Tread Wear Indicator.
Wheels and tires Changing wheels and tires Mounting Information on mounting tires Have mounting and balancing performed only by a service center or tire specialist. If this work is not carried out properly, there is the danger of subsequent damage and related safety hazards.
Mobility Wheels and tires Maximum speed of winter tires If the maximum speed of the vehicle is higher than the permissible speed for the winter tires, then display a corresponding sign in the field of vision. You can obtain this sign from the tire specialist or from your service center. Run-flat tires Label Maximum speed for winter tires Do not exceed the maximum speed for the winter tires; otherwise, tire damage and ac‐ cidents can occur.
Wheels and tires Mobility ▷ If a warning triangle or portable hazard warning lamp is required, set it up on the roadside at an appropriate distance from the rear of the vehicle. Comply with all safety guidelines and regulations.◀ The procedure to correct a flat tire depends on the equipment in the vehicle: ▷ Run-flat tires, refer to page 232. ▷ MINI Mobility System, refer to page 233.
Mobility Wheels and tires 3. Insert the sealant bottle into the compres‐ sor housing in a vertical position. 4. Unscrew the dust cap off of the valve of the defective wheel and screw the filling hose 2 of the sealant bottle onto the valve. If the inflation pressure of 1.8 bar/26 psi is still not reached, the tire is too heavily damaged. Contact the nearest service center. Stowing the Mobility System 1. Unscrew the filling hose 2 of the sealant bottle from the wheel. 2.
Wheels and tires Do not allow the compressor to run too long Mobility rily deactivate DSC or activate DTC, refer to page 101. Do not allow the compressor to run longer than 10 minutes; otherwise, the device will overheat and may be damaged.◀ If the inflation pressure is not maintained, take the vehicle on another drive, distributing the sealant, refer to page 234. Then repeat steps 1 to 4 once. If the inflation pressure of 1.8 bar/26 psi is still not reached, the tire is too heavily damaged.
Mobility Engine compartment Engine compartment Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Engine compartment To avoid damage, make sure that the wiper arms are resting against the wind‐ shield before you open the engine compart‐ ment. Do not open the engine hood before the engine has cooled down; otherwise, injuries may result.◀ Mobility Closing the hood Unlocking and opening the hood 1. Pull the lever. Close the hood from a height of ap‐ prox. 16 in/40 cm with momentum. It must be clearly heard to engage.
Mobility Engine oil Engine oil Vehicle equipment The oil level must be between the two marks on the dip stick. This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Engine oil Too much engine oil Have the vehicle checked immediately; otherwise, surplus oil can lead to engine dam‐ age.◀ Protect children Keep oil, grease, etc., out of reach of chil‐ dren and heed the warnings on the containers to prevent health risks.◀ Mobility Gasoline engine API SM or a higher quality standard Oil change An oil change should be carried out by the serv‐ ice center only. Oil types for refilling Notes No oil additives Do not use oil additives as these may cause engine damage.
Mobility Coolant Coolant Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. 2.
Maintenance Mobility Maintenance Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Mobility Maintenance Socket for OBD Onboard Diagnosis Primary components in the vehicle emissions can be checked via the OBD socket using a de‐ vice. Emissions The warning lamps light up. The vehicle is producing higher emissions. You can continue your journey, but moderate your speed and exercise due caution. Have the vehicle checked as soon as possible. Under certain circumstances, one of the lamps flashes or lights up continuously.
Replacing components Mobility Replacing components Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Mobility Replacing components MINI Coupe, MINI Roadster: replacing the wiper blades 4. Slide the new wiper blade onto the wiper arm until it engages audibly. 1. Fold up and hold the wiper arm. 5. Fold down the wiper arm. 2. Squeeze the locking spring, arrows 1, and fold out the wiper blade, arrow 2. Risk of damage Before opening the hood, ensure that the wiper arms with wiper blades are folded onto the window; otherwise, damage may occur.◀ Lamp and bulb replace‐ ment Notes 3.
