Instruction manual

Step 2: Canopy Finishing Suggestions

At your option, the canopy can be used in the Awhite@ form provided or painted to your choice. If overall painting is

chosen, these instructions assume you have the necessary experience and materials therefore only the steps required to

finish the canopy in Awhite@ are described below. Note: If you are changing the color, be aware that the decals are best

applied only over white or very light colors.

NOTE

: Refer to Table 3: Finishing Methods and Procedures. After choosing your finishing methods, please consider

the following list of optional materials:

3M Scotch brite pad or fine steel wool and :@ masking tape

Strong detergent

Masking paper or newspaper

Alcohol or paint prep solvent (such as Dupont #3919 prep-sol)

ATack@ cloth

Paint selection - Paint must be chosen to be fuel proof or compatible with fuel proof clear-coat. Automotive poly-

urethanes are best but modeler=s epoxy or urethane can also be used. Always apply a light coat first, allowing 15-30

minutes set-up time, before final gloss coats.