Service Manual

I ADJUSTMENT
47 MODE
1-82
1
FS-113 — 70 13 Staple empty detection sensor 1 No
staples
provided
Staples
provided
— 14 Self-priming sensor 1 Stapler
ready
Stapler
not ready
— 15 Stapler 2 home sensor H.P. Other
than H.P.
— 16 Staple empty sensor 2 No
staples
provided
Staples
provided
— 17 Self-priming sensor 2 Stapler
ready
Stapler
not ready
PWB-F 18 Elevate tray top face sensor Upper
limit
Not at
upper
limit
PC8 19 Elevate tray paper extractor sensor ON OFF
S2, S3 20 Elevate tray upper limit/lower limit
switch
Upper
limit
Not at
upper
limit
PC10 21 Shift home sensor H.P. Other
than H.P.
S4 22 Punch 2-hole/3-hole detection sensor
(inch system only)
2 holes 3 holes
PC15 23 Punch motor pulse sensor ON OFF
PC11 24 Shift motor pulse sensor
RU-101 PS2 27 Passage sensor Paper No paper
FS-114 PC4-FN 70 1 Entrance sensor Paper
exists
No paper
PC5-FN 2 Transport sensor
PC6-FN 3 Alignment home position sensor 1 Home
position
Except home
position
PC7-FN 4 Alignment home position sensor 2
S3-FN 5 Elevate tray upper/lower limit SW Upper
limit
Except
upper limit
S2-FN 6 Shutter detection SW Close Open
S1-FN 7 Front cover open/close detection SW
— 9 Pulse sensor Shade Transmit
PC23-SK 10 In & out guide home position sensor Shade Transmit
PC14-FN 11 Elevator tray lower limit sensor Shade Transmit
PC15-FN 12 Top face detection sensor
— 13 BK-114 detection
Equipped
Not
equipped
PC3-FN 14 Elevator tray position detect sensor Shade Transmit
Classification
Symbol Code Multi code Name Display
ON OFF