User manual

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fications subject to change wi thout pri or noti ce 19
3.3.1 Sound System tab
On the Sound System tab, set the following parameters.
Choose system configuration
Use the dropdown menu to select your system configuration.
For multi-channel surround-sound, use 5.1 Speaker System or 7.1 Speaker System if it is desired
that Dirac Live calibrate for a 10 dB “LFE alignment gain” to the subwoofer channel. If the
calibration for LFE alignment gain is not required (that is, external equipment is providing this
gain) or if a different speaker configuration is required, use Custom System. (See Custom System
configuration below for further information.)
Test signal playback device
Preset to DDRC-88 (miniDSP Ltd). This will ensure that test signals are sent into your audio
system via the DDRC-88A processor.
If the entry for DDRC-88 is not showing, check that your DDRC-88A processor is connected via
USB and powered on, click the Rescan button, and then use the drop-down menu to select
DDRC-88.
Once you have verified that this tab is correct, click the Proceed button.