Installation guide

Windows XP
5. The “Found New Hardware
Wizard” starts up. Select “No,
not this time” and then click
Next.
6. Select “Install from a list or
specific location” as the
method to search for the driver,
and then click Next.
7. Select “Specify a Location” to
set the location to be searched
and click Next.
8. A dialog box for specifying the
copy source of the driver
appears. Click the Browse...
button and specify the folder
where the CS-S10w is
installed.
9. The File Locations dialog
opens. Confirm that the file
name Kmsecs200.inf is
displayed and then click Open.
10. Click OK.
11. Click Next.
The USB driver installation
process starts.
12. This completes the installation
procedure.
Windows 7
5. A message saying “Installing
device driver software” is
displayed in the taskbar at the
bottom right of the screen. Wait
until the driver is installed.
(The driver installation process
may take several minutes.)
6. The installation finishes
automatically and a
notification is displayed in the
taskbar.
7. If you were not able to install
the USB driver using the
procedure above, install it from
Device Manager.
From the Start menu, right-
click “Computer” and select
“Properties” to open Device
Manager. Right click
“CHROMA METER” and
select “Update Driver”. Select
the folder where CS-S10w has
been installed.
8. This completes the installation
procedure.
Windows 8
5. Move the mouse pointer to the
bottom left corner of the
screen, and then right-click in
the window that is displayed.
6. On the menu that appears, click
“Device Manager” to open
Device Manager.
7. Right-click “CHROMA
METER”, click “Update
Driver Software”, and then
click “Browse my computer for
driver software”. For the desti-
nation to search, specify the
name of the folder in which the
software (CS-S10w) has been
installed, and then click Next.
8. This completes the installation
procedure.