Instruction manual

CHAPTER 2 : OPERATION GUIDE
106
Other
Functions
2.10.4 Opening a Data File
You can open the document files (data files) created with the CS-S10w software.
1. Select File - Open from the menu bar.
The Open dialog box appears.
2. Select the type of file to be opened.
The file names of the specified file type are displayed.
3. Select the desired file and click the Open button.
If a file that was created with a list style of Add data by a row unit containing more than 4,000 pieces
of data, is opened with a list style of Add data by a col unit, data exceeding 4,000 pieces will be lost.
When the data file created with CS-S1w is opened
When you select a data file created with the CS-S1w (extension: LMB, LMT, OMB, OMT, LKB, LKT,
OKB, OKT or DAT) and click the Open button, the file is converted into a data file in the CS-S10w for-
mat (extension: .ces). The converted “.ces” file is created in the same folder as the original file and is
opened. If a file with the same name already exists, the name of the new file is prefixed with a tilde (~).
The number of tildes increases as long as there is a file with the same name.
As for DAT files, only the files saved as a sample data list or a target data list can be opened. Note that
the system cannot identify whether the file contains a list of target data or that of measurement data.
Consequently, the file is converted as a list of measurement data.
The CS-S10w can save as many as 5,000 pieces of data with a list style of Add data by a row unit, or
4,000 pieces of data with a list style of Add data by a col unit. Consequently, if a file created with the
CS-S1w contains more pieces of data than these limits, it is divided into separate files that contain data
equal to or less than these limits.