ORB
019
F623L
INSTALLING THE GLASS SHADE INSTALLING THE LIGHT KIT PLATE
4 Light kit plate Glass Shade 12.
8 9 5 .
5 6 7 10 8 9
11 13 12
13 11 12
13
CENTER HOUSING Step 1: Insert the blade through the slot on the center housing. Secure the blade with three blade screws and three fiber washer provided.(Fig 14) BLADE Step 2: Repeat for the remaining three blades.(Fig.
INSTALLING THE LIGHT KIT PLATE Step 1: Remove one of three screws from the mounting ring on the fan motor assembly and loosen,but do not remove, the other two screws. MOUNTING PLATE Step 2 : Place the key holes from the light kit plate over the two screws previously loosened from the mounting ring. Turn the light kit plate until it locks in place at the narrow section of the key holes. Secure by tightening the two screws previously loosened and the one screw previously removed.
LIGHT KIT PLATE Step 2 .Remove one of three screws from the light kit plate and loosen,but do not remove, the other two screws.(Fig.17) Step 3 . Place the key holes from 16W LED assembly over the two screws previously loosened from the light kit plate. Turn the 16W LED assembly until it locks in place at the narrow section of the key holes. Secure by tightening the two screws previously loosened and the one screw previously removed.(Fig.
INSTALLING THE GLASS SHADE Raise the glass shade up against light kit plate and secure it to fan by turning it clockwise until snug. DO NOT OVERTIGHTEN.
19 19
REVERSE SWITCH 20 WARM WEATHER 21 22 20 COOL WEATHER
21 22
120 0.26 15.91 76 120 0.5 59.62 163 7.08 8.34 1.
11 3,707 93 40 2257 15.91 142 4985 59.
