Installation & Assembly

Fig. 16

Fig. 17

THE FOLLOWING OPERATION MUST BE ACCOMPLISHED

BEFORE INSTALLING THE LIGHT KIT.

Caution: Remove 5 rubber packing mounts and discard before

installation.

Step 1. Attach the fan blade to the blade holder using the

screws and fiber washers provided. Tighten screws securely.

Repeat process for remaining blades.(Fig. 16)

Step 2. Rotate the motor so that the screw holes in motor are

aligned with the holes in blade holder and secure with proper

screws. Repeat process for the other blade holders. (Fig. 17)

BLADE INSTALLATION

BLADE HOLDER

SCREWS

FIBER

WASHERS

BLADE

BLADE HOLDER

SCREWS