User manual

MWIPC-1510WG User Manual

8.2. LAN Setting

LAN

Network Type This camera can obtain IP via DHCP protocol or specified static

IP Address to it..

IP Address Enter an unused IP Address within the IP address range used on

your LAN. If the IP Address of your LAN is from the 192.168.2.0

to 192.168.2.250, you can set an unused IP Address from the

range for the camera, for example: 192.168.2.250.

Subnet Mask The Subnet Mask field must match the subnet setting on your

LAN. For example: 255.255.255.0.