User manual

MWGAR/MWGARB User Manual

Version: 2.0

PPPoE Click to select PPPoE support on WAN interface.

There are user name, password, connection type

and idle time settings need to be done.

User Name If you select the PPPoE support on WAN interface,

fill in the user name and password to login the

PPPoE server.

Password If you select the PPPoE support on WAN interface,

fill in the user name and password to login the

PPPoE server.

Service Name Fill in the service name of Service Name. The

default value is empty.

Connection Type Select the connection type from pull-down menu.

There are Continuous, Connect on Demand and

Manual three types to select.

Continuous connection type means to setup the

connection through PPPoE protocol whenever this

WLAN Broadband Router is powered on.

Connect on Demand connection type means to

setup the connection through PPPoE protocol

whenever you send the data packets out through the

WAN interface; there are a watchdog implemented

to close the PPPoE connection while there are no

data sent out longer than the idle time set.

Manual connection type means to setup the

connection through the PPPoE protocol by clicking

the Connect button manually, and clicking the

Disconnect button manually.

Idle Time

If you select the PPPoE and Connect on Demand

connection type, fill in the idle time for

auto-disconnect function. Value can be between 1

and 1000 minutes.

MTU Size Fill in the mtu size of MTU Size. The default value is

1400. Refer to 4.23 What is Maximum Transmission

Unit (MTU) Size?

Attain DNS

Automatically

Click to select getting DNS address for PPPoE

support. Please select Set DNS Manually if the

PPPoE support is selected.