NEO X7 16GB Quad Core Media Hub Setup Guide Android™ is a trademark of Google Inc.
Thank you for purchasing MINIX NEO X7. Follow this guide to setup your device. MINIX NEO X7 is a revolutionary smart media hub based on a Quadcore ARM Cortex-A9 processor with Quad-core Mali-400MP4 GPU and the latest Android™ OS. Sign into Google Play Store to download the favorite applications and install them directly into MINIX NEO X7. YouTube™, Internet radio and lots of other applications are all readily available on Google Play Store.
Content Chapter 1: Connect .......................................................5 What's in the box ....................................................................................6 MINIX NEO X7 at a glance ....................................................................7 What you need ......................................................................................11 Setting up MINIX NEO X7 .....................................................................12 Chapter 2: Basic Setup ......
Chapter 1 Connect.
What’s in the box - MINIX NEO X7 x 1 MINIX NEO X7 Antenna x 1 5V Power adapter x 1 MINIX Remote x 1 Micro-USB cable x 1 (connecting to a PC) OTG cable x 1 (extend one more USB port) HDMI cable x 1 Setup guide x 1 -6-
MINIX NEO X7 at a glance 8 9 10 11 12 13 14 1 15 2 34 5 1. 2. 3. 4. 5. 6. 7. 6 7 8. Recover button (for service and upgrade) 9. HDMI port 10. Optical audio port 11. USB 2.0 port 3 12. USB 2.0 port 4 13. Ethernet jack 14. DC 5V Power-in jack 15.
Power LED The LED glows when the MINIX NEO X7 is on. Power button To power on MINIX NEO X7, press and hold the power button for 2-3 seconds until the power LED glows. To power off MINIX NEO X7, press and hold the power button and the display will prompt out the confirmation dialogue for power off, select OK to confirm; OR hold the power button for 8 seconds to force power off, the LED will be off. Earphone jack Connect to an external audio output device such as earphone or speaker.
Recover button This button is to be used together with the OTG port when connecting to a computer for service/upgrade purpose. To upgrade manually, firstly connect the micro USB cable to a PC, then press and hold this button AND power up NEO X7 at the same time. Release this button once the PC detects NEO X7. HDMI port Connect MINIX NEO X7 to the HDMI port of a high-definition TV or PC monitor using an HDMI cable.
Ethernet jack Connect to the Ethernet cable for Internet access.
What you need To start using MINIX NEO X7, you need the following: High-definition TV/ PC monitor A high-definition TV or PC monitor that can display 720p or 1080p video with at least one HDMI input. Cable An HDMI cable to connect MINIX NEO X7 to your TV. Wireless network A wired network cable or an 802.11 b/g/n, or n Wi-Fi wireless network (wireless video streaming requires 802.11g or n), your wireless network name and password.
Setting up MINIX NEO X7 MINIX NEO X7 connects to your TV or PC monitor through an HDMI port that delivers both audio and video. Before you set up MINIX NEO X7, look at the ports on the side/back of your TV or PC monitor to make sure you have the right cable: - An HDMI cable: You can connect MINIX NEO X7 to an HDTV or home theater receiver that has an HDMI port, using an HDMI cable for both video and audio. Step 1: Connecting the cable 1.
Chapter 2 Basic Setup.
Language setup You may choose the desired system language by the following steps: Launcher Home Screen > Settings > Language & input > Language The default language is English, you may choose your desired language and click to confirm. Time zone setup You should adjust the time zone according to your current location by the following steps: Launcher Home Screen > Settings > Date & time > Select time zone Choose your time zone and click to confirm.
Chapter 3 Google Play Store.
Sign-in to your Google Account Launch the Google Play Store by the following steps: Launcher Home Screen -> Google Play Store, hit and confirm. To use Google Play Store you need a Google Account. If you already had a Google Account, select “Sign in” and login with your Google Account. If you don’t have a Google Account yet, select “Get a Google Account” and complete the rest of the process.
Chapter 4 Control.
