5041050/3 IM-P504-04 CH Issue 3 ML3M Monnier Miniature Compressed Air Lubricator Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation and commissioning 4. Operation 5.
1. Safety information Safe operation of these products can only be guaranteed if they are properly installed, commissioned, used and maintained by qualified personnel (see Section 1.11) in compliance with the operating instructions. General installation and safety instructions for pipeline and plant construction, as well as the proper use of tools and safety equipment must also be complied with. 1.
1.6 The system Consider the effect on the complete system of the work proposed. Will any proposed action (e.g. closing isolation valves, electrical isolation) put any other part of the system or any personnel at risk? Dangers might include isolation of vents or protective devices or the rendering ineffective of controls or alarms. Ensure isolation valves are turned on and off in a gradual way to avoid system shocks. 1.
1.14 Freezing Provision must be made to protect products which are not self-draining against frost damage in environments where they may be exposed to temperatures below freezing point. 1.15 Disposal Unless otherwise stated in the Installation and Maintenance Instructions, this product is recyclable and no ecological hazard is anticipated with its disposal providing due care is taken. 1.
2. General product information 2.1 General description The MF2M Monnier miniature compressed air filter provides high quality compressed air for general purpose pneumatic applications. Principal features: - Once set compensates for varying air flowrates. Easy setting of oil / air ratio: approximately 5% of each oil drop enters the air stream. Tamper-proof feature; prevents unauthorised adjustment. Non-return valve in oil pick up system ensures lubrication for short air flows. Polycarbonate bowl.
3. Installation and commissioning Note: Before actioning any installation observe the 'Safety information' in Section 1. Referring to the Installation and Maintenance Instructions, name-plate and Technical Information Sheet, check that the product is suitable for the intended installation. 3.1 Specific product safety information Polycarbonate bowls may be attacked by phosphate ester based fluids, solvents, chemical cleaners, carbon tetrachloride, etc.
3.3 Installation 3.3.1 The unit should be fitted in horizontal pipework with the bowl vertically downwards. 3.3.2 Adequate space should be provided around the unit to allow easy access for routine servicing requirements (see Figure 2 for withdrawal distances). 3.3.3 Connect the unit so that the airflow is in the direction indicated by the arrow on the body. 3.3.4 The unit should be installed as close as possible to the equipment it is serving. 3.3.
4. Operation 4.1 Principle of operation Insert tamper-proof " diameter ball as indicated Monnier lubricators are used to maintain the proper ratio of oil and air and to maximize the performance and guarantee long life of pneumatic machinery. Once the oil rate has been set, a Monnier lubricator provides reliable automatic lubrication. The Monnier design ensures efficient and dependable performance. The Monnier Venturi valve (1) automatic ally maint ains the ratio of oil to air that the user selects.
4.
5. Spare parts and maintenance 5.1 Spare parts The spare parts available are detailed below. No other parts are supplied as spares. Available spares Bowl assembly Sight dome assembly Bowl guard assembly (optional extra) Note: In the interests of safety Spirax Sarco recommend that a bowl guard (an optional extra) should be fitted to polycarbonate bowls. How to order spares Always order spares by using the desciption given in the column headed 'Available spares' and state the size and type of unit.
IM-P504-04 CH Issue 3 11
IM-P504-04 CH Issue 3
