Installation guide

PHANTOM MX IP
11. The MX IP rear panel ports
The figure below illustrates the ports on the MX IP.
www.minicom.com
POWER
85-265VAC 50/60 Hz
COMPUTER
SYSTEM2
nd
USER OUT IN SERVICE
RST
SERIAL 3
Power connector
Video In
Mouse
In port
Keyboard
In port
RS232
Terminal
port
Service
RS232
port
System
Out port
System
In port
2
nd
User port
}
For optional
local computer
Ethernet
ETHERNET
Keyboard
Out
Mouse
Out
Video Out
USER
}
For optional
KVM console
Serial 1
SERIAL 1
Serial 2
SERIAL 2
Figure 10 MX IP ports
You can work locally on the host system by connecting a KVM console to MX IP
rear panel.
Serial 1 port
Serial 1 port is used as follows:
• IPMI Version 1.5 connection to the remote system using the IPMI Option
cable
• Serial output for modem dial in connection
• Serial pass-through via Telnet
• Initial configuration
Serial 2 port
The Serial 2 port supports the internal and external power options
Ethernet
Connects the MX IP to an Ethernet network.
Reset (RST)
The Reset button resets the MX IP.
9