Service Manual

DRIVE SECTION
3-3
III DIS./ASSEMBLY
2
2. DRIVE SECTION
2.1 Removing and Reinstalling
the Motor Units (Main, Fix-
ing, Feed, Developing)
Caution:
• Be sure to remove the drum unit from the
main body before removing or reinstalling
the main motor unit. If the drum unit is in
place at this time, the drum will rotate when
you install or remove the drum rotating plate,
resulting in possible damage to the cleaning
blade.
A. Procedure
1. Remove the developing unit and drum unit from
the main body.
2. Remove the screw [1], and remove the cord
cover/B [2].
3. Remove the 2 screws [3], and remove the cord
cover/A [4].
4. Remove the 9 screws [5], and remove the rear
cover [6].
5. Remove the 2 screws [1], and remove the rear
cover/R [2], the rear cover/L [3].
6. Remove the 3 screws [4], and remove the wire-
bundle guide plate [5].
7322ma3001
2
[5]
[3]
[6]
[2][4]
[1]
[3]
[4]
[5]
[1]
[2]
[1]