User manual

MWGAR/MWGARB User Manual

Version: 2.0

Refer to 4.12 What is Beacon Interval?

Data Rate Select the transmission data rate from pull-down

menu. Data rate can be auto-select, 11M, 5.5M, 2M

or 1Mbps.

Preamble Type

Click to select the Long Preamble or Short

Preamble support on the wireless data packet

transmission.

Refer to 4.13 What is Preamble Type?

Broadcast SSID Click to enable or disable the SSID broadcast

function.

Refer to 4.14 What is SSID Broadcast?

IAPP Click to enable or disable the IAPP function.

Refer to 4.20 What is Inter-Access Point

Protocol(IAPP)?

802.11g Protection Protect 802.11b user.

RF Output Power To adjust transmission power level.

Turbo Mode

Click to enable/disable turbo mode.(Only apply to

WLAN IC of Realtek).

Apply Changes

Click the Apply Changes button to complete the

new configuration setting.

Reset

Click the Reset button to abort change and recover

the previous configuration setting.

3.3.6 Wireless - Security Setup

This page allows you setup the wireless security. Turn on WEP, WPA,

WPA2 by using encryption keys could prevent any unauthorized access to

your wireless network.