User`s manual

MINIX
890GX/880G-USB3 User's Manual
- 12 -
2.5.4 Guide for installing the antennas of the Wi-Bluetooth module(optional)
1.) Locate the Wi-Bluetooth combo
mini card at the bottom side of the
motherboard. Identify the 2 connectors
for the antennas, please note that
ANT1 is assigned for Wifi and ANT2
is assigned for Bluetooth, you MUST
con n e c t b o t h co n n e ctor s t o t h e
antennas in order to enjoy full function
of the card.
2. ) Ge n t ly p lug i n t h e w i res o f
antennas onto both connectors of the
Wifi-Bluetooth combo mini card, you
will hear a “click” sound when they are
installed and locked properly.
3.) Identify the notch on the edge of
the PCB at the side of the rear I/O
panel; this notch is designed to let the
antennas to go through to the top side
of the motherboard.
4.) Route both antennas through the
notch as illustrated in the picture.
5.) Identify the mounting holes on the
I/O shield for the 2 antennas, ANT.1 for
Wifi antenna and ANT.2 for Bluetooth
antenna.
6.) Unscrew the nuts off the bolts of
both antennas, while keeping the rings
of both antennas adhered.
1
2
3
4
5
6