User guide

Step 1. Remove 1 of the 2 screws from the bottom of the hanger bracket and loosen the other one

half a turn from the screw head.

Step 2. Slide the canopy up towards the hanger bracket and place the key hole on the canopy

over the screw on the hanger bracket, turn canopy until it locks in place at the narrow section of

the key holes. (Fig. 14)

Step 3. Align the circular hole on canopy with the remaining hole on the hanger bracket, secure by

tightening the two set screws.

Note: Adjust the canopy screws as necessary until the canopy are snug.

FINISHING THE INSTALLATION

Fig. 14

OUTLET BOX

HANGER

BRACKET

HANGER

BALL

CANOPY