Specifications

INSTALLING THE LIGHT PLATE

Fig. 16

Screw

Mounting plate

Light plate

NOTE: Before starting installation, disconnect the power by turning off the circuit breaker or

removing the fuse at fuse box.

Step 1. Remove 1 of 3 screws from the mounting plate and loosen the other 2 screws. (Do not

remove)

Step 2. Raise and hold the light plate close to the mounting plate and proceed to do the wire

connections. Connect the white wire connectors from the light plate and fan, follow the same

procedure with the black wire connectors. (Fig. 16)

Step 3. Place the key holes from the light plate over the 2 screws previously loosened from

the mounting plate, turn light plate until it locks in place at the narrow section of the key

holes. Secure by tightening the 2 screws previously loosened and the one previously

removed. (Fig. 16)

Connectors