User manual

MWIPC-1510WG User Manual

9. Please enter the default password “1234” and click “OK” to login to the IP setup page.

10. Internet Camera is working through the network (TCP/IP Protocol). The IP address and

subnet mask setting must be correct, or you cannot access to the camera. The wizard

program will detect the IP address status of your network automatically and suggest a free

IP address for the Camera. You can accept the suggested value or enter the value

manually. If you enter the value manually, please be aware that the “Subnet Mask” must

be the same for both the camera and the PC. Click “Finish” to apply the configuration.

11. This wizard will pop up a window to ask you if you want to run the “Camera Viewer” and

see the video of the Camera immediately. Select “OK” to run “Camera Viewer”.