User manual

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fi cations subject to change without prior noti ce 36
5 USING THE NANOAVR DL PROCESSOR
Once the desired correction filters have been downloaded into the nanoAVR DL processor, the computer is not
required and can be disconnected. The front panel, an infrared remote, or the miniDSP smartphone app can be
used to control:
 Filter set selection
 HDMI input selection
 Master volume (remote control and smartphone app only)
 Master mute (remote control and smartphone app only)
 Dirac Live® filtering on/off (remote control and smartphone app only)
5.1 STATUS INDICATORS
The current status of the nanoAVR DL is indicated by a set of LEDs:
Preset Indicates the currently selected filter set (1 through 4).
Input Indicates the currently selected HDMI input (1 or 2).
M Master mute is enabled.
B Dirac Live® filtering is enabled.
5.2 FRONT PANEL CONTROLS
The nanoAVR uses a minimalist physical control design with a single control button.
To change the selected filter set
Briefly press the control button. The selection LED blinks quickly. Briefly press the button to
move to the next filter set, and repeat until the desired LED is lit. Press and hold the control
button, and the LED will now remain steady.
To change the selected input
Press and hold the control button. The LED indicating the selected HDMI input will switch to the
other input. Release the button.