User manual
Table Of Contents
- Important Information
- 1 Product Overview
- 2 Installation and Setup
- 3 Acoustic Measurement
- 4 Filter Design
- 5 Using the DDRC-88A audio processor
- 6 Optimizing gain structure
- 7 Additional Information
PRELIMINARY AND SUBJECT TO CHANGE
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 38
6.2 OUTPUT GAIN
By default, the maximum output signal level of the DDRC-88A is 2 VRMS on the RCA jacks, and 8 VRMS on the
balanced connectors. These levels are compatible with the majority of consumer and pro-audio equipment
respectively. If, however, a lower output level is required on any channel, the output gain can be reduced to 0.9
VRMS and 4 VRMS with the use of a DIP switch on the circuit board, as shown here: