User manual

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fi cations subject to change without prior noti ce 20
3.4.1 Sound System tab
On the Sound System tab, set the following parameters.
Choose system configuration
Use the dropdown menu to select the system configuration. For home theater use, usually 5.1
Speaker System or 7.1 Speaker System will be selected. However, you should choose Custom
System for a different number of channels, a different channel assignment, or to disable LFE gain
alignment (see Custom System configuration below for more information).
This setting should be based on the number of HDMI Audio channels passing through
the nanoAVR DL, not the number of speakers being driven by the AVR. To ensure
that 7.1 content will be processed by Dirac Live, select 7.1 Speaker System.
Test signal playback device
Preset to nanoAVR DL. This will ensure that test signals are sent into your audio system via the
nanoAVR DL processor.
If the entry for nanoAVR DL is not showing, check that your nanoAVR DL processor is connected
via USB and powered on, click the Rescan button, and then use the drop-down menu to select
nanoAVR DL.
Once you have verified that this tab is correct, click the Proceed button.