Different control methods You may control your MINIX NEO X7 with the following input devices: 1.) RKRemoteControl App. (for Android Smartphone or tablet PC) 2.) Wired mouse; 3.) 2.4GHz USB wireless keyboard and mouse set; 4.) 2.4GHz USB wireless AirMouse remote control (MINIX NEO A1+, MINIX NEO A2, to be sold separately); 5.) MINIX infrared remote control(included). Using your MINIX remote Read on to learn about using your MINIX remote with MINIX NEO X7.
Functions of the MINIX remote OK MENU - Show menu options HOME - Return to Home Screen POWER - Enter/Exit sleep mode BACK - Return to previous screen/cancel action - 19 -
VOLUME DOWN - Adjust the system volume down VOLUME UP - Adjust the system volume up UP - Move upward LEFT - Move left RIGHT - Move right DOWN - Move downward OK - To confirm a particular action, and as an “Enter” key - 20 -
Copyright © 2013 MINIX Tech. All rights reserved. No part of this guide, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of MINIX.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
NEO X7 16GB Quad Core Media Hub 用户指南
感谢您选购MINIX NEO X7. 遵循此指南设置您的设备。 MINIX NEO X7是一款革命性的迷你电脑,基于瑞芯微RK3188四核ARM Cortex-A9处理器和四核Mali-400MP4 GPU以及最新的Android™操作系 统,连接液晶电视或电脑显示器,即可成为一台功能完整的电脑、智能 电视盒、高清播放机、网络机顶盒或者游戏机。登录任何安卓应用市场 (如:百度应用等)即可下载喜欢的应用程序并直接安装到MINIX NEO X7.
目录 第一章:安装连接 .......................................................5 包装及附件 ....................................................................................6 MINIX NEO X7一览 .................................................................7 您需要准备的 ......................................................................................11 安装连接 MINIX NEO X7 ........................................................12 第二章:基础设置 ................................................13 语言设置.............................
第一章 安装连接 -5-
包装及附件 - MINIX NEO X7 x 1 - MINIX NEO X7天线 x 1 - MINIX 遥控器 x 1 - 5V 电源适配器 x 1 - Micro-USB OTG 排线 x 1 - Micro-USB 数据线 x 1 - HDMI 排线 x 1 - 使用指南 x 1 -6-
MINIX NEO X7一览 8 9 10 11 12 13 14 1 15 2 34 5 1. 2. 3. 4. 5. 6. 7. 8. 6 7 电源指示灯 电源键 耳机接口 麦克风接口 USB接口1 SD/MMC卡接口 OTG接口(也可作为USB接口2) 复位键 (服务或更新时使用) -7- 9. HDMI 接口 10. 音频光纤接口 11. USB 2.0 接口 3 12. USB 2.0 接口 4 13. 以太网接口 14. DC 5V充电接口 15.
电源指示灯 MINIX NEO X7 开机状态下指示灯亮。 电源键 MINIX NEO X7开机时按住电源键保持2-3秒直到电源指示灯亮起。关机 时按住电源键,显示器会提示出确认关闭对话框,选择OK确认关闭,或 者长按电源键8秒强制关机,电源指示灯灭掉。 耳机接口 连接到一个外部音频输出设备如耳机或喇叭。 麦克风接口 连接麦克风输出声音。 SD/MMC 卡接口 可增大存储容量或直接从 SD/MMC 卡读取文件,支持扩充到的最大容量 为32GB 。 -8-
OTG 接口 Micro-USB线较小的一端连接此接口,另一端连接电脑用于同步数据或升 级。当与包装中的 Micro-USB OTG线配合使用时,此接口也可作为额外 的USB接口。 复位键 当连接电脑服务或升级时,此按键与OTG接口配合使用。在连接到电脑 USB接口之前按住此按键并保持,当MINIX NEO X7启动时释放按键。 HDMI 接口 用一根HDMI 线连接 MINIX NEO X7到高清电视或电脑显示器的HDMI接 口。 音频光纤接口 连接到外部声音处理单元(如扬声器)的音频光纤输入接口。 USB 2.0 接口 连接外部USB设备,如USB闪存驱动器、无线键盘鼠标接收器、USB鼠 标、无线耳机接收器等到MINIX NEO X7.
