Instructions / Assembly

INSTALLATION INSTRUCTIONS
Item#4531 (New. 04/11/2013)
READ AND SAVE THESE INSTRUCTIONS
WAR N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 1
Fig. 2
MOUNTING THE FIXTURE (Fig.1)
1. Shut off the power at the fuse box or circuit
breaker. If necessary, remove the old fixture
including the mounting hardware.
2. Carefully remove the fixture from the carton and
check that all parts are included as shown in the
illustration.
3. Attach mounting plate (A) to the junction box using
the mounting screws (B) (Size: #8-32N*L0.5”). The
side of the mounting plate marked “GND” must
face out.
CONNECTING THE WIRES (Fig. 2)
4. At this point, connect the electrical wires as shown
in Fig. 2, making sure that all wire connectors are
secured. If your outlet box has a ground wire
(green or bare copper), connect the fixture’s
ground wire to it. Otherwise, connect the fixture’s
ground wire directly to the mounting plate using the
green screw provided. After the wires are
connected, tuck them carefully inside the junction
box.
FINISHING THE INSTALLATION (Fig.1)
5. Place fixture body (H) over the mounting plate (A)
and secure it with screws (C).
6. Place the glass shade (E) over the socket (D) and
secure it with socket ring (F) using the spanner (G)
provided.
7. Install the light bulb(s) (not included) in accordance
with fixture specifications. (DO NOT EXCEED THE
MAXIMUM WATTAGE RATING!) (NE PAS
DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!)
Your installation is now complete. Return power to
the junction box and test the fixture.
Note: Illustration (Fig.1) on this manual is for
installation purposes only. It may or may not
be identical to the fixture purchased.
LA-2249E
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Green or
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
A
B
C
D
E
F
G
H
Socket Ring # SKT-RING-26
Set# A-021-104176
-Mounting Plate
-Ground screw
-Mounting Screw*2