User manual

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fi cations subject to change without prior noti ce 39
6 ADDITIONAL INFORMATION
6.1 THE NANOAVR DL UTILITY PROGRAM
The NanoAVR DL Utility program is an auxiliary program for configuring certain functions of the nanoAVR DL. It
is not used for measurement or calibration.
Master volume
Displays the current master volume setting.
Mute
Mutes all audio output.
Connect/Connected
Click on the Connect icon to connect to the nanoAVR
DL. To disconnect, quit from the utility program.
Source
Displays the currently selected HDMI input. Click to
show a dropdown menu to select the input.
Channel Mode
Selects the way in which audio channel count is
signaled to the downstream HDMI device. See
Channel Mode below.
Get Activation Serial Number
Click to get the unique activation serial number for
this unit. See License activation on page 12.
Refresh DSP Program
Updates the internal DSP program with the version
contained in the utility program. Use this after
downloading a new version of NanoAVR DL Utility.
Restore All to Default
Clears all four loaded filter presets.
About
Provides the current versions of DSP firmware. Please provide this information when submitting
a support ticket at minidsp.desk.com.
IR Learning
Buttons used to learn infrared remote control codes. See Infrared remote control.