User manual

MWGAR/MWGARB User Manual
Version: 2.0
I VPN Setup - Edit Tunnel
Screen snapshot – VPN Setup-Edit-1
45
MWGAR/MWGARB User Manual Copyright © 2006 Minitar Corporation
Item Description
Enable Tunnel # Click to enable the IPSEC VPN current tunnel.
Connection Name Assign the connection name tag.
Auth Type
Click to select PSK or RSA.
Local Site
Local IP
Address/Network
Local Subnet Mask
Click to select Single Address or Subnet Address
VPN connection.
Fill in IP address or subnet address depends on
which Local Site option you choose.
Fill in the local subnet mask.
Remote Site
Remote Secure
Gateway
Remote IP
Address/Network
Remote Subnet
Mask
Click to select Single Address, Subnet Address,
Any Address or NAT-T Any Address VPN remote
connection.
Fill in remote gateway IP address
Fill in IP address or subnet address depends on
which Remote Site option you choose.
Fill in remote subnet mask
Local/Peer ID
Local ID Type
Local ID
Define IKE exchange information type
Click to select IP, DNS or E-mail as local exchange
type