Replacing components Use a clean tissue, cloth or something similar, or hold the bulb by its base.◀ Caring for the headlamps, refer to page 260. For bulb replacement that is not described here, please contact the service center or a workshop that works according to the repair procedures of the manufacturer with corre‐ spondingly trained personnel. Mobility driving cautiously with the front fog lamps, pro‐ vided this is permitted by local laws.
Mobility Replacing components 3. Insert the new bulb and attach the cover in reverse order. Turn signal, parking lamp, roadside parking lamp, and front fog lamp Access to the bulbs via the wheel housing Follow the general instructions on lamps and bulbs, refer to page 244. To remove the cover: 1. Press the tab. 2. Fold away the cover and take it out of the holder. Proceed in reverse order to attach the cover.
Replacing components Mobility 4. Turn the bulb counterclockwise and re‐ move it. 4. Turn the lower bulb counterclockwise and remove it. 5. Insert the new bulb and attach the covers in reverse order. 5. Insert the new bulb and attach the cover in reverse order. Replacing the parking lamp bulb and roadside parking lamp bulb 5-watt bulb, W 5 W 5-watt bulb, W 5 W Lateral turn signals 1. Push the lamp forward with the air grille and remove it. 1. Turn the wheel. 2. Remove cover 2.
Mobility Replacing components MINI Convertible 1. Remove the cover of the cargo area side wall. Move the convertible top to the top posi‐ tion, refer to page 116, and take off the cover of the cargo area side wall. 1 Turn signal 2 Tail lamp LED 3 Brake lamp Replacing MINI Coupe, MINI Roadster 1. Remove the cover of the cargo area side wall. 2. Turn the corresponding bulb counterclock‐ wise, arrows 1, and remove. Another bulb is located behind the cargo area side wall, arrow 2. 2.
Replacing components Mobility License plate lamps 5-watt bulb, C 5 W 1. Push the lamp to the left in the catch of the lamp housing using the screwdriver, ar‐ row 1. 1. Squeeze the clips, arrows, and remove the bulb holder. 2. Pull off the bulb and replace it. 3. Insert the new bulb and bulb holder in re‐ verse order. 4. Re-engage the bulb holder so that it audi‐ bly clicks into place. 2. Take out the lamp, arrow 2. John Cooper Works: aerodynamic bumper 4. Insert the lamp.
Mobility Replacing components ▷ Mount the compact wheel, refer to page 251. 6. Lower the compact wheel with the lifting handle. ▷ Tighten the lug bolts, refer to page 252. ▷ Drive with the compact wheel, refer to page 250. Removing the compact wheel The screw fitting of the compact wheel is lo‐ cated in the cargo area under the floor mat, on the floor of the storage compartment holding the wheel change set. 1. Release the screw fitting with the special wrench. 2. Take out the cover. 3.
Replacing components reduced track stability on braking, extended braking distance, and altered self-steering characteristics in the limit range. In conjunction with winter tires, these characteristics are more pronounced.◀ Mobility Jacking up vehicle Only mount one compact wheel Only one compact wheel may be mounted. Restore the wheels and tires to their original size as quickly as possible. Failure to do so is a safety risk.
Mobility Replacing components 3. Mount the new wheel. 4. Screw in at least two bolts crosswise. 5. Screw in the remaining lug bolts. 6. Fully tighten all lug bolts in a diagonal pat‐ tern. 7. Lower the vehicle. tions and that any associated Check Control messages are no longer displayed. Charging the battery Note Do not connect the charger to the socket 8. Remove the jack. Retightening the lug bolts Retighten the lug bolts diagonally.
Replacing components Lights up yellow: the battery charge level is very low, the battery is old, or it is not securely connected. Mobility In interior Charge the battery by taking a long drive or us‐ ing an external charger. If the indicators appear again, have the battery checked as soon as possible. Disposing of old batteries Have used batteries disposed of by the service center after they are replaced or take them to a recycling center.
