Instructions / Assembly

INSTALLATION INSTRUCTION FOR FIXTURE #5381-84

MOUNTING THE FIXTURE (FIG. 1)

1. Shut off the power supply at the fuse box or circuit

breaker. If necessary, r

emove the old fixture from wall.

Including the mounting hardware.

2. Carefully remove the new fixture from the carton and

check that all parts are included as shown in the

illustration.

3. Attach the mounting plate (I) to the outlet box using

the outlet box screws J . The side of the mounting

plate marked “GND” must face out.

CONNECTING THE WIRES (FIG. 2)

1. At this point, connect the electrical wires as shown in

Fig. 2, making sure that all wire connectors are

secured. If your outlet box has a ground wire (green

or bare copper), connect the fixture’s ground wire to it.

Otherwise, connect the fixture’s groun

d wire directly to

the mounting strap using the green screw provided.

2. Tuck the wire connections neatly into the wall outlet

box.

MOUNTING THE FIXTURE (FIG. 1)

3. Attach the fixture wall plate over the mounting plate (I)

and securing with mounting screws (H) until snug.

4. Place the glass shade (F) in the ring (K), then secure

finial (M) tightly.

5. Install the bulb in accordance with fixture’s

specifications.

(DO NOT EXCEED THE

MAXIMUM WATTAGE RATING!) (NE PAS

DEPASSER LA PUISSANCE NOMINALE

MAXIMALE!).

Your installation is now complete. Return power to the

juction box and test the fixture.

Fig.2

Fig.1

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.