User manual

MWGAR/MWGARB User Manual

Version: 2.0

Item Description

Disable Wireless LAN

Interface

Click on to disable the wireless LAN data

transmission.

Band Click to select 2.4GHz(B) / 2.4GHz(G) /

2.4GHz(B+G)

Mode Click to select the WLAN AP / Client / WDS /

AP+WDS wireless mode.

Site Survey

The Site Survey button provides tool to scan the

wireless network. If any Access Point or IBSS is

found, you could choose to connect it manually

when client mode is enabled. Refer to 3.3.9 Site

Survey.

SSID It is the wireless network name. The SSID can be 32

bytes long.

Channel Number Select the wireless communication channel from

pull-down menu.

Associated Clients

Click the Show Active Clients button to open Active

Wireless Client Table that shows the MAC address,

transmit-packet, receive-packet and

transmission-rate for each associated wireless

client.

Enable Mac Clone

(Single Ethernet

Client)

Take Laptop NIC MAC address as wireless client

MAC address. [Client Mode only]

Enable Universal

Repeater Mode

Click to enable Universal Repeater Mode

SSID of Extended

Interface

Assign SSID when enables Universal Repeater

Mode.

Apply Changes

Click the Apply Changes button to complete the

new configuration setting.

Reset

Click the Reset button to abort change and recover

the previous configuration setting.

3.3.5 Wireless - Advanced Settings

These settings are only for more technically advanced users who have a