Mobility Breakdown assistance Breakdown assistance Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Hazard warning flash‐ ers The first aid kit is located in the left side trim on the cargo area floor.
Breakdown assistance Preparation Mobility Connecting jumper cables 1. Check whether the battery of the other ve‐ hicle has a voltage of 12 volts and approxi‐ mately the same capacitance in Ah. This in‐ formation can be found on the battery. 2. Switch off the engine of the assisting vehi‐ cle. 3. Switch off any electronic systems/power consumers in both vehicles. Connecting order Connect the jumper cables in the correct order; otherwise, there is the danger of injury from sparking.◀ 1.
Mobility Breakdown assistance the battery, or to the engine or body ground of the vehicle to be started. Body ground: Using a tow fitting The screw-in tow fitting must always be carried in the vehicle. It can be screwed in at the front or rear of the MINI. Tow fitting, information on use ▷ Use only the tow fitting provided with the vehicle and screw it all the way in. ▷ Use the tow fitting for towing on paved roads only. ▷ Avoid lateral loading of the tow fitting, e.g.
Breakdown assistance Mobility Towing with a tow bar Light towing vehicle The towing vehicle must not be lighter than your vehicle, or it will not be possible to control vehicle response.◀ Correctly attach the tow bar Only secure the tow bar on the tow fit‐ tings; damage can occur when it is secured on other parts of the vehicle.◀ Being towed Follow the towing instructions Follow all towing instructions, or vehicle damage or accidents may occur.
Mobility Breakdown assistance Towing with a tow truck Have the MINI transported with a tow truck with a so-called lift bar or on a flat bed. Do not lift the vehicle Do not lift the vehicle by the tow fitting or body and chassis parts; otherwise, damage may result.◀ Tow-starting If possible, do not tow-start the vehicle but start the engine by jump-starting, refer to page 254.
Care Mobility Care Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Mobility Care Automatic transmission Before driving into the car wash, note the fol‐ lowing to ensure that the vehicle can roll: 1. Insert the remote control into the ignition lock, even with Comfort Access. 2. Move the selector lever to position N. 3. Release the handbrake. 4. Switch the engine off. 5. Leave the remote control in the ignition lock so that the vehicle can roll. Hand car wash If washing the vehicle by hand, use copious quantities of water and car shampoo if neces‐ sary.
Care frozen; otherwise, water marks, fabric stains, and chafing may occur. ▷ If water marks nevertheless occur on the headliner, these can be removed using a microfiber cloth and interior cleaner. Mobility the frequency and extent of your car care to these influences. Immediately remove especially aggressive sub‐ stances, such as spilled fuel, oil, grease, or bird droppings, to prevent damage to the paint‐ work.
Mobility Care combination with a suitable interior cleaner. Follow the instructions on the container. Clean the upholstery material down to the seams using large sweeping motions. Avoid rubbing the material vigorously. Damage from Velcro® fasteners Open Velcro® fasteners on pants or other articles of clothing can damage the seat covers. Ensure that any Velcro® fasteners are closed.
Care Mobility Ensure that the floor mats are securely fastened again when they are returned after being re‐ moved, such as for cleaning.◀ Floor mats can be removed for cleaning. If they are very dirty, clean with a microfiber cloth and water or an interior cleaner. To pre‐ vent matting of the carpet, rub back and forth in the direction of travel only. Displays To clean the displays, such as the radio or dis‐ play elements, use an antistatic microfiber cloth.
Online Edition for Part no.
At a glance Controls Driving tips Navigation Entertainment Communication Mobility Reference Online Edition for Part no.
Reference Technical data Technical data Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Engine specifications Displacement cu in/cm³ No. of cylinders Cooper Cooper S John Cooper Works 97.
Technical data Reference Dimensions MINI Coupe Cooper Cooper S John Cooper Works 1 Vehicle height without roof an‐ tenna 54.3/1,378 54.5/1,384 54.5/1,385 2 Track width, front 57.4/1,459 57.2/1,453 57.2/1,453 3 Vehicle width with exterior mir‐ rors 74.5/1,892 74.5/1,892 74.5/1,892 4 Track width, rear 57.8/1,467 57.5/1,461 57.5/1,461 Online Edition for Part no.
