User`s guide

Installing printer options
9
9-1
9 Installing printer options
The following options are available for your printer:
G Lower feeder unit (Tray 2, 500-sheet capacity)
G Legal and exective/B5 JIS trays for the lower feeder unit
G Face-up tray
G SDRAM DIMM (Dual In-line Memory Module)
9.1 Installing the lower feeder unit (Tray 2)
The lower feeder unit can hold up to 500 sheets of plain paper. It is sup-
plied with either a letter (US) or A4 (Europe) tray (Tray 2).
1
Remove the lower feeder unit from its carton, and then remove the
plastic bag and all shipping materials.
2
Turn the printer off, and then disconnect the power cord and interface
cable from the printer.
3
Place the printer onto the lower feeder unit.
❍ Make sure to align the holes on
the bottom of the printer with the
coupling pins on the lower feed-
er unit.
4
Fill the tray with paper. (For details see chapter 8.)
?
How many sheets of paper may I place on the tray?
➜ Tray 2 has a capacity of 500 sheets of plain paper. The stack of
paper should not rise above the media limit mark.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]