Service Manual

I ADJUSTMENT
25 MODE
1-30
3
7.3 PM Count Setting
This function resets the PM count and sets the PM
cycle. Care should be taken to reset the PM count
properly. The PM count/cycle menu includes the fol-
lowing:
[1. PM count resetting]
[2. PM cycle setting]
[3. Counter clear]
7.3.1 PM count reset
Select whether to reset the count in the PM count
reset screen.
A. Procedure
1. Enter the 25 Mode.
2. “25 mode menu screen”
Press the [2. PM COUNT] key.
3. “PM Count/Cycle Menu screen”
Press the [1. PM count reset] key.
4. “PM Count Reset screen”
Press the [YES] key.
The PM count is reset.
Press the [NO] or [RETURN] key.
The PM count is not reset and returns to the PM
count/cycle menu screen.
7.3.2 Entering PM count start date
When resetting the PM count, it is necessary to
input the start date, and the screen below will
appear automatically.
A. Procedure
1. “PM Count Starting Date Input screen”
Enter a PM count start date from the numeric
keys.
2. Press the [SET] key to enter the data that has
been entered.
3. Press the [RETURN] key to return to the PM
count/cycle menu screen.
Note:
• When pressing the [RETURN] key without press-
ing the [SET] key, the PM count start date is not
changed. It is necessary to reset the count again
for inputting the count.
7.3.3 Setting of PM cycle
Set PM Cycle as follows:
A. Procedure
1. Enter the 25 Mode.
2. “25 mode menu screen”
Press the [2. PM COUNT] key.
3. “PM Count/Cycle Menu screen”
Press the [2. PM CYCLE Set] key.
4. “PM Cycle set screen”
Enter PM cycle from the numeric keys. Enter
upper 3-digit (hundred thousand, ten thousand,
thousand) only.
5. Press the [SET] key to enter a PM cycle that has
been entered.
6. Press the [RETURN] key to return to the PM
count/cycle menu screen.
7.3.4 Counter clear
Reference:
• The operation here is the same as [8. Counter
clear] of the “36 mode menu screen”.
The counter must be cleared whenever the drum or
fixing parts/unit is replaced.
Select the [2. PM Count] and press the [3. Counter
clear] key from the “25 mode menu screen” to dis-
play the counter clear screen.
Following menu options are available from this
screen.
• Drum related counter (Drum counter, Drum drive
counter).
• Fixing related counter (Fixing web counter).
A. Procedure
1. Enter the 25 Mode.
2. “25 mode menu screen”
Press the [2. PM Count] key.