Reference Technical data Cooper Cooper S John Cooper Works 5 Vehicle width without exterior mirrors 66.3/1,683 66.3/1,683 66.3/1,683 6 Wheelbase 97.1/2,467 97.1/2,467 97.1/2,467 7 Vehicle length 146.8/3,728 147/3,734 148/3,758 All dimensions in in/mm. Smallest turning radius dia.: 35 ft 10 in/10.7 m. MINI Roadster 268 Online Edition for Part no.
Technical data Reference Cooper Cooper S John Cooper Works 1 Vehicle height without roof an‐ tenna 54.5/1,384 54.7/1,390 54.8/1,391 2 Track width, front 57.4/1,459 57.2/1,453 57.2/1,453 3 Vehicle width with exterior mir‐ rors 74.5/1,892 74.5/1,892 74.5/1,892 4 Track width, rear 57.8/1,467 57.5/1,461 57.5/1,461 5 Vehicle width without exterior mirrors 66.3/1,683 66.3/1,683 66.3/1,683 6 Wheelbase 97.1/2,467 97.1/2,467 97.1/2,467 7 Vehicle length 146.
Reference Technical data MINI Convertible Cooper Cooper S John Cooper Works 1 Vehicle height without roof an‐ tenna 55.7/1,414 55.7/1,414 55.7/1,414 2 Track width, front 57.4/1,459 57.2/1,453 57.2/1,453 3 Vehicle width with exterior mir‐ rors 75.3/1,913 75.3/1,913 75.3/1,913 4 Track width, rear 57.8/1,467 57.5/1,461 57.5/1,461 5 Vehicle width without exterior mirrors 66.3/1,683 66.3/1,683 66.3/1,683 6 Wheelbase 97.1/2,467 97.1/2,467 97.
Technical data 7 Vehicle length Reference Cooper Cooper S John Cooper Works 146.6/3,723 146.8/3,729 148/3,758 All dimensions in in/mm. Smallest turning radius dia.: 35 ft 10 in/10.7 m. Weights Never exceed either the approved axle loads or the gross vehicle weight.
Reference Technical data Cooper Cooper S John Cooper Works Approved front axle load Manual transmission lbs/kg 1,786/810 1,896/860 1,907/865 Automatic transmission lbs/kg 1,863/845 1,951/885 1,962/890 Approved rear axle load lbs/kg 1,488/675 1,466/665 1,488/675 Cargo area capacity cu ft/ liter 8.5/240 8.5/240 8.
Reference Technical data Capacities Notes Fuel tank US gal/liters Approx. 13.2/50 Including reserve of US gal/liters Approx. 2.1/8 Window washer system US qt/liters Approx. 4.8/4.5 Fuel quality, refer to page 220 Details, refer to page 69 With headlamp washer sys‐ tem Online Edition for Part no.
Reference Short commands for voice activation system Short commands for voice activation system Vehicle equipment To have the available spoken instructions read out loud: ›Voice commands‹ This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Short commands for voice activation system Reference Vehicle information Computer Function Command Open the computer. ›Onboard info‹ Open the trip computer. ›Trip computer‹ Vehicle Function Command Open the vehicle information. ›Vehicle info‹ Open the vehicle status. ›Vehicle status‹ Navigation General information Function Command Navigation menu. ›Navigation‹ Open the destination entry. ›Enter address‹ Enter the address. ›Enter address‹ Enter the town/city. ›City‹ Enter the country.
Reference Short commands for voice activation system Function Command Switch off the spoken instruction. ›Switch off voice instructions‹ Display the address book. ›Address book‹ Display the most recent destinations. ›Last destinations‹ Open the traffic bulletins. ›Traffic Info‹ Special destinations. ›Points of interest‹ Map Function Command Display the map. ›Map‹ Map facing north. ›Map facing north‹ Map facing the direction of travel. ›Map in direction of travel‹ Perspective map.
