User manual

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fi cations subject to change without prior noti ce 10
1.3 CONFIGURATION OVERVIEW
The steps for configuring the nanoAVR DL HDMI audio processor with Dirac Live® to optimize your home theater
system is summarized as follows:
1. Connect the nanoAVR DL audio processor into your system and
install software. See Section 2, Installation and Setup.
2. Execute a series of acoustic measurements on your computer using
the Dirac Live Calibration Tool For miniDSP program, to capture
the acoustic behavior of your speakers and room. See Section 3,
Acoustic Measurement.
3. Generate the digital room correction filters that will be executed
by the processor. Up to four filter sets can be downloaded into the
processor for easy real-time recall and auditioning. See Section 4,
Filter Design.
4. Once the digital room correction filters are designed and
downloaded, the computer can be disconnected, as computer
connectivity is not required for normal listening and operation. See
Section 5, Using the nanoAVR DL audio processor.