User Manual

ManualsBrandsMinn Kota ManualsAnchorsMinnKota Deckhand 40 Electric Anchor Winch (40 Lbs. Capacity)

™™

OWNER’S MANUAL

MANUEL D’UTILISATION

CAUTION: Read Manual

Carefully Before Operating Your

New MINN KOTA DECKHAND.

Retain For Future Reference.

ATTENTION : Lire attentivement

ce manuel avant d'utiliser le

DECKHAND MINN KOT

Conserver le manuel pour le

consulter en cas de besoin.

REMARQUE: Ne pas retourner le DECKHAND au

concessionnaire. Il n'est pas autorisé à remplacer ou

à réparer l'appareil. En cas de panne :

•

Appeler MINN KOTA au 1-800-227-6433 ou

• Retourner le moteur au service après-vente de

MINN KOTA,

• Envoyer l'appareil à un centre de réparation MINN

KOTA agréé figurant sur la liste ci-jointe. Quelle que

soit l'option, joindre la facture, mentionner le n° de

série et la date d'achat.

NOTE: Do not return your DECKHAND to your retail-

er. Your retailer is not authorized to repair or replace

this unit. You may obtain service by:

• calling MINN KOTA at 1-800-227-6433

• returning your DECKHAND to the MINN KOTA

Factory Service Center,

• sending or taking your DECKHAND to any MINN

KOTA authorized service center.

Please include proof of purchase, serial number

and purchase date for warranty service with any of

the above options.

DECKHAND 40

MONTAGE

ATTACHER L’ANCRE

ESSAI DE FONCTIONNEMENT / BATTERIE

RÉGLAGE DE L’ARRÊT DE CORDE

FONCTIONNEMENT

DISJONCTEUR

DÉPANNAGE

ENTRETIEN

LISTE DE PIÈCES

SCHÉMA

GARANTIE

DECKHAND 40

MOUNTING

ATTACHING ANCHOR

FUNCTION TEST/BAT-

TERY

ADJUSTING ROPE ST

OPERA

TION

CIRCUIT

BREAKER

TROUBLESHOOTING

MAINTENANCE

TS LIST

SCHEMA

TIC

ARRANTY

pg.2-3

pg.3-6

pg.7

pg.8

pg.10

pg.11

pg.12

pg.13

pg.14

pg.15

Serial Number DH

Nº de série

Purchase Date

Date d’achat

Model DH 40

Modèle DH 40

ENVIRONMENTAL COMPLIANCE STATEMENT:

It is the intention of Johnson Outdoors Marine Electronics, Inc. to be a responsible corporate citizen, operating in compliance with

known and applicable environmental regulations, and a good neighbor in the communities where we make or sell our products.

WEEE Directive:

EU Directive 2002/96/EC “Waste of Electrical and Electronic Equipment Directive (WEEE)” impacts most distributors, sellers, and

manufacturers of consumer electronics in the European Union. The WEEE Directive requires the producer of consumer electron-

ics to take responsibility for the management of waste from their products to achieve environmentally responsible disposal during

the product life cycle.

WEEE compliance may not be required in your location for electrical & electronic equipment (EEE), nor may it be required for EEE

designed and intended as fixed or temporary installation in transportation vehicles such as automobiles, aircraft, and boats. In

some European Union member states, these vehicles are considered outside of the scope of the Directive, and EEE for those

applications can be considered excluded from the WEEE Directive requirement.

This symbol (WEEE wheelie bin) on product indicates the product must not be disposed of with other household refuse. It must be

disposed of and collected for recycling and recovery of waste EEE. Johnson Outdoors Marine Electronics, Inc. will mark all EEE

products in accordance with the WEEE Directive. It is our goal to comply in the collection, treatment, recovery, and environmen-

tally sound disposal of those products; however, these requirement do vary within European Union member states. For more

information about where you should dispose of your waste equipment for recycling and recovery and/or your European Union

member state requirements, please contact your dealer or distributor from which your product was purchased.

Disposal:

Minn Kota motors are not subject to the disposal regulations EAG-VO (electric devices directive) that implements

the WEEE directive. Nevertheless never dispose of your Minn Kota motor in a garbage bin but at the proper

place of collection of your local town council.

Never dispose of battery in a garbage bin. Comply with the disposal directions of the manufacturer or his repre-

sentative and dispose of them at the proper place of collection of your local town council.

DÉCLARATION DE CONFORMITÉ ENVIRONNEMENTALE :

Johnson Outdoors Marine Electronics, Inc. a l’intention d’être une corporation responsable, fonctionnant en conformité avec les

règlements environnementaux connus et applicables, et d’agir en tant que bon voisin dans les communautés où nous fabriquons

ou vendons nos produits.

Directive WEEE :

La Directive 2002/96/EC de l’Union européenne traitant des déchets d’équipement électriques et électroniques, soit "Waste of

Electrical and Electronic Equipment (WEEE)", affecte la plupart des distributeurs, vendeurs et fabriquants de produits électron-

iques dans l’Union européenne. La directive WEEE demande que le fabriquant de produits électroniques se charge de la gérance

des déchets provenant de leurs produits afin de s’en débarrasser d’une manière responsable par rapport à l’environnement au

cours du cycle de vie du produit.