Short commands for voice activation system Reference Radio FM Function Command Open a frequency. ›Frequency ... megahertz‹ e.g., 93.5 megahertz or frequency 93.5 Open the radio. ›Radio‹ Open the FM stations. ›F M‹ Open the manual search. ›Manual‹ Select a frequency range. ›Select frequency‹ Open a station. ›Select station‹ AM Function Command Open a frequency. ›Frequency ... Kilohertz‹ e.g., fre‐ quency 753 or 753 kilohertz Open the AM stations. ›A M‹ Open the manual search.
Reference Short commands for voice activation system CD/multimedia CD drive Function Command Select a track. ›Track ...‹ e.g., track 5 or ›C D track ...‹ e. g., CD track 5 Play back a CD. ›C D on‹ Select a CD. ›Select C D‹ Select a CD and track. ›C D ... track ...‹ e.g., CD 3 track 5 Open the CD and Multimedia menu. ›C D and multimedia‹ CD. ›C D‹ External devices Function Command Open the external devices. ›External devices‹ Open the Bluetooth devices.
Short commands for voice activation system Function Command List of messages. ›Messages‹ Open the Bluetooth devices. ›Bluetooth‹ Reference Office Function Command Open the Office menu. ›Office‹ Display Office Today. ›Current office‹ Display the contacts. ›Contacts‹ Display the messages. ›Messages‹ Display the calendar. ›Calendar‹ Display the tasks. ›Tasks‹ Display the reminders. ›Reminders‹ Contacts Function Command Select a name. ›Choose name‹ My contacts.
Reference Everything from A to Z Everything from A to Z Index A ABS, Antilock Brake Sys‐ tem 101 Acoustic signal, refer to Check Control 82 Activated charcoal filter with automatic climate con‐ trol 112 Adaptive Light Control 87 Additional telephone 192 Additives, engine oil 239 Airbags 90 Airbags, indicator/warning light 92 Air circulation, refer to Recir‐ culated air mode 109, 111 Air conditioner 108 Air conditioning 108 Air conditioning mode – Air conditioner 108 – Automatic climate con‐ trol 110 Air d
Reference Everything from A to Z Brake force distribution, elec‐ tronic 101 Brake pads, breaking in 124 Brakes – Handbrake 66 Brakes, MINI maintenance system 241 Brakes, service require‐ ments 81 Brake system, MINI mainte‐ nance system 241 Braking, notes 126 Breakdown assistance, Road‐ side Assistance 254 Breaking in 124 Brightness on the Control Dis‐ play 80 Button for starting the engine, refer to Start/Stop button 64 C Calendar 208 California Proposition 65 Warning 7 Car battery, refer to Vehicle batt
Reference Everything from A to Z Cooling function, switching on and off 112 Cooling, maximum 111 Cornering Brake Control, CBC 101 Corrosion on brake discs 126 Cradle for telephone or mobile phone, refer to Snap-in adapter 202 Cruise control 105 Cupholders 114 Current fuel consumption 76 Current location, storing 140 Curve lights, refer to Adaptive Light Control 87 Cylinders, number of, refer to Engine data 266 D Dashboard lighting, refer to Instrument lighting 88 Dashboard, refer to Cock‐ pit 12 Dashboar
Reference Everything from A to Z Engine oil, filling capacity 273 Engine oil, MINI maintenance system 241 Engine oil types, alterna‐ tive 239 Engine oil types, ap‐ proved 239 Engine, overheating, refer to Coolant temperature 75 Engine power, refer to Engine data 266 Engine, RPM 266 Engine start, assistance 254 Engine, starting 65 Engine, starting – Comfort Access 37 Engine, starting, Start/Stop button 64 Engine, stopping, Start/Stop button 64 Engine, switching off 66 ESP Electronic Stability Pro‐ gram, re