以太网接口 连接网线接入互联网。如果您想做进一步设置如PPPoE 拨号,请进入设置页 面: 设置→ 更多… 当连接网线时,MINIX NEO X7可作为路由器和Wi-Fi接入点使用;如果 您需要使用Wi-Fi接入点功能,请确保在您通过:设置→ 更多… 启动Wi-Fi接入点服务之前,Wi-Fi功能是关闭状态。 DC 5V 充电接口 将包装内提供的5V 电源适配器连接到此端口。MINIX NEO X7操作所需 电流低于1A,但是考虑到您需要连接其他牵引功率的外部设备(如外接硬 盘),故我们提供一个5V 3A的电源适配器。 - 10 -
您需要准备的 要使用MINIX NEO X7, 以下是您需要准备的: 高清电视/电脑显示器 一个高清电视或电脑显示器,可以显示720p 或1080p 视频和至少一个 HDMI输入接口。 排线 一根 HDMI排线用于MINIX NEO X7与电视连接。 无线网络 一个 802.11 b/g/n, 或者 n Wi-Fi 无线网络(无线视频流需要802.
安装连接 MINIX NEO X7 通过HDMI端口将MINIX NEO X7与电视或电脑显示器相连接,传输音 频、视频。在设置 MINIX NEO X7之前,查看您的电视或电脑显示器侧 面/背面的端口,确保您有合适的排线: HDMI 排线: 用一根HDMI排线将MINIX NEO X7与有HDMI端口 的高清电视或家庭影院接收器相连接传输视频或音频。 步骤1:连接排线 1. 将HDMI排线的一端与电视/电脑显示器的HDMI端口相连接。 2. 将排线的另一端与MINIX NEO X7的HDMI端口相连接。 步骤2:连接电源 将包装中提供的5V电源适配器与此端口相连,按住电源键2-3秒,当电源 指示灯变亮时MINIX NEO X7开机完成。 步骤3:打开电视/电脑显示器并选择输入 打开电视或电脑显示器,选择对应的HDMI端口连接到MINIX NEO X7.
第二章 基础设置 - 13 -
语言设置 您可以通过以下步骤选择所需的系统语言: 开启主屏幕> 设置> 语言&输入>语言 默认语言是英语,您可以选择您想要的语言并确认。 时区设置 您可以根据您的当前位置通过以下步骤调整时区: 开启主屏幕> 设置> 日期 & 时间 > 选择时区 选择您的时区并确认。 无线网络设置(基础) 通过以下步骤连接到无线网络,您就可以访问互联网: 选中该选项“发现可用的网络开 开启主屏幕 > 设置 > Wi-Fi > 启Wi-Fi ” wi - fi将打开并自动扫描可用的无线网络,然后选择你想要的无线网络连接 并确认,当虚拟键盘提示时输入wi – fi密码,最后,点击“连接”按键。 - 14 -
第三章 安卓应用市场 - 15 -
遵循以下步骤安装应用程序或游戏: 登录浏览器 搜索“安卓市场” 下载、安装您喜欢的“安卓市场” 打开“安卓市场” 搜索您想要安装的应用程序或游戏 下载并安装应用程序或游戏 打开并使用应用程序 (注:MINIX推荐使用正版软件) - 16 -
第四章 操控 - 17 -
不同的操控方法 您可以通过以下输入设备操控 MINIX NEO X7: 1.) 下载RKRemoteControl App,将其安装在智能手机或平板上,第一次 使用这个功能,需要打开X7上的eHomeMediaCenter软件; 2.) 有线鼠标; 3.) 2.4GHz USB 无线键盘和鼠标设备; 4.) MINIX 红外遥控 (包含); 5.) 2.4GHz USB 无线飞鼠,可以购买MINIX NEO A1+和MINIX NEO A2.在开机之前,请将飞鼠的USB接头插在X7上。 使用MINIX遥控器 请继续阅读,学习使用MINIX遥控器和MINIX NEO X7.当使用我们定制 的用户界面-GridShow桌面启动器时,遥控功能将达到100%.
