User guide

USER GUIDE
8
2. Connect the other end of the KVM cable to the KVM ports of the Target Server
/ KVM switch.
3. Connect a Network cable to the IP Control LAN port and to an Ethernet port on
your Network switch.
4. Connect the power adapter.
Figure 7 and Figure 8 illustrate the connections to a computer and KVM switch
respectively, with the optional KVM console.
SD
P110
KVM cable
Target PC
MINICOM
IP CONTROL
KVM In
Serial 3.3V/2A
LAN
MINICOM
User over IP
Internet / WAN / LAN
Figure 7 IP Control connections to a computer