User manual

MWGAR/MWGARB User Manual
Version: 2.0
from the ports.
Apply Changes
Click the Apply Changes button to register the ports
to port filtering list.
Reset
Click the Reset button to abort change and recover
the previous configuration setting.
Delete Selected Click to delete the selected port range that will be
removed from the port-filtering list.
Delete All Click to delete all the registered entries from the
port-filtering list.
Reset
Click the Reset button to abort change and recover
the previous configuration setting.
3.3.13 Firewall - IP Filtering
Entries in this table are used to restrict certain types of data packets
from your local network to Internet through the Gateway. Use of such
filters can be helpful in securing or restricting your local network.
Screen snapshot – Firewall - IP Filtering
38
MWGAR/MWGARB User Manual Copyright © 2006 Minitar Corporation
Item Description
Enable IP Filtering Click to enable the IP filtering security function.
Local IP Address
Protocol
Comments
To restrict data transmission from local network on
certain IP addresses, fill in the IP address and the
protocol, also put your comments on it.