Reference Everything from A to Z H Halogen headlamps, bulb re‐ placement 245 Hand car wash, care 260 Hands-free microphone 16 Hazard warning system 16 HD Radio 161 Head airbags 90 Headlamp control, auto‐ matic 85 Headlamp courtesy delay fea‐ ture 86 Headlamp flasher 67, 86 Headlamp flasher, indicator lamp 15 Headlamps 85 Headlamps, care 260 Headlamps, cleaning, washer fluid 69 Head restraints 56 Head restraints – Adjusting the height 56 – Removing 56 Heatable – Windshield 112 Heating – Rear window 109, 11
Reference Everything from A to Z Lamp, replacing, refer to Lamp and bulb replace‐ ment 244 Lamps 85 Lamps, automatic headlamp control 85 Lamps, parking lamps/low beams 85 Language, changing on the Control Display 80 Lap-and-shoulder belt, refer to Safety belts 55 LATCH child restraint fixing system 61 Leather, care 261 Leather care 261 LEDs, light-emitting di‐ odes 245 Letters and numbers, enter‐ ing 22 License plate lamp, bulb re‐ placement 247 Light-alloy wheels, care 262 Light-emitting diodes, LEDs 245
Reference Everything from A to Z Mobile phone, refer to Tele‐ phone 182, 192 Mobility System 233 Modifications, technical, refer to Safety 7 Monitor, see Control Dis‐ play 18 Mounting of child restraint fix‐ ing systems 59 MP3 player 171 N Navigation 136 Navigation data 136 Navigation data, updat‐ ing 136 Navigation system – Destination entry by voice 144 Neck restraints, refer to Head restraints 56 New wheels and tires 231 Notes 6, 209 Nozzles, refer to Ventila‐ tion 113 O OBD Onboard Diagnos‐ tics 242
Reference Everything from A to Z Rear fog lamps, indicator lamp 15 Rear lamps, refer to Tail lamps 247 Rear spoiler 103 Rearview mirror, refer to Mir‐ rors 57 Rear window de‐ froster 109, 112 Recirculated air mode 109, 111 Recommended tire brands 231 Redialing 188, 200 Releasing, refer to Unlock‐ ing 38 Remaining range for service, refer to Service require‐ ments 81 Remaining range, refer to Range 76 Reminders 210 Remote control – Battery replacement 39 – Comfort Access 37 – Malfunctions 33, 39 – Tailgate
Reference Everything from A to Z Short commands, voice acti‐ vation 274 Side airbags 90 Side windows, refer to Win‐ dows 41 Slot for remote control 64 Snap-in adapter, mobile phone 202 Socket, OBD Onboard Diagno‐ sis 242 Software applications, iPhone 212 Software part num‐ ber 182, 192 Software update 178 Special destinations, naviga‐ tion 142 Special equipment, series equipment 6 Speed, average 76 Speed limit 99 Speed limit – Setting 99 Speedometer 14 Speed, with winter tires 232 Spoken instructions, nav
Reference Everything from A to Z Torque, refer to Engine data 266 Towing another vehicle 256 Towing, being towed 256 Town/city, navigation 138 Tow-starting 256 TPM, refer to Tire Pressure Monitor 95 Traction control 102 Traffic bulletins, naviga‐ tion 151 Transmission – Overriding selector lever lock in case of automatic transmission with Step‐ tronic 72 Transmission lock – Refer to Changing selector lever positions 71 Transmission, manual 70 Transporting children safely 59 Treble, tone 158 Trip-distance
Reference Everything from A to Z Windshield wiper, refer to Washer/wiper system 67 Winter storage, care 263 Winter tires 231 Winter tires – Setting the speed limit 99 Winter tires, tread 229 Wiper blades, care 260 Wiper blades, changing 243 Wiper fluid 69 Word match concept, naviga‐ tion 23 Y Your individual vehicle – Settings, refer to Personal Profile 31 290 Online Edition for Part no.
01 40 2 919 017 ue *BL291901700V* DRIVE ME. Online Edition for Part no.
