Manualshelf

User manual

ManualsBrandsMinitar ManualsComputer equipmentMWGAR
31323334353637383940
MWGAR/MWGARB User Manual
Version: 2.0
access allowed list.
Reset
Click the Reset button to abort change and recover
the previous configuration setting.
3.3.8 WDS Settings
Wireless Distribution System uses wireless media to communicate with
other APs, like the Ethernet does. To do this, you must set these APs in
the same channel and set MAC address of other AP that you want to
communicate with in the table and then enable the WDS.
Screen snapshot – WDS Setup
25
MWGAR/MWGARB User Manual Copyright © 2006 Minitar Corporation
Item Description
Enable WDS Click the check box to enable wireless distribution
system. Refer to 4.21 What is Wireless Distribution
System (WDS)?
MAC Address Fill in the MAC address of AP to register the wireless
distribution system access capability.
Comment Fill in the comment tag for the registered AP.
Apply Changes
Click the Apply Changes button to register the AP
to new configuration setting.
Reset
Click the Reset button to abort change and recover