Alva U.S.
©2017 Minka Lighting Inc. Manual design and all elements of manual design are protected by United States Federal and/or State Law including Patents, Trademark , and/or Copyright Laws.
F852L
INSTALLING THE LIGHT KIT
8 9 0
wattage MR153B TR110BL
12. Light shade(3 pcs) 13. Light bulb(3 pcs) Receiver(include 6 wire nuts) Hand held remote with 2 screws (5 pcs) 0.5 6 6 9 10 hardward 1/4* 11mm+S screw 2 (11pcs) 11 7 E. M3 L wrench F. 8mm R wrench 9. Blade holder(5 pcs) 10. Light kit assembly 11. Coupler cover 6 1 D.
ATTACHING THE FAN BLADE Step 1: Assemble the blade with blade holders with the provided blade attachment screws. (fig.5) Step 2: Assemble the blade holder onto the fan body. Pay attention to the side up. (fig.6&7) Screw Washer Blade Blade Blade Holder Screw Blade Holder Blade Fig.5 Fig.6 Fig.
2 hanger 3 8 9 ,and slip the coupler cover on to the fan body.
Hanger ball Downrod Downrod Canopy Fig.9 Hanger Bracket B clip Canpler Cover Coupler Cover Fig.8 Junction Box Coupler Cover Fan Body Clevis Pin Hanger Bracket Washer Star Washer Spring Washer Screw Fan Body Fig.10 Fig.11 Fig.12 Downrod Fig.
6 5 Fig.
Motor to Receiver electrical connections: connect the WHITE WIRE from the fan to the WHITE wire from receiver. Connect the RED wire from the fan to the RED wire from the Receiver. Connector the BLUE wire from the fan to the BLUE wire from the recelver. connect the PURPLE wire from the fan to the PURPLE wire from the receiver. Connect the GREY wire from the fan to the GREY wire from the receiver.
7 Receiver Canopy Canopy Hanger Bracket 8 Screw Screw Screw Canopy Cover cover 9 Fig.17 Fig.18 Fig.
INSTALLING THE LIGHT KIT wattage Step 1. Remove the hex screws from fan body with the L wrench.(fig.20) Step 2. Remove the 6 nuts from the light shade assembly. (fig.21) Step 3. Install the bulbs.(Fig.22) Step 4. Re-assemble the light kit shade and tighten the nut with the provided wrench. (Fig.23) Step 5. Connect the wires between the fan and light kit with the connectors. (Fig.24) Step 6. Lift the light kit assembly onto the fan body and tighten the 3 screws previously removed before. Fig.
9
26 (CLOCKWISE DIRECTION) (COUNTERCLOCKWISE DIRECTION) 27 Fig.26 Fig.
60
120 0.07 4.19 70 7.2 56 120 0.45 32.56 144 8.5 2.
6 5 272 3304.43 4.19 788.64 7044.91 32.56 216.
