User manual

MWGAR/MWGARB User Manual
Version: 2.0
The WEP key is composed of initialization vector (24
bits) and secret key (40-bit or 104-bit).
Key Format Select the WEP shared secret key format from
pull-down menu. The format can be chose between
plant text (ASCII) and hexadecimal (HEX) code.
Default Tx Key Set the default secret key for WEP security function.
Value can be chose between 1 and 4.
Encryption Key 1 Secret key 1 of WEP security encryption function.
Encryption Key 2 Secret key 2 of WEP security encryption function.
Encryption Key 3 Secret key 3 of WEP security encryption function.
Encryption Key 4 Secret key 4 of WEP security encryption function.
Apply Changes
Click the Apply Changes button to complete the
new configuration setting.
Close Click to close this WEP Key setup window.
Reset
Click the Reset button to abort change and recover
the previous configuration setting.
WEP encryption key (secret key) length:
Length
Format
64-bit 128-bit
A
SCII 5 characters 13 characters
HEX 10 hexadecimal codes 26 hexadecimal codes
23
MWGAR/MWGARB User Manual Copyright © 2006 Minitar Corporation
3.3.7 Wireless - Access Control
If you enable wireless access control, only those clients whose wireless
MAC addresses are in the access control list will be able to connect to
your Access Point. When this option is enabled, no wireless clients will be
able to connect if the list contains no entries.