Instruction manual

CHAPTER 2 : OPERATION GUIDE
125
Other
Functions
When the CS-200 is connected
1. Select Instrument - User Calibration from the menu bar.
The User Calibration dialog box appears.
2. Under Lens/ND correction, click the Load button on the right of the Lens text box and load a lens
factor file that has already been saved.
3. Specify the destination in the Select field area and click the Write button. The correction factor is
loaded to the instrument.
When the CS-1000 is connected
1. Select Instrument - User Calibration from the menu bar.
The User Calibration dialog box appears.
2. Click the Load button in the ND to display an Open dialog box. Load a file for a correction factor
that is already stored in the memory.
3. Under ND, select ON.
4. Click the OK button and the ND correction setting is applied.