User manual
Table Of Contents
- Important Information
- 1 Product Overview
- 2 Installation and Setup
- 3 Acoustic Measurement
- 4 Filter Design
- 5 Using the DDRC-88A audio processor
- 6 Optimizing gain structure
- 7 Additional Information
PRELIMINARY AND SUBJECT TO CHANGE
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 10
1.3 DDRC-88A / DIRAC LIVE® CONFIGURATION STEPS
The steps for configuring the DDRC-88A audio processor with Dirac Live® to optimize your home theater system
is summarized as follows:
1. Connect the DDRC-88A audio processor into your system and
install software. See Section 2, Installation and Setup.
2. Run a series of acoustic measurements using the Dirac Live
Calibration Tool For miniDSP program, to capture the acoustic
behavior of your speakers and room. See Section 3, Acoustic
Measurement.
3. Generate digital room correction filters that will be executed by
the DDRC-88A processor. Up to four filter sets can be downloaded
into the processor for easy real-time recall and auditioning. See
Section 4, Filter Design.
4. Once the digital room correction filters are designed and
downloaded, the computer can be disconnected, as computer
connectivity is not required for normal listening. See Section 5,
Using the DDRC-88A audio processor.