Respecter la directive WEEE peut ne pas être exigé où vous vous trouvez en ce qui concerne l’équipement électrique et électron-

ique (EEE), comme ne pas être exigé pour l’équipement électrique et électronique conçu et destiné à des installations temporaires

ou permanentes dans les véhicules de transport comme les automobiles, avions et bateaux. Dans quelques pays membres de

l’Union européenne, ces véhicules sont considérés comme au-delà des limites de la directive et l’équipement électrique et élec-

tronique pour ces applications peut être considéré exclus des exigences de la directive WEEE.

Ce symbole (roue WEEE) sur un produit indique que le produit ne doit pas être jeté parmi les déchets domestiques. Il doit être mis

au rebut et ramassé pour le recyclage et la récupération de déchet d’équipement électrique et électronique. Johnson Outdoors

Marine Electronics, Inc. marquera tout équipement électrique et électronique selon la directive WEEE. Nous avons pour but de

respecter le ramassage, le traitement, la récupération et la mise au rebut raisonnable par rapport à l’environnement de ces pro-

duits ; néanmoins, ces exigences varient parmi les pays membres de l’Union européenne. Pour plus de renseignements sur où

mettre au rebut les déchets de votre équipement afin de les recycler ou les récupérer et/ou sur les exigences de votre pays mem-

bre de l’Union européenne, veuillez contacter le concessionnaire ou distributeur de qui vous avez acheté le produit.

Disposition :

Minn Kota les moteurs ne sont pas soumis aux règlements de disposition EAG-VO (la directive d'artifices élec-

trique) qui exécute la directive WEEE. Ne débarrassez-vous quand même jamais de votre Minn Kota le moteur

dans une boîte d'ordures, mais à l'endroit nécessaire de collection de votre conseil municipal local.

Ne débarrassez-vous jamais de la batterie dans une boîte d'ordures. Pliez-vous aux directions de disposition du

fabricant ou de son représentant et débarrassez-vous d'eux à l'endroit nécessaire de collection de votre conseil

municipal local.

Summary of content (8 pages)

PAGE 1
ENVIRONMENTAL COMPLIANCE STATEMENT: It is the intention of Johnson Outdoors Marine Electronics, Inc. to be a responsible corporate citizen, operating in compliance with known and applicable environmental regulations, and a good neighbor in the communities where we make or sell our products. WEEE Directive: EU Directive 2002/96/EC “Waste of Electrical and Electronic Equipment Directive (WEEE)” impacts most distributors, sellers, and manufacturers of consumer electronics in the European Union.
PAGE 2
STOP! This unit is versatile and can be installed using 3 different methods. The Davit and DH-40 can be combined and mounted directly to the bow, they can be combined and mounted to an optional MKA -16-02 quick release plate which can easily be removed from the bow, or the davit and DH-40 can be separated with the davit mounted directly to the bow and the DH-40 mounted at a remote location. What ever mounting method you choose, there are six basic requirements for a proper installation. 1.
PAGE 3
Note: Numbers in ( ) are item numbers referring to parts diagram. 1 69 3 70 2 WINCH AND DAVIT MOUNTED TOGETHER 1. Remove the DH-40 cover ( 47 ) by removing cover screws (49 & 53 ) 2. Carefully place the DH-40 base on the deck of the boat near the bow. 3. Place the davit so the two rear holes line up with the two front holes of the DH-40 base. The rear of the davit lies just inside and on top of the base. 4.
PAGE 4
WINCH AND DAVIT MOUNTED TOGETHER ON OPTIONAL MKA-16-02 PD/AP QUICK RELEASE BRACKET. The DH-40 can be mounted onto the PD/AP Quick Release plate available from any MinnKota retailer. 1. Remove the DH-40 cover ( 47 ) by removing the cover screws ( 49 & 53 ). 2. Place the DH 40 on the slide plate of the Quick Release bracket making sure you align the 2 rear holes with the 2 rear holes in the plate. 3. Mark the location of the 2 front holes in the DH 40 base on the Quick Release bracket slideplate. 4.
PAGE 5
TROUBLESHOOTING 1. Unit fails to operate or lacks power: • Check circuit breaker, be sure button is pressed. If circuit breaker is tripped, investigate the cause of the problem before resetting. • Check battery charge and connections. Be sure terminals are clean and corrosion free. Use a fine grade of sandpaper or emery cloth to clean terminals. • Check your battery water level. Add water if needed. If connections are good and battery has a full charge, obtain service as instructed. 2.
PAGE 6
WINCH AND DAVIT MOUNTED SEPARATE MOUNTING 1. Remove the DH-40 cover ( 47 ) by removing the cover screws ( 49 & 53 ). 2. For remote mounting, place the DH-40 base in your desired location. It is very important that the base is orientated correctly. Be sure that the rope comes straight into the unit at a right angle to the spool shaft. If the rope doesn't come into the unit at a right angle the spool will not load evenly.
PAGE 7
CONTROL SWITCH OPERATIONS Do not operate in normal use with cover off. Three position rocker control switch has UP, DOWN and OFF positions. DOWN powers the anchor down. The gear motor automatically stops when anchor touches bottom. With the control switch in DOWN position, the electronic antidrag system lets out necessary slack to prevent anchor drag. The OFF position locks gear motor and rope. The UP position powers anchor up and retracts anchor into the davit.
PAGE 8
BATTERY CONNECTIONS CAUTION: • Improper polarity hook-up of battery leadwire could cause severe damage to gear motor. • The DeckHand is provided with a sealed control switch and manual resettable circuit breaker. Substituting switches or installing multiple switches other than those provided will void manufacturers warranty. FUNCTION TEST 1. With anchor attached and hanging below davit, push control switch to "UP" position. Anchor should retract into davit.