User manual

PRELIMINARY AND SUBJECT TO CHANGE
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 35
5 USING THE DDRC-88A AUDIO PROCESSOR
Once the desired correction filters have been downloaded into the DDRC-88A audio processor, the computer is
not required and can be disconnected. The front panel and/or an infrared remote can be used to control:
 Filter set selection
 Master volume
 Master mute (remote control only)
 Dirac Live® filtering bypass (remote control only)
5.1 STATUS INDICATORS
The current status of the DDRC-88A is indicated by a set of LEDs:
Dirac Live Dirac Live® filtering is enabled.
Filter Set Indicates the currently selected filter set (1 through 4).
5.2 FRONT PANEL CONTROLS
The DDRC-88A audio processor uses a minimalist physical control design with a single control knob.
To change the volume
Rotate the control knob clockwise to increase the volume, and counter-clockwise to decrease it.
To change the selected filter set
Briefly press the control knob. The Filter Set LED blinks quickly. Rotate the control knob until the
desired filter set LED is blinking. Press the control knob again, and the selected LED will remain
steady.