User manual

MWGAR/MWGARB User Manual

Version: 2.0

the previous configuration setting.

Set Security Click button to configure wireless security like

WEP(64bits), WEP(128bits), WPA(TKIP),

WPA2(AES) or None

Show Statistics It shows the TX, RX packets, rate statistics

Delete Selected Click to delete the selected clients that will be

removed from the wireless distribution system.

Delete All Click to delete all the registered APs from the

wireless distribution system allowed list.

Reset

Click the Reset button to abort change and recover

the previous configuration setting.

I WDS Security Setup

Requirement: Set [Wireless]->[Basic

Settings]->[Mode]->AP+WDS

This page is used to configure the wireless security between APs.

Refer to 3.3.6 Wireless Security Setup.

Screen snapshot – WDS Security Setup

II WDS AP Table

ow WDS statistics

This page is used to sh