User`s manual

ManualsBrandsMinix ManualsComputer equipment890GX

MINIX

890GX/880G-USB3 User's Manual

- 20 -

before the operating system is started. Each of POST routines is assigned a POST code, a unique

number which is sent to I/O port 080h before the routine is executed.

4.5 BIOS Setup — CMOS Setup Utility

4.5.1 CMOS Setup Utility

After powering up the system, the BIOS message appears on the screen,when the rst time or

when CMOS setting wrong, there is following message appears on the screen , but if the rst

rst BIOS be setuped(or loaded default values) and save, the <DEL> key will be pressed if you

will enter BIOS setup menu.

If this message disappears before you respond, restart the system by pressing <Ctrl> + <Alt>+

<Del> keys, or by pressing the reset button on computer chassis. Only when these two methods

should be fail that you restart the system by powering it off and then back on.

After pressing <F1> or <Del> key, the main menu appears.

Press F1 to Run SETUP

•

In order to increase system stability and performance, our engineering staff is constantly

improving the BIOS menu. The BIOS setup screens and descriptions illustrated in this manual

are for your reference only, and may not completely match with what you see on your screen.

•

Do not change the BIOS parameters unless you fully understand its function.

BIOS SETUP UTILITY

Main Advanced Boot Security JUSTw00t! Power Exit

System Overview

←

Select Screen

↑↓

Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit

►

System Information

System Time

System Date

Language

Floppy A

Power on Beep

[22:15:32]

[Thu 06/19/2008]

[English]

[1.44 MB 3

[Enabled]

►

SATA 1

►

SATA 2

►

SATA 3

►

SATA 4

: [Not Detected]

: [Hard Disk]

: [Not Detected]