Owner`s manual

7
Install Manual P/N 01 29 0 309 308
PAIRING PROCEDURE:
Pairing is needed for phone recognition and to prevent other mobile phones from establishing an
unwanted wireless connection.
Mobile phones that are not paired will not operate with the system.
Pairing only needs to be done once for a mobile phone unless the device is deleted from the system's
memory.
The MINI Hands-Free System searches first for the most recently paired phone stored in memory.
The first mobile phone found will be connected to the system. Once this connection is established no
other phone can be connected. Only one of five paired phones can be wirelessly connected to the
system at a time
IMPORTANT: Prior to starting the pairing procedure the Bluetooth Wireless Technology feature of
your phone must be activated. This feature will enable your phone to discover or be discovered by
other devices that utilize Bluetooth Wireless Technology. If the feature is not activated the pairing
procedure cannot be completed.
The methods of enabling this feature will vary for each model phone being utilized please refer to the
owner’s manual of the phone being connected to the system for specific instructions on activating the
Bluetooth feature/operation mode.
Pairing Procedure and Pass code
To pair a mobile phone enabled with Bluetooth
®
wireless technology to the hands-free system
installed in your vehicle, turn on the vehicle's ignition, wait for the controller LED light to blink once,
have your mobile phone pairing procedure available and follow these steps:
1. Prior to starting the pairing procedure the Bluetooth Wireless Technology feature of your phone
must be activated. This feature will enable your phone to discover or be discovered by other
devices that utilize Bluetooth Wireless Technology. If the feature is not activated the pairing
procedure cannot be completed.
IMPORTANT: The methods of enabling this feature will vary for each model phone being utilized,
please refer to the owner’s manual of the phone being connected to the system for specific
instructions on activating the Bluetooth feature/operation mode.
2. On controller press Send/Receive, wait for the beep and say, "SETUP"
3. System Response:
"SELECT ONE OF THE FOLLOWING: PHONE PAIRING, CONFIRMATION PROMPTS OR
LANGUAGE" audible beep
4. Say “PHONE PAIRING"
5. System Response:
”PLEASE, SELECT ONE OF THE FOLLOWING: PAIR OR DELETE THE CURRENT PHONE"
audible beep
6. Say "PAIR"
7. System Response:
"PLEASE, PAIR PHONE AS MENTIONED IN PHONE MANUAL"
8. The MINI Hands-Free System with Bluetooth
®
Wireless Technology will search for approximately
two minutes for another device with the Bluetooth feature enabled and it’s discover mode
activated.
9. To complete the pairing procedure, the mobile phone must be placed into the correct
search/discover mode in order to be recognized by the hands-free system. Refer to the user’s
guide of the phone being paired for instructions on activating the Bluetooth
connection/search/discover feature.