User manual

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fications subject to change wi thout pri or noti ce 10
1.3 DDRC-88A / DIRAC LIVE® CONFIGURATION STEPS
The steps for configuring the DDRC-88A audio processor with Dirac Live® are summarized as follows:
1. Connect the DDRC-88A audio processor into your system and
install software. See Section 2, Installation and Setup.
2. Run a series of acoustic measurements using the Dirac Live
Calibration Tool For miniDSP program, to capture the acoustic
behavior of your speakers and room. See Section 3, Acoustic
Measurement.
3. Generate digital room correction filters that will be executed by the
DDRC-88A processor. Up to four filter sets can be downloaded into
the processor for easy real-time recall and auditioning. See Section
4, Filter Design.
4. Once the digital room correction filters are designed and
downloaded, the computer can be disconnected for normal
listening. See Section 5, Using the DDRC-88A audio processor.