Instructions for use
part as far as it will go (Fig 1)
-Once fitted on the steamer, place the
silicon tube on the support (Fig.2)
-Place a recipient under the steamer.
-On the coffee maker, select the
steam option. A little water will come
out at first. When the steam begins to
emerge, shut off the steamer.
-Put the other end of the silicon tube
into the cold milk recipient and place
the cup under the cappuccino maker
(Fig.3)
-Select the position according to
whether you want steam or milk
froth. To do this, you only have to set
the protruding arrow on the rotating
selector to the cup or steam symbol.
-Switch on the steamer again. The
hot milk froth will start to bubble into
the cup.
-You can then carry on extracting co-
ffee onto the frothed milk in the cup
to obtain Cappuccino, Mocaccino,
Latte Macchiato...
-After every use, do a water-only cycle
by selecting the steam function. To
do this, insert the silicon tube into a
recipient filled with water to clean all
the conduits in the accessory.
Once you have finished using the
appliance:
- Turn the appliance off, using the on/
off switch.
- Unplug the appliance to the mains.
- Remove the water from the water
tank.
- Clean the appliance
Cleaning
- Disconnect the appliance from the
mains and let it cool before underta-
king any cleaning task.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as blea-
ch, or abrasive products, for cleaning
the appliance.
- Do not submerge the appliance in
water or any other liquid, or place it
under a running tap.
- It is advisable to clean the applian-
ce regularly and remove any food
remains.
How to deal with lime scale incrusta-
tions:
- For the appliance to work correctly
it should be kept free of lime scale or
magnesium incrustations caused by
the use of hard water.
- To prevent this kind of problem, we
recommend the use of water with low
lime or magnesium mineralisation.
- However, if it is not possible to
use the kind of water recommended
above, you should periodically remove
the lime scale from the appliance:
- Every 6 weeks if the water is “very
hard”.
- Every 12 weeks if the water is
“hard”.
- To do so, we recommend the use
of the specific product Taurus Decal,
which can be found in specialised
shops and authorised technical
services.
0DQXDO0LQLPRNDLQGE
20