Instruction manual

II. BUILDING THE LEFT MAIN FRAME

Bags Required: #2A, #2B, and #3D

Tools or Materials Required:

M2.5 Allen Tool

M5.5 (7/32@) flat wrench

M7.0 (9/32”) flat wrench

Assemble the Left Main Frame

Parts Required: Bag #

1 #0064 M3 x 8 Button Head Socket Head Bolt 2B

2 #0009 M3 Washer 2B

2 #0019 M3 Locknut 2B

3 #0060-1 M3x6 Socket Head Bolt 2B

7 #0061 M3x8 Socket Head Bolt 2B

4 #0063 M3x10 Socket Head Bolt 2B

1 #0089 M3x10 Hex Bolt 2B

1 #0169 Bell Crank Pivot Stud 2B

1 #120-44 CNC Machined Anti-rotation Guide 2B

1 #115-10 Vertical Rear Channel w/Bearing 2A

1 #115-12 Vertical Front Channel 2A

1 #115-18 Lower Main Shaft Bearing Block 2B

4 #115-20 Frame Spacers 2B

1 #120-8 Main Shaft / T/R Drive Block Assembly 2B

1 #120-12 Upper Main Shaft Bearing Block 2B

1 #123-28 G-10 Left Main Frame 2A

1 #122-27 Rear Canopy Hex Spacer Mount 2B

1 #120-10 Main Shaft 3D

Refer to Drawing #2A

A. Select the #123-28 G-10 Left Main Frame, one #115-10 Vertical Rear Channel, one #122-27 Hex Spacer, one

#0089 M3 x 10 Hex Bolt, one #0061 M3 x 8 Socket Head Bolt, and one #0019 M3 Locknut. Orient the Left

Main Frame and the Rear Vertical Channel as shown. Install the required hardware. Use Blue Loctite on the

#0089 Hex Bolt. Tighten securely.

B. Select one #0169 Bell Crank Pivot Stud and one #115-20 Frame Spacer. Note: The position for the Bell

Crank Pivot Stud is on the outside of the main frame. Install both components. Tighten securely using Blue

Loctite.

C. Select the #120-44 CNC Machined Aluminum Swashplate Anti-rotation Guide and install the swash plate

guide assembly onto the Left Main Frame using two #0060-1 M3 x 6 Socket Head Bolts and two #0009 M3

Washers, align in a vertical position and tighten securely. Use Blue Loctite.