MINIX遥控器功能 OK 菜单 - 为当前的屏幕或运行的应用程序调出选项菜单 主页 - 回到主屏幕 (选择需要的桌面启动器) 电源 - 使MINIX NEO X7开启或进入睡眠模式 返回 - 返回上一界面或取消一个操作 OK - 确认一个特定的操作,相当于 “Enter” 按键 - 19 -
上 - 向上移动 下 - 向下移动 左 - 向左移动 右 - 向右移动 音量减小 - 系统音量调小 音量增大 - 系统音量调大 - 20 -
版权©2013 MINIX.保留所有权利。 没有MINIX明确的书面许可,禁止以任何形式或通过任何途径将此指南的 任何部分包括产品和软件描述,复制、传播、转录、存储进检索系统或 翻译成任何语言;购买者以备份的目的保存文档除外。此条款不适用于 获得通用公共许可证(“GPL”)许可或其他免费开放资源许可的软件。许 可条款副本及需要时提供的源代码都包含在产品中。 Google, Android, Gmail, Google Maps, Chrome, Google Play, YouTube, Google+, 和一些其他商标均为谷歌公司的财产。谷歌商标的列表可以 在 http://www.google.com/permissions/guidelines.html中找到。MINIX和 MINIX的标识是MINIX科技的商标。所有其他标志或商标均为它们各自所 有者的财产。 此指南内容在一些细节上可能与产品或它的软件不同。本文件中的所有 信息可做更改,不另行通知。 在线帮助和支持请访问www.minix.com.
MINIX NEO X7 im Überblick 8 9 10 11 12 13 14 1 15 2 34 5 6 7 1. Power LED 2. Ein/AUS Schalter 3. Kopfhörer Anschluss 4. Mikrofon Anschluss 5. USB Port 1 6. SD/MMC Karten Steckplatz 7. OTG Port (dient auch als USB Port 2) -1- 8. Recover / Wiederherstellungstaste (für Service & Upgrade) 9. HDMI Anschluss 10. Optischer Audio Auschluss 11. USB 2.0 Anschluss 3 12. USB 2.0 Anschluss 4 13. Ethernet Anschluss 14. Eingang Netzteilkabel 5V 15.
Power LED Die LED leuchtet bei eingeschaltetem MINIX NEO X7. EIN/AUS Schalter Um den MINIX NEO X7 einzuschalten, drücken Sie für 2-3 Sekunden den EIN/AUS Schalter, bis die Power LED leuchtet. Um den MINIX NEO X7 auszuschalten, drücken Sie den EIN/AUS Schalter, bis Sie über das Display aufgefordert werden, dies zu bestätigen. Bestätigen Sie dies nun ODER halten Sie den EIN/AUS Schalter für 8 Sekunden gedrückt, um das Ausschalten zu erzwingen, bis die LED erlischt.
OTG Port Verbinden Sie den Micro-USB Stecker des Micro-USB Kabels mit dem OTG Port des NEO X7 und das andere Ende mit dem USB Anschluss Ihres Computers für die Synchronisation und zum Zweck von Upgrades. Dieser Port dient auch als weiterer USB Port in Verbindung mit dem mitgelieferten Micro-USB OTG Kabel. Recover / Wiederherstellungstaste Diese Taste wird zusammen mit dem OTG Port für Service/Upgradezwecke benutzt.
Ethernet Anschluss Alternativ zum Wi-Fi Anschluss können Sie diesen LAN Anschluss mit Ihrem Netzwerk per LAN-Kabel für den Zugang zum Internet verbinden. Für erweiterte Einstellungen, wie etwa PPPoE Einwahl, navigieren Sie zu den Einstellungen bei Einstellungen -> Mehr... Während der MINIX NEO X7 per LAN Kabel mit dem Internet verbunden ist, kann der NEO X7 als Router und als Wi-Fi Hotspot genutzt werden.
