Technical data

Recycling:

Dispose of drawn-off refrigerant oil as hazardous waste.

Observe country-specific waste-disposal regulations.

Instructions For Evacuating Off A/C System:

The evacuation procedure removes all traces of ambient air, water vapor and any other gases present from the

A/C system.

This enables subsequent system filling with refrigerant.

A decrease in the vacuum level indicates a leak in the refrigerant circuit. Refer to 64 50 ... LEAK-TESTING

WITH LEAK TESTER DEVICE.

Instructions For Filling A/C System:

Before filling with refrigerant, top up the refrigerant oil entrained during drawing off.

Depending on the type of component replaced on the A/C system, it may be necessary to top up the refrigerant

oil, even if no measurable losses have occurred during drawing off.

Read and comply with the A/C system manufacturer's notes in this regard and the operating instructions of the

relevant service station.

Information on the required refrigerant fill quantity for the entire A/C system is contained on the rating plate (1)

in the engine compartment.

If necessary, refer to HEATING AND AIR CONDITIONING - TECHNICAL DATA - COOPER (1.6L)

R50/W10 for fill quantities.

Installation:

Reseal refri

erant filler necks on vehicle with sealin

caps.

2006 MINI Cooper

2002-05 HVAC Air Conditioning & Heating Systems - Repair Instructions - Cooper (1.6L) R50/W10 & Cooper S

Microsoft