User manual

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and speci fi cations subject to change without prior noti ce 40
Be sure to quit Dirac Live Calibration Tool For miniDSP before starting the NanoAVR DL Utility
program. Running both programs at the same time may result in communication conflicts and odd
behavior.
6.2 CHANNEL MODE
The HDMI protocol includes information specifying the number of audio channels in the HDMI stream. The
number of audio channels that the nanoAVR DL signals on its HDMI output to the downstream HDMI device is
selected by the Channel Mode dropdown selector:
Auto The number of output channels signaled is the same as received on the selected input. For
example, if the selected source signals that HDMI audio is carrying a stereo signal, the nanoAVR
DL passes this to its output. If the source signals that HDMI audio is carrying six channels (5.1),
the nanoAVR DL passes this to its output. And so on. This is the recommended (and default)
setting for the nanoAVR DL.
Stereo The nanoAVR DL always signals stereo output, regardless of the number of input channels.
4.0 The nanoAVR DL always signals four-channel output, regardless of the number of input channels.
5.1 The nanoAVR DL always signals six-channel output, regardless of the number of input channels.
7.1 The nanoAVR DL always signals eight-channel output, regardless of the number of input
channels.