Was benötigt wird Um den MINIX NEO X7 zu benutzen, brauchen Sie Folgendes: High Definition TV / PC Monitor Ein HD-fähiges TV Gerät oder PC Monitor, welches 720p oder 1080p Video wiedergeben kann mit einem freien HDMI Eingang. Kabel Ein HDMI Kabel, um den MINIX NEO X7 mit Ihrem TV zu verbinden. Netzwerk Ein Netzwerkkabel als Verbindung zu Ihrem Router oder ein 802.11 a, b, g, n Wi-Fi Netzwerk (Wireless Video Streaming benötigt 802.11 g oder n), den Namen und das Passwort Ihres WLANs.
Einrichten des MINIX NEO X Der MINIX NEO X7 wird über den HDMI Port mit Ihrem HDMI-fähigen TV oder PC Monitor verbunden, wobei sowohl Bild als auch Ton mittels eines HDMI Kabels übertragen werden.
Einstellung der Sprachversion Sie können das Betriebssystem auf die gewünschte Systemsprache einstellen wie folgt: Launcher Home Screen > Settings > Language & input > Language Die voreingestellte Sprache ist Englisch, hier können Sie die gewünschte Sprache auswählen und bestätigen. Einstellung der Zeitzone Stellen Sie die Zeitzone Ihres Standorts ein wie folgt: Übersicht Launcher Home Screen > Einstellungen > Datum & Uhrzeit > Zeitzone auswählen Wählen Sie Ihre entsprechende Zeitzone aus.
Verbinden mit Ihrem Google Account Aktivieren Sie den Zugang zum Google Play Store wie folgt: Übersicht Launcher Home Screen > Google Play Store > anklicken Um den Google Play Store nutzen zu können, brauchen Sie ein Google Nutzerkonto. Wenn Sie bereits einen Google Account haben, wählen Sie “Anmelden“ und loggen Sie sich mit Ihren Zugangsdaten ein. Wenn Sie noch kein Google Nutzerkonto haben, wählen Sie “Google Konto einrichten“ und folgen Sie den Anweisungen.
Diverse Möglichkeiten der Bedienung Sie können Ihren MINIX NEO X7 mit folgenden Eingabegeräten bedienen: 1.) RKRemoteControl App (für Android Smartphone oder Tablet PC) 2.) USB Kabelmaus 3.) 2,4GHz USB Funktastatur- und -maus Set 4.) 2,4GHz USB kabellose AirMouse Fernbedienung / Keyboard (MINIX NEO A1+, MINIX NEO A2, separat erhältlich) 5.
Funktionen der MINIX Fernbedienung OK MENU - Aufrufen des Optionsmenüs des aktuellen Screens oder der laufenden App HOME - Zurück zum Home Screen mit Auswahl des Launchers POWER - Hiermit wird der Sleep Mode/Schlafmodus des MINIX NEO X7 aktiviert bzw.
Absenken der Lautstärke Erhöhen der Lautstärke HOCH - Nach oben bewegen LINKS - Nach links bewegen RECHTS - Nach rechts bewegen UNTEN - Nach unten bewegen OK - Bestätigen eines Dialogs, und „Enter/Eingabe“ Taste - 11 -
Copyright © 2013 MINIX Tech. Alle Rechte vorbehalten. Kein Teil dieses Handbuchs, einschließlich der darin beschriebenen Produkte und Software, darf in irgendeiner Form oder mit irgendwelchen Mitteln vervielfältigt, übertragen, überschrieben, in einem Datenabfragesystem gespeichert oder in irgendeine Sprache übersetzt werden, ohne die ausdrückliche schriftliche Genehmigung von Minix, außer durch den Käufer zum Zweck der Datensicherung.