User manual

miniDSP Ltd – Hong Kong / Email :
[e-mail] / Features and Specifications are subject to change without prior notice
P 15
4.3.6 Master volume control
The master volume allows control of all 10 outputs channels (Analog + digital) of the miniDSP unit. It is enabled when a 10k linear
potentiometer is connected to the ADC input port. See the connectivity section for more information.
WARNING: Make sure to “DISABLE” the master volume control if you do not have any potentiometer connected to your unit. Doing
otherwise will make the platform unstable (volume very low).
4.4 Load/Save/Restore a configuration
4.4.1 Load configuration:
Use this feature to load a previously saved configuration. The file must be as .xml format and previously saved from this plug-in. For
complexity reasons, inter-plug-in compatibility is not available.
4.4.2 Save configuration
Use this feature to save your audio settings configuration. The following dialog box allows you to save the file anywhere on your PC as
a .xml format. All 4 memory preset configurations will be saved.
4.4.3 Restore Factory default
Use this feature to restore the board back to factory default. Warning that all configurations will be restored back to default from this
action.
4.4.4 Restore Factory default
Use this feature to restore the board back to factory default. Warning that settings of all four configurations will be blanked back to
default.
4.5 Firmware upgrade
In order to enable some new features, the miniDSP may require to be flashed with a new firmware. All the required tools
and firmware files are already included in the in the installation folder of the latest plug-in starting from 4x10 b5 release.
So the first step to make sure you have everything you need is to install the new plug-in by logging to the UserDownload
section. Note that firmware upgrade tools is Windows only at this point of time. A mac tool is in the works.s
A warning may be shown during a synchronization if you have the incorrect firmware loaded on your platform.
EQ band selection
Per Band
bypass EQ
Select the
filter type