Owner`s manual

8
Install Manual P/N 01 29 0 309 308
IMPORTANT: Pairing will only be successful if the Bluetooth feature of the mobile phone is
activated and the phone is placed into the correct search mode in order to locate other devices
that utilize Bluetooth
®
wireless technology.
10. As a connection is established between the phone and the Hands-free system, most mobile
phones will display a message like:
“searching”
Followed by "Mini HF" once the MINI Hands-Free System with Bluetooth® Wireless Technology is
detected.
11. Press the YES/SEND key on the phone to accept "Mini HF"
12. Press YES/SEND key on the phone once more to accept "add to paired".
13. Enter the requested password/pass code - 0000 using phone keypad
14. On phone press YES/SEND key to accept the entered passcode.
15. The mobile phone will display "Mini HF pairing" to indicate the procedure is being completed.
16. The last step is modifying and/or accepting the "Mini HF" nametag given to the system. Once the
YES/SEND key is pressed, pairing will be finalized.
17. Successful pairing is indicated by the prompt "PAIRING COMPLETED".
18. Approximately 15 seconds after the prompt, the LED light will stay on indicating an active mobile
phone connection.
To stop or cancel a pairing procedure that has been initiated, press Send/Receive. The procedure
will be cancelled and the system will exit.
TROUBLESHOOTING
Symptom Possible solution
Blown Radio fuse in fuse panel
Incorrect wiring to control module from radio harness
No Power to Controller or
Controller does not illuminate with Key-on
Controller not connected to Control Module
Radio does not Mute when Hook/Unhook
button is pressed on controller
Incorrect wiring between control module and radio
12-pin audio connector not connected in rear of
radio
No audio from speakers
Incorrect harness for H/K audio-equipped vehicle
Microphone not connected to phone harness System does not respond to voice Commands
Damaged wiring between control module and
microphone